|
             |
 |
|
| Rare, Old Guns This is a catch all sale forum for pump, double action, or semi auto's built prior to 1995 Old Parts for these guns are also welcome here |
 |
| | LinkBack | Thread Tools | Search this Thread |
03-16-2009, 10:00 PM
| #1 (permalink) |
| MCB Member  Join Date: Mar 2006 Location: Nor Cal | Bacci's 2009 Gun Sale (300 guns, pump, semi, ect)...  Bacci’s 2009 Gun Sale of 300 guns These are guns that I have accumulated that I don’t need in my collection. I am interested in some trades which can be found at the bottom of this post and I can take money orders or paypal. Prices do not include shipping with in most cases for standard size guns will be 13 dollar shipped. Shipping will be through USPS priority unless you have a large order (or request it) then I will look into UPS. I will ship out of the country but you must pay via paypal and the order will be shipped via USPS. I only ship once a week usually on a Weds or a Friday. If you are interested in a gun you can post here, pm me, email me at baccipaintball@gmail.com. I have my phone on mcb pretty much all day but I am only on my computer for a few hours. I can answer some pms through my phone but if I need to access my computer then a response will most likely take longer. If you want additional pictures I will be happy to take some for you but it might take a few days and the same goes with chrono tests. I will parts guns or subtract parts from guns if you are interested in a significant portion, just pm me for a quote. Remember: ctrl+f is find (in Mozilla) and it can really help out with finding out whether or not a I have a specific part listed.* Also consult the table of contents below There are 300 guns in this sale and they are listed in the following order: Nelson Based 1-5 Nelson 6-17 AGS/Taso 18-27 Trracers and ect 28-37 Line SI 38-41 Lapco 42-49 Carters 50-54 CCI 55-57 NW 58-65 WGP 66-76 Misc nelsons Sheridan Based (not including WGP) 74-89 PGP 90-91 Pursuit Pistols (stock class and direct feed) 92-100 PMI 1 (stock class and direct feed) 101-104 Mac-1 modified PMI1 avengers 105-112 Misc sheridans 113-116 Misc aftermarket sheridans (Mac, Russel, Cal Ord and Cooper-T) NSG 117-128 Splatmasters 129-140 Rapides 141-152 Gzs Brass Eagle Guns 153-163 Classics (Nightmares, cobras, semis, ect…) 164-170 Plastic Tippmanns 171-176 Smg-60s 177-181 68 Specials 182-189 Misc Tippmanns Stack Tube Blowbacks 190-194 Sheridan= VMs 195-198 Fastech/aci= F2s, Griffins and AFT 199-212 Kingman and some misc 213-216 Action Markers 217-227 Misc, Vipers, Blades, ect ICD 228-234 Misc Misc Semis (and other inline blowbacks) 235-239 Epics, Montneels, and Z clones AGD 240-260 Automags, E-mags and ect Perentie 261-264 Badgers Southern Pneumatics 265-269 Phoenixs and Clones (Equalizer) Air Power 270-273 Vectors and Apex Sovereigns, Palmers, Snipers/Cockers and other WGP nelsons 274-276 Sovereigns 277-278 Palmers 279-290 Snipers/Cockers 291-296 Autotrracer and kits More misc semis 297-300 Nova, Sidekick, and shockers I have additional after market and stock parts for many of these guns so please pm me if you would like a certain parts along with a gun just ask. I also have regs, tanks, hoppers, masks, packs ect just ask. At the beginning of each section of guns I will list a few of the parts you can inquire about. I can include tanks and elbows for the following prices. All tanks are out of hydro but here is what I have: 7oz standard valve -6 7oz thermal -12 10oz standard -16 10oz thermal-20 12-3 20-3 Butt plates for any-1 dollar Elbows on any gun except for vms and Tippmanns or centerfeeds for 1-2 Vm-2, Tippmann-ask, Centerfeed-ask Nelsons: Parts available, aftermarket powertubes, battle grips. http://www.mcarterbrown.com/gallery/...058/R_1_01.jpg