California Grey Ghost FS/FT High end snipers

BigOldSkool · 06-05-2008, 12:12 AM

First some back story then the eye candy..... My team mate and good friend George picked this up last spring castle from the local store down there that has since closed down.. Big Boys Toys. Jay (store owner) was the original owner, he bought it new from lapco right after he left the military. The gun was his main and favorite pump for years.. but he sold it off to my team mate knowing it would go to a good home. It has but as of late, real life, and lack of a paint that wont roll out of the barrel is pushing this poor gun back into the closet..... All the local fields are draxxus and with out a tight bore barrel the tiny paint just sucks.

That being said.. its by no means a wall sitter.. its been used alot over the years and it shows some normal wear... behind the pump and barrel tip and some dings here and there.

Other things include
- Line SI power tube assembly for some reason. but the lapco bolt and hammer are still there
- Missing the front grip frame screw.. it has a screw and washer
- Missing the original valve lock down screws.. it has taso's
- Pump arm screw may be orginial its some high poilshed SS hex shaped thing
- Spring return spring is there
- No sight rail
- Wood grips
- Grip frame does not have the "wintec" markings
- Cali stock with tank and SP on off valve included
- Macroline.. I know.. bad... but the original grease line was chewed by my freinds puppy..
- Elbow included
- Pump may have the wrong sided pump arm on it.. I can tell I never seen another older ghost in person.. it has the cut out on the bottom for the feed port that would normally face up.

Price
- $400.. I have yet to see another cali ghost up in a while

Trades
- High end modern snipers... CCMs, Custom builds, or alike.
- Offer up.. but Ill have to ask him first... Only really looking for pumps that arent nelson based.

c6quad · 06-05-2008, 01:09 AM

the Cali Ghost is one of the most beautiful guns there are. nice!!!

flyweightnate · 06-08-2008, 08:23 PM

Wow, that's nice...

I'll shoot a PM over, but it might be a shot in the dark.

stimpy · 06-09-2008, 12:55 AM

would you part the stock and tank ring?

BigOldSkool · 06-09-2008, 02:36 AM

Quote:

Originally Posted by stimpy

would you part the stock and tank ring?

Yeah sure for $400 and it comes with a free Ghost...

Why on earth would a part out a critical part to a historic gun?

stimpy · 06-09-2008, 09:05 PM

just asking, no worries

CamoDeafie · 06-09-2008, 10:15 PM

hmm you dont happen to want my car eh?

lol. (its a 140K mile GP 4 door with no rust) free up for a smexy Lapco!

BigOldSkool · 06-10-2008, 03:50 PM

Nah my team mate needs a sniper by the end of this month for the Buffalo gig..

I may also be willing to work out a deal for a new 2k+ ccm kit with frame and auto trigger and some cash involved as well.. I have a body I can give him.

BigOldSkool · 07-28-2008, 01:03 PM

Still looking for high end non stock bodied cockers or sniper...

I-Tech · 08-07-2008, 02:26 AM

why do u guys lay works of art on the ground like that. it's wrong wrong i tell u

06-05-2008, 12:12 AM	#1 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,868	California Grey Ghost FS/FT High end snipers First some back story then the eye candy..... My team mate and good friend George picked this up last spring castle from the local store down there that has since closed down.. Big Boys Toys. Jay (store owner) was the original owner, he bought it new from lapco right after he left the military. The gun was his main and favorite pump for years.. but he sold it off to my team mate knowing it would go to a good home. It has but as of late, real life, and lack of a paint that wont roll out of the barrel is pushing this poor gun back into the closet..... All the local fields are draxxus and with out a tight bore barrel the tiny paint just sucks. That being said.. its by no means a wall sitter.. its been used alot over the years and it shows some normal wear... behind the pump and barrel tip and some dings here and there. Other things include - Line SI power tube assembly for some reason. but the lapco bolt and hammer are still there - Missing the front grip frame screw.. it has a screw and washer - Missing the original valve lock down screws.. it has taso's - Pump arm screw may be orginial its some high poilshed SS hex shaped thing - Spring return spring is there - No sight rail - Wood grips - Grip frame does not have the "wintec" markings - Cali stock with tank and SP on off valve included - Macroline.. I know.. bad... but the original grease line was chewed by my freinds puppy.. - Elbow included - Pump may have the wrong sided pump arm on it.. I can tell I never seen another older ghost in person.. it has the cut out on the bottom for the feed port that would normally face up. Price - $400.. I have yet to see another cali ghost up in a while Trades - High end modern snipers... CCMs, Custom builds, or alike. - Offer up.. but Ill have to ask him first... Only really looking for pumps that arent nelson based. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

06-09-2008, 12:55 AM	#4 (permalink)
stimpy Vacation 9/12 to 9/26 Join Date: Jul 2007 Location: San Diego CA Posts: 462	would you part the stock and tank ring? __________________ FEEDBACK MCB evilbay

06-09-2008, 09:05 PM	#6 (permalink)
stimpy Vacation 9/12 to 9/26 Join Date: Jul 2007 Location: San Diego CA Posts: 462	just asking, no worries __________________ FEEDBACK MCB evilbay

06-09-2008, 10:15 PM	#7 (permalink)
CamoDeafie nelson fanboy Join Date: Feb 2007 Location: Monmouth, Oregon Posts: 1,448	hmm you dont happen to want my car eh? lol. (its a 140K mile GP 4 door with no rust) free up for a smexy Lapco! __________________ nothing like the heft of steel nelspots

06-10-2008, 03:50 PM	#8 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,868	Nah my team mate needs a sniper by the end of this month for the Buffalo gig.. I may also be willing to work out a deal for a new 2k+ ccm kit with frame and auto trigger and some cash involved as well.. I have a body I can give him. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

07-28-2008, 01:03 PM	#9 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,868	Still looking for high end non stock bodied cockers or sniper... __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

08-07-2008, 02:26 AM	#10 (permalink)
I-Tech Rec Poster Join Date: Feb 2007 Location: west haven,ct Posts: 42	why do u guys lay works of art on the ground like that. it's wrong wrong i tell u

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search