P68 Boltaction & Double Barrel Custom made

1337pb · 10-17-2011, 04:20 PM

First up is a P68 PA Series set into a stock. Bolt Action mod, constant air, works great.
$150 obo

S-4 Sold

Only looking to sell these, paypal only please

Price Drop

Long Beard · 10-17-2011, 04:33 PM

I could be wrong, but I think your double barrel is actually a Chinese made S-4. They were VM knock offs and pretty bad knock offs at that. If you search MCB you can see what they have previously sold for. Good luck.

Teimusan · 10-17-2011, 04:34 PM

That is the Punisher p68 boltaction. NICE...

Iconic Muffinman · 10-18-2011, 10:55 AM

Long Beard is right, thats deffinately an S-4.

They normally are made of rather soft alumiminum, and do not have a pin depressor in the ASA. You mush use a remote, or an older on/off tank valve. Most functional problems are caused by the MASSIVE hammer, which simply weighs too much for the gun to cycle properly. Try using straight liquid CO2, lightening the hammer, or and HPA tank with a HIGH pressure output (1200+ PSI).

A good teardown and review can be found here:
Have Blue reviews the Qian Wei S-4

I know at least 2 people have actually made these cycle correctly, but it takes a good deal of work. Great wall-hanger or conversation peice though.

Hope this helps. Good luck on the sale!

1337pb · 10-19-2011, 11:58 AM

Thanks for the info. This one actually fire's half decently using a tank with on/off.. Haven't had any bits, so throwing them up on ebay.

SockMonkey · 10-19-2011, 01:40 PM

Just saying because you havent gotten any bites. The first one is a P68SC that was put into a random stock (not a correct sheridan stock). Also looks like that trigger group is held in by a allen screw. Over all its a bit rough and was side tapped for CA. I think over all these things make it less desirable compared to a nicely done kp conversion, which would probably sell for the $350 asking price.

I think 200-250 obo would be more reasonable.

Good Luck with the sale!

1337pb · 11-14-2011, 12:26 PM

price drop

SockMonkey · 11-14-2011, 02:11 PM

didn't this sell on eBay? (either way free up!)

longstar550 · 11-17-2011, 04:52 PM

if its still up for sale my friend wants it message me

10-17-2011, 04:20 PM	#1 (permalink)
1337pb Rec Poster Join Date: Apr 2009	P68 Boltaction & Double Barrel Custom made First up is a P68 PA Series set into a stock. Bolt Action mod, constant air, works great. $150 obo S-4 Sold Only looking to sell these, paypal only please Price Drop Last edited by 1337pb; 11-14-2011 at 12:26 PM.

10-17-2011, 04:33 PM	#2 (permalink)
Long Beard MCB Fantasy Hockey Champ Join Date: Feb 2007 Location: Northwestern PA	I could be wrong, but I think your double barrel is actually a Chinese made S-4. They were VM knock offs and pretty bad knock offs at that. If you search MCB you can see what they have previously sold for. Good luck. __________________ "Nelsons are like plastic plants. They work well for their design, but there isn't any life in them. " -BretG Palmers Houndstooth For Sale My MCB Feedback

10-18-2011, 10:55 AM	#4 (permalink)
Iconic Muffinman Weapons Design Enthusiast Join Date: Oct 2008 Location: Middletown, PA	Long Beard is right, thats deffinately an S-4. They normally are made of rather soft alumiminum, and do not have a pin depressor in the ASA. You mush use a remote, or an older on/off tank valve. Most functional problems are caused by the MASSIVE hammer, which simply weighs too much for the gun to cycle properly. Try using straight liquid CO2, lightening the hammer, or and HPA tank with a HIGH pressure output (1200+ PSI). A good teardown and review can be found here: Have Blue reviews the Qian Wei S-4 I know at least 2 people have actually made these cycle correctly, but it takes a good deal of work. Great wall-hanger or conversation peice though. Hope this helps. Good luck on the sale! __________________ My feedback! http://www.mcarterbrown.com/forums/f...-feedback.html Palmerized PG for sale! http://www.mcarterbrown.com/forums/r...d-pg-fs-t.html Gearbag Sale! http://www.mcarterbrown.com/forums/m...ml#post2222687

11-17-2011, 04:52 PM	#9 (permalink)
longstar550 Active Member Join Date: Aug 2010 Location: BC canada	if its still up for sale my friend wants it message me __________________ pmr parts http://www.mcarterbrown.com/forums/m...pmr-parts.html feedback http://www.mcarterbrown.com/forums/f...ml#post1737253

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-17-2011, 04:34 PM	#3 (permalink)
Teimusan MCB Member Join Date: Apr 2006	That is the Punisher p68 boltaction. NICE...

10-19-2011, 11:58 AM	#5 (permalink)
1337pb Rec Poster Join Date: Apr 2009	Thanks for the info. This one actually fire's half decently using a tank with on/off.. Haven't had any bits, so throwing them up on ebay.

10-19-2011, 01:40 PM	#6 (permalink)
SockMonkey Active Member Join Date: Apr 2010	Just saying because you havent gotten any bites. The first one is a P68SC that was put into a random stock (not a correct sheridan stock). Also looks like that trigger group is held in by a allen screw. Over all its a bit rough and was side tapped for CA. I think over all these things make it less desirable compared to a nicely done kp conversion, which would probably sell for the $350 asking price. I think 200-250 obo would be more reasonable. Good Luck with the sale!

11-14-2011, 12:26 PM	#7 (permalink)
1337pb Rec Poster Join Date: Apr 2009	price drop

11-14-2011, 02:11 PM	#8 (permalink)
SockMonkey Active Member Join Date: Apr 2010	didn't this sell on eBay? (either way free up!)