mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Rare, Old Guns (http://www.mcarterbrown.com/forums/rare-old-guns/)
-   -   Classic modified Sheridan (http://www.mcarterbrown.com/forums/rare-old-guns/223295-classic-modified-sheridan.html)

weekendballer 01-11-2013 11:16 PM

Classic modified Sheridan
 
http://i158.photobucket.com/albums/t...psacc9a09b.jpg


Valve body is side tapped for constant Air hookup but the fitting on the end is setup for a thermo tank. Speed gate on the upper tube, and extended co2 plug. The Crossmann stock had the holes crudely re-drilled to fit on the Sheridan frame. The gun is a real time piece I haven't run air through it because of the thermo valve setup so i am unsure of the working condition.

$125 OBO shipping not included. I can include a thermo tanks if somebody wants to keep this original you just cove the extra shipping cost.

UPDATE 1/23/13
Ok so i got home yesterday and I went to check out the gun and how the fitting was mounted. The old fitting was soldered on and was not 1/8 inch npt like I thought. So I ended up pulling that fitting off. Tapping the body (1 thread) for 1/8 npt And then I threaded and soldered a new elbow on. I plugged it for now but you could run an airline from it if you wanted to. Since I had the entire gun apart I replaced all of the valve seals including the 12 gram face seal. I resurfaced the cup seal and then threw the whole thing back together. I noticed the the back cap has a rear velocity adjusted tapped into it as well. Also the nutsert the front grip screws into was starting to come loose (spinning when i put the screw into it) since i don't have any more of those lying around i just put a little solder around that as well. So here's what it looks like now since i had to do a little sanding to get it ready for the hot work.

http://i158.photobucket.com/albums/t...r/IMAG0054.jpg
http://i158.photobucket.com/albums/t...r/IMAG0058.jpg

Really the only thing left to do to make it a complete overhaul is to address the finish on the body to your liking paint, patina, polish, ect.

weekendballer 01-13-2013 07:40 PM

bump

Pdubs 01-14-2013 09:56 AM

run air through it and I might offer up.

Bored383 01-14-2013 10:47 AM

that is a nice, clean Pursuit Pistol.

they can run off of constant air or 12gr - gives some options for airing it up

weekendballer 01-15-2013 02:56 PM

It holds air if i throw in a 12 gram but since its filling up the airline as well i cant give and accurate velocity or shot count.

weekendballer 01-16-2013 12:58 PM

Bump

weekendballer 01-22-2013 10:33 AM

Bump

weekendballer 01-23-2013 04:33 PM

updated pics


All times are GMT -4. The time now is 12:10 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC