|
             |
 |
|
| Rare, Old Guns This is a catch all sale forum for pump, double action, or semi auto's built prior to 1995 Old Parts for these guns are also welcome here |
 |
| | LinkBack | Thread Tools | Search this Thread |
10-21-2011, 10:22 AM
| #1 (permalink) |
| Tempus fugit.  Join Date: Dec 2006 Location: Canada's National Capital | PMI-3 in very good condition w/huge accessory lot
Posted for "Canuck", here's a rare one: PMI-3, precursor to the "VM-68" but far less common. Vintage Rex data here: http://www.vintagerex.com/museum/PMI...n/PMI-III.html Contact Canuck via PM here: http://www.mcarterbrown.com/forums/p...o=newpm&u=9095 Comes with:
Only issue apparent: missing small part that holds "magic fingers" in place on feed neck. Last time we had this out, I recall it was shooting +/-2fps over the chrono and beastly accurate. $89 + shipping takes it all   Fitting stable-mate to your KP's!  Last edited by CJOttawa; 10-21-2011 at 10:26 AM. |
|  |
|
10-25-2011, 10:38 PM
| #3 (permalink) | |
| MCB Member  Join Date: Mar 2009 Location: Ottawa, ON |
Bump
__________________ Unfortunately "want" and "need" are two very different things... Canuck (formerly PMI 3) Quote:
| |
|
| |
|
11-06-2011, 12:08 AM
| #4 (permalink) | |
| MCB Member Join Date: Mar 2009 Location: Ottawa, ON |
To the top.
__________________ Unfortunately "want" and "need" are two very different things... Canuck (formerly PMI 3) Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
