Pneumatic Designs Storm

Allfat · 04-09-2008, 02:24 AM

For Sale:

Pneumatic Designs Storm

As you can see in the pictures, it is in very good condition. All the stickers are intact and pretty much undamaged. It has a stainless steel line setup with a quick disconnect. There are a few scratches here and there, but it is almost flawless. I just chronoed the gun in my basement and it is shooting right around 300 +- 10 fps. First few shots were 298, 305, 307, 300, 296, 299. This was using unregged CO2, so the spring could probably be cut a little to get it down around 285-290ish. The serial number is #2966.

For those of you who are not familiar with this gun, it is extremely easy to strip the bolt and hammer out of the marker. All you have to do is take out a plug on the back of the top tube, and then the entire frame swings down using the front mount as a hinge. Then it is only a piece of wire that holds the spring guide in the bottom tube. Take it out, and the whole assembly can slide right out. It is a very cool design and very unique.

This gun is also completely ambidextrous. The air line, the cocking knob, and even the feedneck can be switched to be on either side of the gun. This makes it very configurable to however you like to play. If you like hopper left, then it is just a matter of taking out a couple of screws and swapping the feedneck to the left side.

Price: $90 obo shipped via USPS priority mail unless buyer pays for other shipping method.
I will take Paypal only. Paypal fees are included in pricing.

I may be interested in trades, but cash will take priority. As far as trades go, offer up and I will consider all offers.

You can contact me via PM. First person to post "PM'd with offer" - and is serious about it - gets first “dibs."

Thank you for looking at my stuff!

CamoDeafie · 04-09-2008, 03:14 AM

nice! wis i got $$ for it

free up for a fellow teammate of blacksheep!

Captainneeda · 04-09-2008, 10:23 AM

Paging MassDestruction00... MassDestruction00 to the rare guns forum, isle 12...

Allfat · 04-11-2008, 01:06 PM

Allfat · 04-15-2008, 09:01 PM

price lowered to $90 shipped obo.

Allfat · 04-20-2008, 02:02 PM

Allfat · 04-21-2008, 06:03 PM

foughtwolf · 04-21-2008, 06:20 PM

This built off of VM chassis or old spyder?

CamoDeafie · 04-21-2008, 07:16 PM

it is on its own, not compatible with VM or Spyders? similar to it but in diff parts (think F4 lol)

Allfat · 04-22-2008, 05:31 PM

I am not sure if it is compatible with spyders or VM's. I do not have either of those to test.

04-09-2008, 02:24 AM	#1 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	Pneumatic Designs Storm For Sale: Pneumatic Designs Storm As you can see in the pictures, it is in very good condition. All the stickers are intact and pretty much undamaged. It has a stainless steel line setup with a quick disconnect. There are a few scratches here and there, but it is almost flawless. I just chronoed the gun in my basement and it is shooting right around 300 +- 10 fps. First few shots were 298, 305, 307, 300, 296, 299. This was using unregged CO2, so the spring could probably be cut a little to get it down around 285-290ish. The serial number is #2966. For those of you who are not familiar with this gun, it is extremely easy to strip the bolt and hammer out of the marker. All you have to do is take out a plug on the back of the top tube, and then the entire frame swings down using the front mount as a hinge. Then it is only a piece of wire that holds the spring guide in the bottom tube. Take it out, and the whole assembly can slide right out. It is a very cool design and very unique. This gun is also completely ambidextrous. The air line, the cocking knob, and even the feedneck can be switched to be on either side of the gun. This makes it very configurable to however you like to play. If you like hopper left, then it is just a matter of taking out a couple of screws and swapping the feedneck to the left side. Price: $90 obo shipped via USPS priority mail unless buyer pays for other shipping method. I will take Paypal only. Paypal fees are included in pricing. I may be interested in trades, but cash will take priority. As far as trades go, offer up and I will consider all offers. You can contact me via PM. First person to post "PM'd with offer" - and is serious about it - gets first “dibs." Thank you for looking at my stuff! __________________ Probability is a math law, not an aiming technique. Last edited by Allfat; 04-15-2008 at 09:01 PM.

04-09-2008, 03:14 AM	#2 (permalink)
CamoDeafie nelson fanboy Join Date: Feb 2007 Location: Monmouth, Oregon Posts: 1,328	nice! wis i got $$ for it free up for a fellow teammate of blacksheep! __________________ nothing like the heft of steel nelspots

04-11-2008, 01:06 PM	#4 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	ttt __________________ Probability is a math law, not an aiming technique.

04-15-2008, 09:01 PM	#5 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	price lowered to $90 shipped obo. __________________ Probability is a math law, not an aiming technique.

04-20-2008, 02:02 PM	#6 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	ttt __________________ Probability is a math law, not an aiming technique.

04-09-2008, 10:23 AM	#3 (permalink)
Captainneeda MCB Member Join Date: Dec 2006 Posts: 175	Paging MassDestruction00... MassDestruction00 to the rare guns forum, isle 12...

04-21-2008, 06:03 PM	#7 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	ttt __________________ Probability is a math law, not an aiming technique.

04-21-2008, 06:20 PM	#8 (permalink)
foughtwolf Seasoned Member Join Date: Apr 2007 Posts: 750	This built off of VM chassis or old spyder? __________________ Be it fortress, army or the twisted zealots of Chaos, we shall overcome: We are Imperial Guard. For the Imperium of Mankind and those He protects. http://www.mcarterbrown.com/forums/f...tml#post249576 Created by Shade.

04-21-2008, 07:16 PM	#9 (permalink)
CamoDeafie nelson fanboy Join Date: Feb 2007 Location: Monmouth, Oregon Posts: 1,328	it is on its own, not compatible with VM or Spyders? similar to it but in diff parts (think F4 lol) __________________ nothing like the heft of steel nelspots

04-22-2008, 05:31 PM	#10 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR Posts: 465	I am not sure if it is compatible with spyders or VM's. I do not have either of those to test. __________________ Probability is a math law, not an aiming technique.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search