Ready for a Pneumag!

angelpena · 06-24-2008, 01:43 PM

Claudio!

I'm in no hurry but I have the parts, and the $$$ for a pneunmag conversion on my R/T.

I have a couple PPS LPR's to choose from, I'm thinking the micro rock is th one to go with.

AND here is the Clincher I have a Benchmark Single trigger frame, will this work?

The frame is also made for the older rail so it has wings on it, so they will need to be milled off? I'll look at my R/T when I get home. if so I'll need to re-anno...

I'm in no hurry, and since I have $$$ I may have you do some extras to it as well.

I may send you my rainmaker too, it has a laundry list of needs....

himurax13 · 07-04-2008, 11:45 PM

How much is the pneumag conversion?

funsi00 · 07-05-2008, 12:02 AM

I think it has to be a two finger trigger or intelliframe. When I had one it was based on a PTP two finger trigger frame with a different trigger.

Rainman229 · 07-05-2008, 12:16 AM

I can do a single. May not be pretty in the frame. But it can be done.

Clearush · 07-05-2008, 03:15 AM

the micro rock fits real nice

Cocker Master · 07-05-2008, 01:19 PM

can you do a pneumag conversion with a y frame?

Rainman229 · 07-05-2008, 03:16 PM

As long as you don't care what it looks like in side the frame. I can do just about any frame. With the lpr mounted out side.

Cocker Master · 07-05-2008, 05:10 PM

What about with the lpr, and everything else, inside the frame?

angelpena · 07-06-2008, 01:16 AM

Pretty on the inside of the frame doesn't matter, just the end results!

if it's possible to put the LPR inside as well I'd like to do it,

how much would you like me to put down on it to get started?

I can mail it out to you this next week!

Rainman229 · 07-06-2008, 03:38 AM

Just get in the mail we'll discuses the rest later

06-24-2008, 01:43 PM	#1 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM Posts: 1,090	Ready for a Pneumag! Claudio! I'm in no hurry but I have the parts, and the $$$ for a pneunmag conversion on my R/T. I have a couple PPS LPR's to choose from, I'm thinking the micro rock is th one to go with. AND here is the Clincher I have a Benchmark Single trigger frame, will this work? The frame is also made for the older rail so it has wings on it, so they will need to be milled off? I'll look at my R/T when I get home. if so I'll need to re-anno... I'm in no hurry, and since I have $$$ I may have you do some extras to it as well. I may send you my rainmaker too, it has a laundry list of needs.... __________________ Looks like I picked the wrong week to quit gun whorring... Last edited by angelpena; 06-24-2008 at 01:54 PM.

07-05-2008, 12:16 AM	#4 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,788	I can do a single. May not be pretty in the frame. But it can be done. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

07-05-2008, 03:15 AM	#5 (permalink)
Clearush MCB Member Join Date: Mar 2006 Location: HTown, TX Posts: 1,457	the micro rock fits real nice __________________ Carter's Commando Texas division The White Board Comic My SCP Feedback Ebay Feedback MCB Feedback

07-05-2008, 03:16 PM	#7 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,788	As long as you don't care what it looks like in side the frame. I can do just about any frame. With the lpr mounted out side. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

07-06-2008, 01:16 AM	#9 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM Posts: 1,090	Pretty on the inside of the frame doesn't matter, just the end results! if it's possible to put the LPR inside as well I'd like to do it, how much would you like me to put down on it to get started? I can mail it out to you this next week! __________________ Looks like I picked the wrong week to quit gun whorring...

07-05-2008, 12:02 AM	#3 (permalink)
funsi00 MCB Member Join Date: Jul 2006 Posts: 415	I think it has to be a two finger trigger or intelliframe. When I had one it was based on a PTP two finger trigger frame with a different trigger.

07-05-2008, 01:19 PM	#6 (permalink)
Cocker Master MCB Member Join Date: Feb 2008 Posts: 145	can you do a pneumag conversion with a y frame?

07-05-2008, 05:10 PM	#8 (permalink)
Cocker Master MCB Member Join Date: Feb 2008 Posts: 145	What about with the lpr, and everything else, inside the frame?

07-06-2008, 03:38 AM	#10 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,788	Just get in the mail we'll discuses the rest later __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search