Cooper-T Imp Kits

pbmaniac2002 · 05-16-2008, 12:21 AM

I have three Cooper-T Imp kits for Sheridans. This allows you to convert a Sheridan pump into a semi. I have seen a few of these conversions and they are interesting to say the least.

The kit uses the original trigger frame, but the original bolt is replaced with the delrin bolt supplied with the kit. The brass insert with the valve on it and the hammer replace the original hammer and valve. The original valve stem is still used The kit with the white bolt uses the brass sleeve with a hammer, but retains the original valve and valve stem.

All three kits work best with a Sheridan originally set-up with a BB adapter. Since these are already side tapped it makes it a little easier to adapt the Cooper-T kit. You can also modify other Sheridans with a little more work.

Asking $85/ea shipped.

Here are some pics: Top Two Kits SOLD

I accept Paypal or money orders. Paypal addy is pbmaniac@sbcglobal.net.

Let me know if you have any questions by sending me a PM.

Thanks for looking.

infamoussmiley · 05-16-2008, 01:29 PM

do you have the valve tool to put the valve sleeves in the body and take them out?

pbmaniac2002 · 05-16-2008, 03:48 PM

I do not have a valve tool specific to the IMP kit. The outside octagon shape stays outside of the body, so you could use a adjustable wrench to turn it until it is loose enough to slide out. I do have a Sheridan valve tool for the stock Sheridan valves though.

shadowp68 · 05-16-2008, 09:12 PM

pm sent

vdrum4250 · 05-16-2008, 11:44 PM

do you have this kit on a sheridan so i can see what it would look like

pbmaniac2002 · 05-17-2008, 12:20 AM

Quote:

Originally Posted by vdrum4250

do you have this kit on a sheridan so i can see what it would look like

I don't have one mounted but the PGP Owner's Group had this pic in their gallery: imp

Since it's mounted on a PGP the bolt is exposed. On other Sheridans the bolt is mainly in the tube.

Hope that helps.

pbmaniac2002 · 05-17-2008, 12:21 AM

Quote:

Originally Posted by shadowp68

pm sent

Replied.

chplnstone · 05-18-2008, 11:39 PM

damnit, i had a pair of these before, but sold them...pm'ed

pbmaniac2002 · 05-19-2008, 12:45 AM

Only one kit is left (bottom kit w/white bolt).

pbmaniac2002 · 05-31-2008, 12:19 AM

Any takers on the last kit?

05-16-2008, 12:21 AM	#1 (permalink)
pbmaniac2002 MCB Member Join Date: Sep 2007 Location: SoCal Posts: 263	Cooper-T Imp Kits I have three Cooper-T Imp kits for Sheridans. This allows you to convert a Sheridan pump into a semi. I have seen a few of these conversions and they are interesting to say the least. The kit uses the original trigger frame, but the original bolt is replaced with the delrin bolt supplied with the kit. The brass insert with the valve on it and the hammer replace the original hammer and valve. The original valve stem is still used The kit with the white bolt uses the brass sleeve with a hammer, but retains the original valve and valve stem. All three kits work best with a Sheridan originally set-up with a BB adapter. Since these are already side tapped it makes it a little easier to adapt the Cooper-T kit. You can also modify other Sheridans with a little more work. Asking $85/ea shipped. Here are some pics: Top Two Kits SOLD I accept Paypal or money orders. Paypal addy is pbmaniac@sbcglobal.net. Let me know if you have any questions by sending me a PM. Thanks for looking. __________________ MCB Feedback Ebay Feedback Last edited by pbmaniac2002; 05-19-2008 at 12:44 AM.

05-16-2008, 03:48 PM	#3 (permalink)
pbmaniac2002 MCB Member Join Date: Sep 2007 Location: SoCal Posts: 263	I do not have a valve tool specific to the IMP kit. The outside octagon shape stays outside of the body, so you could use a adjustable wrench to turn it until it is loose enough to slide out. I do have a Sheridan valve tool for the stock Sheridan valves though. __________________ MCB Feedback Ebay Feedback

05-16-2008, 11:44 PM	#5 (permalink)
vdrum4250 MCB Member Join Date: Mar 2008 Location: Irvine, CA Posts: 124	do you have this kit on a sheridan so i can see what it would look like __________________ FEED BACK LINK: http://www.mcarterbrown.com/forums/f...-feedback.html

05-18-2008, 11:39 PM	#8 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 883	damnit, i had a pair of these before, but sold them...pm'ed __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

05-19-2008, 12:45 AM	#9 (permalink)
pbmaniac2002 MCB Member Join Date: Sep 2007 Location: SoCal Posts: 263	Only one kit is left (bottom kit w/white bolt). __________________ MCB Feedback Ebay Feedback

05-16-2008, 01:29 PM	#2 (permalink)
infamoussmiley Seasoned Member Join Date: May 2006 Posts: 512	do you have the valve tool to put the valve sleeves in the body and take them out?

05-16-2008, 09:12 PM	#4 (permalink)
shadowp68 MCB Member Join Date: Feb 2007 Posts: 59	pm sent

05-31-2008, 12:19 AM	#10 (permalink)
pbmaniac2002 MCB Member Join Date: Sep 2007 Location: SoCal Posts: 263	Any takers on the last kit? __________________ MCB Feedback Ebay Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search