mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Rare, Old Guns (http://www.mcarterbrown.com/forums/rare-old-guns/)
-   -   Vector Parts Kits (http://www.mcarterbrown.com/forums/rare-old-guns/112962-vector-parts-kits.html)

J-Man 03-20-2010 10:31 PM

Vector Parts Kits
 
Parts Kits, Spring/Seal Upgrade Kits, Stainless Steel Screw Kits, and Push-Button Safety Kits are still available for the Airpower Vector:

- The Parts Kit includes most any small part you might ever need for the Vector. Included are a dozen Adapter Body o-rings and an aluminum alloy Bolt Slider Pin. The alloy pin reduces reciprocating weight as well as being resistant to falling out inadvertently when the barrel is removed (and it's easier to see in the grass if it does happen). $40

- The Spring/Seal Upgrade Kit is designed for "Thruster Ready" Vectors that use an external regulator for velocity adjustment. It can also work with "Back-Bottle" (internally adjusted) Vectors but you'll need to use your original Valve Spring. The kit comes with three different weight Main Springs, a special stainless Valve Spring, a LAPCO Cup Seal, and some o-rings. I HIGHLY recommend this kit for long term reliability of the Vector.
The Main Springs are very rare, authentic Straight Shot Nelson-style (the best ever made) and come in three different weights- Yellow, Green, and Blue.
The 8-32 threaded Spyder LAPCO Cup Seal provides lighter weight for less valve bounce and greater efficiency. Also, if the cup ever happens to inadvertently loosen and back off then the all plastic LAPCO seal will not damage the Shaft and/or Valve Seat. It also has a larger spring register on the back to interface better with the new Valve Spring to help prevent kinking (a very common problem with the original spring which would cause extra wear on the Shaft).
The new Valve Spring is a high-quality unit made of stainless steel for corrosion resistance in moisture-rich CO2 as well as being flat ground (again, for better kink resistance). SOLD OUT, working on a Gen 2 kit...

- The Stainless Steel Screw Kit does not replace all the Vector's screws (depending on the model there are about 41 of them in total!) but instead replaces those that are most subject to corrosive forces. Specifically, all the hardware on the Barrel/Front Barrel Mount and Bolt Slider since both parts are usually washed with water at the end of the day when cleaning up broken paint, etc. Also comes with a spare Ball Detent. $10

- The Push-Button Safety Switch Kit (PBS) is an original Air Power unit that replaces the factory Safety. To clear a jam simply depress the PBS using either your trigger finger or by ‘slapping’ the switch with the palm of your hand (recommended, as this will also agitate the paint hopper). The PBS can be locked on safe by depressing it and then rotating clockwise. A very cool, very rare accessory and these are the last of them. Brand new. $10

With each shipment I'll also throw in a CD containing all the info I have available on the Vector (Owner's Manuals, Trouble Shooting Guide, pics, prints, tech info, etc.) This data alone is worth a mint!

Priority Postal shipping is $6.00 total to anywhere in the lower 48 states for any number of kits (AK, HI, and international will have to be quoted.) Paypal is preferred but I will take Money Orders if necessary. Please email all orders to classicpaintball@hotmail.com.

http://i230.photobucket.com/albums/e...an/Pics009.jpg

I also have a limited number of other Vector spare parts available. Some parts have special options/features or are in extremely low supply and will need to be quoted on a case by case basis. Let me know if you are looking for something in particular.

chopper duke 03-20-2010 10:49 PM

I'm interested for sure depending on price.

mustangii 03-20-2010 11:06 PM

Put me down for a few of them, now that I own 2 of them.
thanks
edm

John Satclaire 03-21-2010 01:48 AM

Yes yes yes yes!

Assuming somewhere in the ballpark of prices last time these were for sale, I'm willing to commit to 5 parts kits. I need to look and see about the spring/seal kits... probably another 3 of those though.

hmudd13 03-21-2010 03:55 AM

I'd be game for one or two, DOP.
Gotta say, my Vector is fun to play with. (and scary to some)
Nothing like a Vector/Intimidator/Liquid Co2 combo on a cold day.:rolleyes:

Titus 03-21-2010 05:09 AM

Go figure, once mine is sold do these come up for sale.

MrBig 03-21-2010 10:40 AM

Depending on price, I would be interested in one.

Drum 03-21-2010 11:02 AM

Howdy Justin!

mustangii 03-21-2010 11:03 AM

Quote:

Originally Posted by Titus (Post 1224537)
Go figure, once mine is sold do these come up for sale.


Thanks titus:ROTFL::old:

edm

Lrrpie-CT 03-21-2010 01:26 PM

Yes. I need the parts to rebuild/repair the 4-way desperately. Particularly, the little black, square, plastic cap that goes on the end of the 4-way. I'd machine one out of metail if I had the: parts, skill and machinery. :rolleyes:


All times are GMT -4. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC