hey rainman i need some custom pgp parts

dauntless15 · 06-17-2008, 04:24 PM

well im in a pickle .

im building the smallest pgp i can and i hit a few road blocks . one .

the part of a non cartridge valve when the co2 12 gram gets pirced . there is a small pice of metal . its the first pice you put in when re assembleing the valve . i need to eather tap that pice or have you make a new littil pice whenre it accepts standerd macroline fittings . and also . is there any way that you can put a 12 gram changer in the handel of a pgp ? or a cocker handel i geuss? that i can screw the 12 gram right into the hanged and its conected thrue hardline or macroline to the valve . ? let me know

thankxs

chris vb

dauntless15 · 06-17-2008, 08:11 PM

any idea if this can be done ?

Rainman229 · 06-17-2008, 11:29 PM

One the first part. The stock part has enough meat to drill and tap. Only issue is Getting the fitting in tight enough. As it will spin even with the jam nut in. You would need some kind of set screw to hold it in place.

As for the 12 gram in the frame. Can be done but not sure if the end result would be worth the cost.

dauntless15 · 06-17-2008, 11:58 PM

well the fitting is gonna be eather a straight macro line or a right angle . most likely a right angle . do you think you could make oa pice up and ship it to me ? pm me the price . or i can probly ship u m pice . . i live in nj also

Rainman229 · 06-18-2008, 02:03 AM

Cost you same to drop it off as to ship it. lol. But i may have a spare one.

dauntless15 · 06-18-2008, 09:01 AM

that whould be great. let me know when you can do it

dauntless15 · 06-23-2008, 11:41 AM

when can you have that part done ?

Rainman229 · 06-23-2008, 12:45 PM

Like i though. Getting a fitting on it once it's in is impossible. You will need to run it with a straight fitting out of it. But i have it done.

dauntless15 · 06-23-2008, 10:10 PM

kool how much is gonna cost . and i already have the stright parts . i have the design all donw . i just need to do a littil coutting of the body yet . pm me with the info

06-17-2008, 04:24 PM	#1 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	hey rainman i need some custom pgp parts well im in a pickle . im building the smallest pgp i can and i hit a few road blocks . one . the part of a non cartridge valve when the co2 12 gram gets pirced . there is a small pice of metal . its the first pice you put in when re assembleing the valve . i need to eather tap that pice or have you make a new littil pice whenre it accepts standerd macroline fittings . and also . is there any way that you can put a 12 gram changer in the handel of a pgp ? or a cocker handel i geuss? that i can screw the 12 gram right into the hanged and its conected thrue hardline or macroline to the valve . ? let me know thankxs chris vb

06-17-2008, 11:29 PM	#3 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	One the first part. The stock part has enough meat to drill and tap. Only issue is Getting the fitting in tight enough. As it will spin even with the jam nut in. You would need some kind of set screw to hold it in place. As for the 12 gram in the frame. Can be done but not sure if the end result would be worth the cost. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-18-2008, 02:03 AM	#5 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	Cost you same to drop it off as to ship it. lol. But i may have a spare one. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-23-2008, 12:45 PM	#8 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	Like i though. Getting a fitting on it once it's in is impossible. You will need to run it with a straight fitting out of it. But i have it done. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-17-2008, 08:11 PM	#2 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	any idea if this can be done ?

06-17-2008, 11:58 PM	#4 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	well the fitting is gonna be eather a straight macro line or a right angle . most likely a right angle . do you think you could make oa pice up and ship it to me ? pm me the price . or i can probly ship u m pice . . i live in nj also

06-18-2008, 09:01 AM	#6 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	that whould be great. let me know when you can do it

06-23-2008, 11:41 AM	#7 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	when can you have that part done ?

06-23-2008, 10:10 PM	#9 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	kool how much is gonna cost . and i already have the stright parts . i have the design all donw . i just need to do a littil coutting of the body yet . pm me with the info