Custom

[stircrazzzy]

I've got two projects I'm currently working on, and I was wondering if you'd be able to help out.

First the easy one, a pneumag. I was wondering if you could drill and tap an extra hole in my vert asa directly under the barrel to screw the lpr into, and help me figure a way to route the hose back into the grip frame.

Next the less-than-easy one. I have a pre2k pgp that I'm converting to semi. I have actually asked you about this before, and you said no, but I think I have the hard part done for now. I just got a frame with a 3-way in it. The end result I'm looking for is a nickel plated pgp that resembles a palmer semi pgp, with the lpr on the right side and the ram on the left. Could you help out with that? I mean, as far as putting mounts for the lpr and ram on there? Also, a springfeed and any other upgrades you could do would be awesome...

Let me know if you can help out and I can get these both in the mail pretty quick. Thanks.

[Rainman229]

Originally Posted by stircrazzzy

I've got two projects I'm currently working on, and I was wondering if you'd be able to help out.

First the easy one, a pneumag. I was wondering if you could drill and tap an extra hole in my vert asa directly under the barrel to screw the lpr into, and help me figure a way to route the hose back into the grip frame.

Next the less-than-easy one. I have a pre2k pgp that I'm converting to semi. I have actually asked you about this before, and you said no, but I think I have the hard part done for now. I just got a frame with a 3-way in it. The end result I'm looking for is a nickel plated pgp that resembles a palmer semi pgp, with the lpr on the right side and the ram on the left. Could you help out with that? I mean, as far as putting mounts for the lpr and ram on there? Also, a springfeed and any other upgrades you could do would be awesome...

Let me know if you can help out and I can get these both in the mail pretty quick. Thanks.

On the pnuemag. There is a cleaner way of doing it. Use a lp stabilizer or even a gay ion reg. And put a reducer in the asa that go's 1/8 npt to 10-32. Doing it that way you can cut a small channel in the frame for the hose.
Going front mount lpr i uasaully mill the body for a pump mag and drill a hole to send the hose in the frame. But it tends to be a pain putting the gun together . (wow thats a first over ran the buffer while typing)(or not).

semi pgp. I still have a few rams mount left. The reg mounting is not a big deal. The spring feed is easy.

Only problem is my time is limited. I have no clue when i could do it.

[stircrazzzy]

Ok, well that's cool. If you want to just let me know when you have time to do some of this stuff, I'll send it out. In the mean time I'll just keep it around here to tinker with. Thanks man!