PGP project...?

stircrazzzy · 06-22-2008, 07:51 PM

Hey Rainman, I asked you about this once before several months ago, and you said you'd be able to do it sometime, just not sure when since you were pretty backed up. Figure'd I would ask again. Here goes:

I have a 2k1 PGP that is basically new, no mods have been done to it at all, but I did put a typhoon grip frame with 4-way in it. As you can see, I'm interested in building a semi

I have palmer pneus already, the grip has a 4-way, all I really need is someone who can do the clean welds and make sure it all works. Also, if you could make it a spring-feed, that would be killer...and mount the lpr on the side since i'd prefer to keep it 12-gram. If you could do this, I'd appreciate it a lot. The only other thing I'd want to do to it is have it nickel plated, other than that, I think it would be good to go. Thanks man.

Rainman229 · 06-22-2008, 08:17 PM

You lost me a the 12 gram part. I'd rather not have any part of that. Plus on a 2k1 side mounting the lpr is impossible since its a cartridge valve.

stircrazzzy · 06-22-2008, 09:38 PM

Ah, that sucks. I guess I'd be ok with running a bottomline or something in that case...running a remote would still make it feel pistol-ish. Heck, when I carry my M9 in the field it is tied off to my leg anyway, so it'll feel like that.

06-22-2008, 07:51 PM	#1 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	PGP project...? Hey Rainman, I asked you about this once before several months ago, and you said you'd be able to do it sometime, just not sure when since you were pretty backed up. Figure'd I would ask again. Here goes: I have a 2k1 PGP that is basically new, no mods have been done to it at all, but I did put a typhoon grip frame with 4-way in it. As you can see, I'm interested in building a semi I have palmer pneus already, the grip has a 4-way, all I really need is someone who can do the clean welds and make sure it all works. Also, if you could make it a spring-feed, that would be killer...and mount the lpr on the side since i'd prefer to keep it 12-gram. If you could do this, I'd appreciate it a lot. The only other thing I'd want to do to it is have it nickel plated, other than that, I think it would be good to go. Thanks man.

06-22-2008, 08:17 PM	#2 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,834	You lost me a the 12 gram part. I'd rather not have any part of that. Plus on a 2k1 side mounting the lpr is impossible since its a cartridge valve. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-22-2008, 09:38 PM	#3 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	Ah, that sucks. I guess I'd be ok with running a bottomline or something in that case...running a remote would still make it feel pistol-ish. Heck, when I carry my M9 in the field it is tied off to my leg anyway, so it'll feel like that.