Additional pics: 2 1. Rust bucket junk project nelson 007 -Sold Looking for 46. Sold (8-09) http://www.mcarterbrown.com/gallery/...058/R_2_01.jpg Additional pics: 2 2. Rust Bucket junk project nelson 007 -Sold Looking for 56. Sold (8-09) http://www.mcarterbrown.com/gallery/...058/R_3_01.jpg Additional pics: 2 3. Nelson 007 Sold Looking for 73. Sold (8-09) http://www.mcarterbrown.com/gallery/...058/R_4_01.jpg Additional pics: 2 4. Nice Nelson 007 Sold Looking for 105. Sold (3-21-09) http://www.mcarterbrown.com/gallery/...058/R_5_01.jpg Additional pics: 2 5. Nelson challenger Looking for 36. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...058/R_6_01.jpg Additional pics: 2 6. Junk Taso Devastator #1 Sold Looking for 32. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...058/R_7_01.jpg Additional pics: 2 7. Junk Taso Devastator #2 Sold Looking for 32. Sold  Additional pics: 2 8. Taso Devastator Junk #3 Black and darkish blue exrental. Has trigger spring. No grips. Has newer style pump. Asa paint or anno is almost all the way worn off. Has 20 engraved on body has is also missing the front screw that holds the grip frame to the rail. Untested and sold as is... Looking for 30.  Additional pics: 2 9. Junk Taso Devastator #4 Missing site rail and driver side grip and trigger spring.. Internals are a bucket of rust. ASA has paint or ano coming off. Has newer pump. Has 39 engraved on body. Untested and sold as is... Looking for 28.  Additional pics: 2 10. Junk Taso Devastator #5 Yellow ex rental Taso rust bucket. Internals are a solid brick. Has trigger spring and is missing one of the two site rail screws. Has 89 engraved on the side of the body. Body and pump arm match but asa is a lighter yellow. Untested and sold as is... Looking for 34. (pending)  Additional pics: 2 11. Junk Red Taso Devastator #6 Junky pile of rust but I aired it up and it shot. Grip frame has been painted red and rear screw hole on the grip frame is stripped and asa is held on with a nut. Has 32 engraved into the side. Missing safety. No leaks but still sold as is and is a pile of rust that is intended as a project gun. Looking for 40. Pending (3-17-09)  Additional pics: 2 12. Junk Taso Devastator #7 Body is dark blue and pump arm, site rail, and rear asa are light blue. Driver side grip is cracked and broken around screw. Well used and Internals are a bucket of rust. Body has number 58 engraved into the side. Has funky 12 gram screw on bottom of grip. Untested and sold as in. Looking for 33.  Additional pics: 2 13. Junk Taso Devastator #8 Green bodied ex rental devastator. Arm and body and sight rail match. Sight rail is missing the back screw. Has trigger return spring. Internals are all rusty just like the others. Missing safety and grips have a crack on the driver side. Body has 80 engraved on it on both sides. Untested and sold as is... Looking for 33. http://www.mcarterbrown.com/gallery/...58/R_14_01.jpg Additional pics: 2 14. Junk Taso Devastator #9 Sold as is and looking for 39. Sold  http://www.mcarterbrown.com/gallery/...58/R_15_01.jpg Additional pics: 2 15. AGS Team AGS Bloodsucker Looking for 85.Sold http://www.mcarterbrown.com/gallery/...58/R_16_01.jpg Additional pics: 2 16. 