Semi PGP 2k1 w/ Sergison K-frame

Skantz · 12-30-2008, 01:03 PM

Hello Rainman,

I have just acquired a PGP 2k1 w a k-frame and would love to do a semi job on it -- I personally don't have a preference for whether the pneu placement, just want something that looks clean and neat.

The top tube has been hacked up a bit (not by myself) and will probably get removed and replaced with a collar and direct feed. Down the line, I will also probably get it nickel plated.

Below is an image of the marker in question:

Let me know what you think is possible

Thanks a bunch

Rainman229 · 12-30-2008, 11:39 PM

Ok were to start.

The k-frame Seen one up close. Not much room to work with for pneumatics internal. And being how the trigger mechanism is setup That's the correct way to go with the frame for semi use.

Then there always even if you did get the pneumatics to work with the frame. You still have the big issue How do you get the k-frames design to Work timing it. There's no way to make the sear trip faster then it's design allows. In A cocker your tripping the sear in the first few mm of the pull. The rest of the total pull is to recock the marker. So with out being able to adjust that. Theres really not much you can do with it.

Skantz · 12-31-2008, 07:20 AM

Rainman,

Thanks for the speedy reply -- this project is a no go due to technical restraints.

Any love in general you could show this PGP? spring feed, potential 12gr dropout, etc.

I wanna give it the TLC it needs...

CB103 · 12-31-2008, 09:30 AM

If you really have your heart set on making it a semi, try talking to sergison about a more pneumatic friendly frame. I don't have a link right now, but I'm absolutely certain there's at least one k-framed stroker floating around.

Skantz · 12-31-2008, 04:55 PM

Yep - there is a k-framed stroker that 10-shot has but I'm not dead set on a semi, it'd be cool but I'm not heartbroken by it.

I wanted to turn this into my sidearm with my NX lever -- which is still possible as a pump

Thanks for the info bud

Chaos · 12-31-2008, 06:47 PM

Only Semi Kframe I've seen is that Stroker and it was done by Sergison

dsergison · 01-05-2009, 10:00 PM

i've made semi's. two of them.

royal pain in my ***. but they are awesome.

i'm real backed up right now. maybe in a few months i can take on more work.

Thanks,

Rainman229 · 01-05-2009, 11:55 PM

Quote:

Originally Posted by dsergison

i've made semi's. two of them.
http://sergisonmachine.net/images/semi_k-frames.jpg

royal pain in my ***. but they are awesome.

i'm real backed up right now. maybe in a few months i can take on more work.

Thanks,

Nice work. Look like more then a pain in the arse

12-30-2008, 01:03 PM	#1 (permalink)
Skantz Now w/ 30% less packaging Join Date: Aug 2007 Location: Brooklyn, NY	Semi PGP 2k1 w/ Sergison K-frame Hello Rainman, I have just acquired a PGP 2k1 w a k-frame and would love to do a semi job on it -- I personally don't have a preference for whether the pneu placement, just want something that looks clean and neat. The top tube has been hacked up a bit (not by myself) and will probably get removed and replaced with a collar and direct feed. Down the line, I will also probably get it nickel plated. Below is an image of the marker in question: Let me know what you think is possible Thanks a bunch __________________ Trades/Sales\| Tac8 w/ UMS TRG + FS Ready WTB\|N/A/T/M Feedback\| EBay\|MCB

12-30-2008, 11:39 PM	#2 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Ok were to start. The k-frame Seen one up close. Not much room to work with for pneumatics internal. And being how the trigger mechanism is setup That's the correct way to go with the frame for semi use. Then there always even if you did get the pneumatics to work with the frame. You still have the big issue How do you get the k-frames design to Work timing it. There's no way to make the sear trip faster then it's design allows. In A cocker your tripping the sear in the first few mm of the pull. The rest of the total pull is to recock the marker. So with out being able to adjust that. Theres really not much you can do with it. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

12-31-2008, 07:20 AM	#3 (permalink)
Skantz Now w/ 30% less packaging Join Date: Aug 2007 Location: Brooklyn, NY	Rainman, Thanks for the speedy reply -- this project is a no go due to technical restraints. Any love in general you could show this PGP? spring feed, potential 12gr dropout, etc. I wanna give it the TLC it needs... __________________ Trades/Sales\| Tac8 w/ UMS TRG + FS Ready WTB\|N/A/T/M Feedback\| EBay\|MCB

12-31-2008, 04:55 PM	#5 (permalink)
Skantz Now w/ 30% less packaging Join Date: Aug 2007 Location: Brooklyn, NY	Yep - there is a k-framed stroker that 10-shot has but I'm not dead set on a semi, it'd be cool but I'm not heartbroken by it. I wanted to turn this into my sidearm with my NX lever -- which is still possible as a pump Thanks for the info bud __________________ Trades/Sales\| Tac8 w/ UMS TRG + FS Ready WTB\|N/A/T/M Feedback\| EBay\|MCB

12-31-2008, 06:47 PM	#6 (permalink)
Chaos I'm Comin' To Getcha! Join Date: Mar 2006 Location: Hudson,MA	Only Semi Kframe I've seen is that Stroker and it was done by Sergison __________________ Chaos PoG Member # 1018 LPPC Member #71 NO'MAAM #5 My Gallery My Feedback

12-31-2008, 09:30 AM	#4 (permalink)
CB103 Active Member Join Date: Oct 2006 Location: Ontario, Canada	If you really have your heart set on making it a semi, try talking to sergison about a more pneumatic friendly frame. I don't have a link right now, but I'm absolutely certain there's at least one k-framed stroker floating around.

01-05-2009, 10:00 PM	#7 (permalink)
dsergison Rec Poster Join Date: Sep 2006	i've made semi's. two of them. royal pain in my ***. but they are awesome. i'm real backed up right now. maybe in a few months i can take on more work. Thanks, __________________ http://www.sergisonmachine.net

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search