centerfeed conversion on autococker (hitman pictures added) - Page 2

roughdraftx01 · 06-15-2007, 11:24 AM

rainman.. ive been looking for feednecks that are "angel threaded" and it seems there are only ones that actually go into the body? I guess the neck is attached to the stock class feed and is removable or does the SC feed come off alone and I am not looking in the right place to find one that just caps on the newly threaded centerfeed neck? Never personally delt with any threads but cocker and impulse

blackrain · 06-15-2007, 11:46 AM

Claudio,
PM me a price for that SC feed. I have an idea to use it with.
Later,
Blackrain

Rainman229 · 06-15-2007, 02:30 PM

The stockclass feed is actauly held on by the bodys exciting sight rail. it slides right on to it. There are 2 setscrews that hold it in place. Theres acatauly a paper thin space between whats left of the old feed neck and the stockclass feed.

Any angel threaded feed neck will work. I'll try look you up a feed neck. The old feed neck sleeve is threaded for it.

paintballwannab · 06-15-2007, 07:58 PM

Rainman the new CCM plate with the hitman mod, would you consider making another one of them?

That would be nice to have one to just bolt to my CCM kit and be able to switch back at a later date.

roughdraftx01 · 06-16-2007, 02:55 AM

hey rain

just curious to whats going on at the moment with your ideas for the handle on the new guide plate? Don't know what you have in mind but you know instead of the usual spot where people drill holes for the mod? was thinking that the handle should start near the center of the plate as possible and come down to where its still comfortable/easily grabed while still holding the reg. So the pulling force when you use it is pretty much centered compared to it usually being on the bottom portion of the pump kit. Other than that.. I trust your creativity

and it seems other members of this forum are interested in both the feed and hitman mod for their own ideas... awesome stuff

also..i tried out my friends pump which hand a hitman mod on it.. it seems I use my pointing and index finger( first 2 fingers to use the handle) while having the rest of my hand still gripped onto the reg during tight spots behind bunkers. I have medium-ish hands.. so my finger reach isnt too far. Maybe it'll help out the desgin

Oh yea.. if its no trouble to.. would it be possible for you to slightly round the bottom of the hammer? I kinda want the trigger pull a bit smoother. When you cock it and slowly press the trigger you can feel a little grind before it releases the cocking rod.

Rainman229 · 06-16-2007, 04:27 AM

Quote:

Originally Posted by paintballwannab

Rainman the new CCM plate with the hitman mod, would you consider making another one of them?

That would be nice to have one to just bolt to my CCM kit and be able to switch back at a later date.

If they work out i may be make a few to stock.

Rainman229 · 06-16-2007, 04:32 AM

Quote:

Originally Posted by roughdraftx01

hey rain

just curious to whats going on at the moment with your ideas for the handle on the new guide plate? Don't know what you have in mind but you know instead of the usual spot where people drill holes for the mod? was thinking that the handle should start near the center of the plate as possible and come down to where its still comfortable/easily grabed while still holding the reg. So the pulling force when you use it is pretty much centered compared to it usually being on the bottom portion of the pump kit. Other than that.. I trust your creativity

and it seems other members of this forum are interested in both the feed and hitman mod for their own ideas... awesome stuff

also..i tried out my friends pump which hand a hitman mod on it.. it seems I use my pointing and index finger( first 2 fingers to use the handle) while having the rest of my hand still gripped onto the reg during tight spots behind bunkers. I have medium-ish hands.. so my finger reach isnt too far. Maybe it'll help out the desgin

Oh yea.. if its no trouble to.. would it be possible for you to slightly round the bottom of the hammer? I kinda want the trigger pull a bit smoother. When you cock it and slowly press the trigger you can feel a little grind before it releases the cocking rod.

The new plate is drawn up. Need to do a test run of to see how close i am on my measurments. Will hopefully get to run it sunday.

roughdraftx01 · 06-17-2007, 10:14 PM

how did it go today?

Rainman229 · 06-17-2007, 10:17 PM

Well ran it off today. After altering the code alittle got it all worked out. pictures later

Rainman229 · 06-17-2007, 11:57 PM

Hitman mod added. cnc'ed new guide plate for pump

06-15-2007, 11:46 AM	#12 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	Claudio, PM me a price for that SC feed. I have an idea to use it with. Later, Blackrain __________________ Visit my Sponsor page: http://www.mcarterbrown.com/forums/t...y-sponsor.html "When all else fails, pull the pin and see what happens next" Follow Team Blackrain on Face Book: http://www.facebook.com/#!/profile.p...00000734844527 Best Auto cocker info ever Just like to make crazy stuff for paintball? Click here My feedback How Paintballs are made

06-15-2007, 02:30 PM	#13 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	The stockclass feed is actauly held on by the bodys exciting sight rail. it slides right on to it. There are 2 setscrews that hold it in place. Theres acatauly a paper thin space between whats left of the old feed neck and the stockclass feed. Any angel threaded feed neck will work. I'll try look you up a feed neck. The old feed neck sleeve is threaded for it. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-16-2007, 02:55 AM	#15 (permalink)
roughdraftx01 Newbie Join Date: Jun 2007	hey rain just curious to whats going on at the moment with your ideas for the handle on the new guide plate? Don't know what you have in mind but you know instead of the usual spot where people drill holes for the mod? was thinking that the handle should start near the center of the plate as possible and come down to where its still comfortable/easily grabed while still holding the reg. So the pulling force when you use it is pretty much centered compared to it usually being on the bottom portion of the pump kit. Other than that.. I trust your creativity and it seems other members of this forum are interested in both the feed and hitman mod for their own ideas... awesome stuff also..i tried out my friends pump which hand a hitman mod on it.. it seems I use my pointing and index finger( first 2 fingers to use the handle) while having the rest of my hand still gripped onto the reg during tight spots behind bunkers. I have medium-ish hands.. so my finger reach isnt too far. Maybe it'll help out the desgin Oh yea.. if its no trouble to.. would it be possible for you to slightly round the bottom of the hammer? I kinda want the trigger pull a bit smoother. When you cock it and slowly press the trigger you can feel a little grind before it releases the cocking rod. Last edited by roughdraftx01; 06-16-2007 at 03:18 AM.

06-17-2007, 10:17 PM	#19 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Well ran it off today. After altering the code alittle got it all worked out. pictures later __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-17-2007, 11:57 PM	#20 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Hitman mod added. cnc'ed new guide plate for pump __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

06-15-2007, 11:24 AM	#11 (permalink)
roughdraftx01 Newbie Join Date: Jun 2007	rainman.. ive been looking for feednecks that are "angel threaded" and it seems there are only ones that actually go into the body? I guess the neck is attached to the stock class feed and is removable or does the SC feed come off alone and I am not looking in the right place to find one that just caps on the newly threaded centerfeed neck? Never personally delt with any threads but cocker and impulse

06-17-2007, 10:14 PM	#18 (permalink)
roughdraftx01 Newbie Join Date: Jun 2007	how did it go today?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search