Pump Mag?

chairman_mao · 06-21-2007, 11:22 AM

How diddily do? I heard you were the man to see for custom projects. I am looking to build a pump mag and will need some custom work done. I have been unsuccessful in attaining an AGD pump kit, so my first question will be; can you fabricate or modify a pump set up to work with the mag?

Also I would be looking to have the rail milled to accept the pump rail see here for a better description than I can provide. I have an AGD factory milled pump body so that is set.

If possible, I would like to remove the p/f left from the body and replace it with a stock class feed. I think this may be a bit more of a pipe dream but I'm gonna ask anyway.

You can reach me here or @ adam.burninator@gmail.com with any questions or what not. Thanks for your time.

Schmitti · 06-21-2007, 11:27 AM

Not to knock Rainman's ability.... but removing the feeds from Mag bodies is a royal pia and can lead to serious distortion and possible damage to the body itself..... basically there is a lot of work that needs to go into removing the stainless steel feed from the stainless steel body... that and you will probably need to have the body polished afterwords to remove any discoloration that occurs... when Tom designed those bodies he never meant for them to come apart.

E

chairman_mao · 06-21-2007, 11:59 AM

Yeah I understand that, which is why I listed it as if possible. I know there is at least one guy over on AO that does p/f to vert conversions on ss bodies and does them very well. So I figured it was worth asking and as I understand it if Rainman can't do it he'll say so.

Nothing is gained by not asking. But thanks for the heads up.

Rainman229 · 06-21-2007, 02:52 PM

Quote:

Originally Posted by chairman_mao

How diddily do? I heard you were the man to see for custom projects. I am looking to build a pump mag and will need some custom work done. I have been unsuccessful in attaining an AGD pump kit, so my first question will be; can you fabricate or modify a pump set up to work with the mag?

Yes i could make a pump kit for them.

Quote:

Originally Posted by chairman_mao

Also I would be looking to have the rail milled to accept the pump rail see here for a better description than I can provide. I have an AGD factory milled pump body so that is set.

To easy. Have it set up for cnc.

Quote:

Originally Posted by chairman_mao

If possible, I would like to remove the p/f left from the body and replace it with a stock class feed. I think this may be a bit more of a pipe dream but I'm gonna ask anyway.

Would be easier to start off with a center feed body. Agd still has center feed bodys in stock. Many difrent ways to do a stockclass feed.

chairman_mao · 06-21-2007, 04:12 PM

Quote:

Originally Posted by Rainman229

Yes i could make a pump kit for them.

To easy. Have it set up for cnc.

Would be easier to start off with a center feed body. Agd still has center feed bodys in stock. Many difrent ways to do a stockclass feed.

I see, if I purchase a center feed what are we looking at cost and time wise to do all the milling and creating the pump kit?

Rainman229 · 06-21-2007, 04:24 PM

Quote:

Originally Posted by chairman_mao

I see, if I purchase a center feed what are we looking at cost and time wise to do all the milling and creating the pump kit?

To be honest about 3 or 4 months. But that could change since it's normaly my slow season now.(not to much coming in as in the fall and winter)

Pump kit
you would be looking at around $150 to $175

Milling
$50 for body and rail

Stockclass feed
around $100

plus shipping

chairman_mao · 06-21-2007, 04:58 PM

I think the stock class feed is a bit rich for my right now but I would like to do the pump kit and rail milling. What payment methods do you accept?

I'm waiting for a few parts to be in my possestion then I will send off to you

Body
Rail
Trigger Frame
Sear
Valve

Is there anything else I will need to include? Perhaps the barrel? I'm fairly open as far as aesthetics go but I shoot mags so nothing too fancy (I'm kind of into the utilitarian look).

I look forward to doing business with you.

Rainman229 · 06-21-2007, 06:12 PM

Thats about it

06-21-2007, 11:22 AM	#1 (permalink)
chairman_mao Rec Poster Join Date: Jun 2007	Pump Mag? How diddily do? I heard you were the man to see for custom projects. I am looking to build a pump mag and will need some custom work done. I have been unsuccessful in attaining an AGD pump kit, so my first question will be; can you fabricate or modify a pump set up to work with the mag? Also I would be looking to have the rail milled to accept the pump rail see here for a better description than I can provide. I have an AGD factory milled pump body so that is set. If possible, I would like to remove the p/f left from the body and replace it with a stock class feed. I think this may be a bit more of a pipe dream but I'm gonna ask anyway. You can reach me here or @ adam.burninator@gmail.com with any questions or what not. Thanks for your time.

06-21-2007, 11:27 AM	#2 (permalink)
Schmitti Red=Moderator Join Date: Apr 2006 Location: Schen. NY	Not to knock Rainman's ability.... but removing the feeds from Mag bodies is a royal pia and can lead to serious distortion and possible damage to the body itself..... basically there is a lot of work that needs to go into removing the stainless steel feed from the stainless steel body... that and you will probably need to have the body polished afterwords to remove any discoloration that occurs... when Tom designed those bodies he never meant for them to come apart. E __________________ KD2BLZ

06-21-2007, 06:12 PM	#8 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Thats about it __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-21-2007, 11:59 AM	#3 (permalink)
chairman_mao Rec Poster Join Date: Jun 2007	Yeah I understand that, which is why I listed it as if possible. I know there is at least one guy over on AO that does p/f to vert conversions on ss bodies and does them very well. So I figured it was worth asking and as I understand it if Rainman can't do it he'll say so. Nothing is gained by not asking. But thanks for the heads up.

06-21-2007, 04:58 PM	#7 (permalink)
chairman_mao Rec Poster Join Date: Jun 2007	I think the stock class feed is a bit rich for my right now but I would like to do the pump kit and rail milling. What payment methods do you accept? I'm waiting for a few parts to be in my possestion then I will send off to you Body Rail Trigger Frame Sear Valve Is there anything else I will need to include? Perhaps the barrel? I'm fairly open as far as aesthetics go but I shoot mags so nothing too fancy (I'm kind of into the utilitarian look). I look forward to doing business with you.