mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Rare, Old Guns (http://www.mcarterbrown.com/forums/rare-old-guns/)
-   -   Nelspot looking for love + Build Your Own/Lapco internals. (http://www.mcarterbrown.com/forums/rare-old-guns/210092-nelspot-looking-love-build-your-own-lapco-internals.html)

Barsse 08-05-2012 12:05 PM

Nelspot looking for love + Build Your Own/Lapco internals.
 
Hi, everyone,

1) Nelspot that needs some TLC. Be nice to it and make it yours. This nelspot doesn't have the bottom body slot cut all the way through to the end, so the hammer pin needs to be put in once internals are inside, so it could be one of the "older" models. Or you can cut the 2 mm to make internals slide out. Powertube is wider than I saw on others, could be #6. Have not tested it for leaks, but all parts and seals appear to be there. $100 + Shipping.

http://www.freewebs.com/idph/2012-08...-56-46_470.jpg

2) Build your own Nelspot/Steel Challenger. Started out as a project, but never got to it. You get all the hardware, including OEM barrel extender, Assault Line barrel extender, great condition challenger 12g drop-out, Rear bottle ASA, metal pump handle, brass elbow that works great as a cram'n'jam for 10-round tubes! (that was my plan). Barrel tip is perfect length to bore and make it FREAK compatible for a great sleeper marker. Or, you can cut down the body and thread it for cocker barrels. Literally, build whatever you want with it! Comes with what's in the picture. $140 + Shipping.

http://www.freewebs.com/idph/2012-08...-03-46_460.jpg

3) New, unused from ASP: Lapco #6 powertube + phantom cupseal, and fluted Lapco hammer + bolt. I don't think they need introduction... :) SOLD

Hawkeye20 08-07-2012 11:43 AM

I'm not overly familiar with Nelspots...

On #2, is everything needed for a working gun there? In other words, if I got #2 and put everything together, would I have a functioning marker?

Automatic Thrill 08-07-2012 01:01 PM

Quote:

Originally Posted by Hawkeye20 (Post 2436161)
I'm not overly familiar with Nelspots...

On #2, is everything needed for a working gun there? In other words, if I got #2 and put everything together, would I have a functioning marker?

Looks like if you buy #2 you'll need #3 to make it work. Plus a hammer spring.

D_sensitized 08-07-2012 09:41 PM

PM incoming on #3

Barsse 08-11-2012 11:16 AM

Bump.

Barsse 08-20-2012 03:18 PM

Bump.

john137bonn 08-27-2012 09:38 PM

Did you sale the last nelson also?

Barsse 08-28-2012 04:17 PM

Both Nelsons are still available.

Barsse 10-22-2012 06:16 PM

Bump. Might have to let it go to ebay soon, but rather keep it here.


All times are GMT -4. The time now is 02:30 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC