Autococker bolt mod?

ironchef97 · 12-31-2008, 05:53 AM

Hi, can you do a bolt coversion? Specifically, making a dye reflex autococker's twistlock aluminum bolt into a delrin one? Like so here:

WGP Autococker Dye Reflex pump with delrin bolt - eBay (item 110328022584 end time Dec-21-08 10:11:57 PST)

Or designing one entirely ground up to fit?
Thanks!

Rainman229 · 12-31-2008, 02:46 PM

Doing the bolt is the easy part. The back block is the hard part. Wouldn't even know were to start on that.

patentpending · 12-31-2008, 03:35 PM

It doesn't look like anything needs to be done to the back block, just putting a delrin front on the bolt

ironchef97 · 01-01-2009, 04:32 AM

yea, that's what I mean. like cutting the first 2/3 of the bolt off, and modeling a delrin bolt after it, and attaching it to the back 1/3(which is the twistlock part). Or making one completely out of delrin?

Rainman229 · 01-01-2009, 06:47 AM

Totally miss read that.(at least someone was paying attention)

Making a whole bolt shouldn't be all that hard. Would more then likely be easiest of 2

chrisshanks · 01-03-2009, 05:09 PM

If you could do like in that Ebay picture (or close to it) - I'd take two & send you in my two bolts right away to modify

please let me know

or you can PM me if you like

-chris

12-31-2008, 05:53 AM	#1 (permalink)
ironchef97 MCB Member Join Date: Sep 2008	Autococker bolt mod? Hi, can you do a bolt coversion? Specifically, making a dye reflex autococker's twistlock aluminum bolt into a delrin one? Like so here: WGP Autococker Dye Reflex pump with delrin bolt - eBay (item 110328022584 end time Dec-21-08 10:11:57 PST) Or designing one entirely ground up to fit? Thanks!

12-31-2008, 02:46 PM	#2 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Doing the bolt is the easy part. The back block is the hard part. Wouldn't even know were to start on that. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

12-31-2008, 03:35 PM	#3 (permalink)
patentpending Cunning Linguist Join Date: Sep 2006	It doesn't look like anything needs to be done to the back block, just putting a delrin front on the bolt __________________ Freedom isn't free......It's like 10 bucks a gram

01-01-2009, 06:47 AM	#5 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Totally miss read that.(at least someone was paying attention) Making a whole bolt shouldn't be all that hard. Would more then likely be easiest of 2 __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-01-2009, 04:32 AM	#4 (permalink)
ironchef97 MCB Member Join Date: Sep 2008	yea, that's what I mean. like cutting the first 2/3 of the bolt off, and modeling a delrin bolt after it, and attaching it to the back 1/3(which is the twistlock part). Or making one completely out of delrin?

01-03-2009, 05:09 PM	#6 (permalink)
chrisshanks Active Member Join Date: Sep 2006	If you could do like in that Ebay picture (or close to it) - I'd take two & send you in my two bolts right away to modify please let me know or you can PM me if you like -chris