165. Taso Spartan Looking for 65. Sold http://www.mcarterbrown.com/gallery/...58/R_17_01.jpg Additional pics: 2 3 17. Taso stock gun. Looking for 180 Sold  Additional pics: 2 18. Early Trracer #1 Good exterior shape. Internally hammer and spring are corroded. Holds air and cycles great. Has older long powertube and bolt is non adjustable and no spring detent. Has spyder style grip. Looking for 43. Pending  Additional pics: 2 19. Late Trracer #2 Decent exterior shape. Internals look good and barrel looks good. Site rail has dings. Bolt is velocity adjustable and powertube is short style. Looking for 55. Pending http://www.mcarterbrown.com/gallery/...58/R_20_01.jpg Additional pics: 2 20. Late Trracer #3 Looking for 55 Sold (3-18-09) http://www.mcarterbrown.com/gallery/...58/R_21_01.jpg Additional pics: 2 21. Early Trracer #4 Looking for 45 sold (3-19-09) http://www.mcarterbrown.com/gallery/...58/R_22_01.jpg Additional pics: 2 22. Early Trracer Looking for 40. Sold  Additional pics: 2 23. Early Trracer #6 Good shape except barrel has minor scratches in it right after the pump and on the tip. Non adjustable bolt, and long powertube and lonestar stowaway 2 grip with door. Anno on Driver side of feed neck has a blem, color is a little lighter in around an 1/8-1/4 inch circle. Hammer has some light corrosion but is polished smooth. Cycles well with no leaks. Looking for 45. Pending http://www.mcarterbrown.com/gallery/...58/R_24_01.jpg Additional pics: 2 24. Late Trracer #7 Looking for 55 Sold  Additional pics: 2 25. Early Trracer #8 Polish on body wasn't very good pre anno. Feed neck and body on driver side of feedneck has some anno blem. Hammer has light corrosion but was polished smooth. Bolt is non adjustable. Has paintball on trigger and lonestar stowaway 2 grip is dirty. Cycles wells with no leaks. Looking for 43. Pending  Additional pics: 2 381. Late Model Trracer Has adjustable bolt and spring detent. Has seen use and has wear at back end of pump slots. Cycles well and shoots great. Looking for 50. Can add a Euro grip bottomline for 15 more. Sold http://www.mcarterbrown.com/gallery/...58/R_26_01.jpg Additional pics: 2 26. Trracer Tagmaster Great shape with some wear on the bolt but the rest of the gun is in excellent shape. Has under cocking, Short powertube, long hammer, velocity adjustable bolt, and Euro grip. Holds air and cycles well with no leaks. Looking for 75. Sold  Additional pics: 2 27. ACI Hornet Great shape except for scratch on the passenger side under the feed. Has undercocking, short powertube, long hammer, velocity adjustable bolt, and Euro grip. Cycles well and no leaks. Has some wear on undercocking slot and name on the side "Hornet" is wearing off. Looking For 68.     Line SI Bushmaster: Accessories available around Line SI stock powertubes, Line SI 12 gram changers  Additional pics: 2 3 28. Old bushmaster (not deluxe) body kit on nelson Used shape and barrel has been honed and then chunks of paint dried on the bare aluminum for 20 years. Has super old style aluminum and steel bolt (aluminum bolt and steel back). Nelson grip frame has holes for wire stock. Passenger side grip plastic grip has crack. Back bottle asa is in bad shape. Has allen set screws for side valve body screws and cycles well with no leaks. Has brass thumb screws and barrel isn't removable. Looking for 100 and I can add a wire stock for 30 but is has some rust.  Additional pics: 2 3 4 29. Old school Bushmaster Great shape Nelson framed Line SI Bushmaster. Has chipped up ambi grips with lots of cracks and chunks out of them. Has all large flate head screws on barrel screw plate and site rail. One Screw on barrel screw plate has a mared head. Has Air Power steel rear asa. Has light surface rust on asa. Internals are all line si, power tube is #2 SI and valve retaining screw is SI stainless. Has light pump wear around bushmaster engraving. Has stainless pump screws. Cycles great with no leaks. Looking for 125.  