|
             |
 |
|
| Rainman's Custom Corner MCB member Rainman229, does some excellent custom work. See what he can do for you... |
 |
| | LinkBack | Thread Tools | Search this Thread |
03-27-2008, 10:59 AM
| #1 (permalink) |
| Rec Poster Join Date: May 2007 | SS25 SC Feed idea. Rainman, I have a project I was looking to get an estimate on or at least some good direction. I would like to see if you can build out of delrin a stock class feed block (best description I can think of) that is angled up at about 3-5* and would use the ten round tube instead of an aluminum feed tube. I saw one once built out of aluminum but thought delrin should work just as well. And all this built to bolt onto an SS25. Let me know- appreciate it. |
|  |
|
03-27-2008, 03:45 PM
| #2 (permalink) |
| A god in my own mind Join Date: Apr 2006 Location: nj  | It could be done. But 2 things to consider delrin cost and ii don't have a ss25 to work with. I have plastic thats cheaper then delrin that works just as good
__________________ Email lastone75@aol.com  Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229 |
| |
|
03-27-2008, 04:22 PM
| #3 (permalink) |
| Rec Poster Join Date: May 2007 | Anyting that has the strength required would be great- black is perfect. If I sent you a wevo ss25 SC feed to work from for the hole pattern would that work? let me know, I am loathe to ship my ss25... Thanks for responding Last edited by mojojojoaf; 03-27-2008 at 04:24 PM.. Reason: thanks! |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
