Small custom part.

Contour · 06-28-2008, 05:09 PM

The part I would need has to be press fit into a clippard mpa ram piston. Or it could threaded if you wanted to thread the piston. It would need to hold a 3 way rod. I don't have the part drawn up yet and I'm just looking for a basic quote or what you think of the idea.

Here is the thread describing the project I have in mind.
Autococker pneumatic trigger idea, again!

Rainman229 · 06-29-2008, 04:16 PM

By looking at it. I think you would need a custom piston made for it. Can be done won't be cheap. Since making small parts is a pain.

Contour · 06-29-2008, 04:20 PM

I think I may design something, what format would be the best for you? Or just a tech drawing?

Rainman229 · 06-29-2008, 04:33 PM

I can use main formats. Just need a plain 2d tech drawing.

Contour · 06-29-2008, 05:56 PM

Looks like I may have figured out a way to do this with on the shelf parts, I'll get back to you if I decide that I need some more custom parts.

Side note, do you know if it would be possible to use brass tubing or a hardline thats brass plated for pneumatics etc?

06-28-2008, 05:09 PM	#1 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 274	Small custom part. The part I would need has to be press fit into a clippard mpa ram piston. Or it could threaded if you wanted to thread the piston. It would need to hold a 3 way rod. I don't have the part drawn up yet and I'm just looking for a basic quote or what you think of the idea. Here is the thread describing the project I have in mind. Autococker pneumatic trigger idea, again! __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

06-29-2008, 04:16 PM	#2 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	By looking at it. I think you would need a custom piston made for it. Can be done won't be cheap. Since making small parts is a pain. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-29-2008, 04:20 PM	#3 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 274	I think I may design something, what format would be the best for you? Or just a tech drawing? __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

06-29-2008, 04:33 PM	#4 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj Posts: 2,800	I can use main formats. Just need a plain 2d tech drawing. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-29-2008, 05:56 PM	#5 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 274	Looks like I may have figured out a way to do this with on the shelf parts, I'll get back to you if I decide that I need some more custom parts. Side note, do you know if it would be possible to use brass tubing or a hardline thats brass plated for pneumatics etc? __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search