Additional pics: 2 3 30. Used Bushmaster Well used and battle scarred bushmaster deluxe. Has dings all over body but still cycles great with no leaks. Pump arm isn't original and is either late wintec or taso. Nonvelocity adjustable hammer, generic #4 powertube and stock nelson valve retainer screw. Barrel doesn"t have as much pump wear as the body does. Feedneck has some nasty scars on it and has nelson frame which missing paint. Looking for 90. http://www.mcarterbrown.com/gallery/...58/R_31_01.jpg Additional pics: 2 31. Line SI Pointman Bushmaster Looking for 155. Sold http://www.mcarterbrown.com/gallery/...58/R_32_01.jpg Additional pics: 2 32. Bushmaster (not deluxe) Parted Grip Frame  Additional pics: 2 3 33. Bushmaster dropout Polished old style bushmaster with old style flathead screws instead of allen screws with upgraded line si frame. Has brass pump arm screws, brass trigger shoe, m-16 grip, drop out and lapco style #4 power tube. Cycles well and shoots good with no leaks. 12 gram drop out isn't as nicely polished as body. Barrel looks great and I don't think it was ever anno'd. Hammer is velocity adjustable. Looking for 120 or 115 without the brass trigger shoe or I can add a partially polished 45 grip block for 10 more. (The block isn’t pretty but it does the job).  Additional pics: 2 34. Line SI Bushmaster Used shape. Has old style body with non removable barrel and new style pump. Has skorr trigger plate, Line si bushmaster bore drop plastic and stainless bolt, stock nelson hammer, lapco style (lapco but no LA stamp) powertube and nelson trigger frame. Cycles great with no leaks. Grips are crack free and pump stroke is ultra smooth. Pump arm screws don't have the SI logo on them. Not sure if it was ground off or just never on them. Looking for 90.  Additional pics: 2 3 4 5 6 7 8 9 10 11 12 13 35. Late Line SI Long Snub Bushmaster Good shape. Came to me with every screw rusted. I replaced all of them and cleaned it up. Interior of breech has a corrosion spot, has a ding on the sight,. Frame have a bunch of scratches, SI pump arm Screws, and SI internals and lapco 4 powertube and seal. Adjustable SI hammer with plastic locking screw. The bottom driver side edge has an anodization flaw which is very hard to see from the picture, it looks like a reflection but it is basically a line across the bottom corner and wear along the top edge. There is wear on the sides of the grip frame and the front two corners. There is also wear or a scratch on the bottom of the back screw hole. The direct feed does have a dent on the passenger side. It looks as though someone dropped it on this corner at one time because it is dented in that way. The outer edge of the front of the barrel also has dings and scraps. The body looks decent though besides the dent on the passenger side of the feedneck as stated and one small line of pump wear which is minimal. Cycles great with no leaks. Looking for 115 or 105 without lapco tube.  Additional pics: 2 3 4 5 6 36. Red bodied Bushmaster with snub body Good shape bushmaster with fixed barrel, not deluxe model. Body was re anodized red by Gabriel Tyler. Has line SI powertube number 4, has SI valve retaining screw and SI pump arm screws, pump is SI also but un marked (Has front sight ridge). Has brass trigger shoe. Cycles great with no leaks. Looking for 165 or 160 without trigger shoe. - pending (2-26-10) http://www.mcarterbrown.com/gallery/...58/R_37_01.jpg Additional pics: 2 37. 45 frame Bushmaster in great shape Looking for 165 Sold (3-20-09)  http://www.mcarterbrown.com/gallery/...58/R_38_01.jpg Additional pics: 2 3 4 5 38. Lapco Grey Ghost Looking for 270. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...58/R_39_01.jpg Additional pics: 2 3 4 5 6 7 8 9 10 11 12 39. Lapco Grey Spirit #2 Looking for 270. Sold (3-17-09) [url]http://www.mcarterbrown.com/gallery/data/1058/R_40_01.jpg[url] Additional pics: 2 3 4 5 40. Well used Lapco Grey Spirit. Looking for 220. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...58/R_41_01.jpg Additional pics: 2 3 4 41. Lapco Specter Looking for 245. Sold (3-17-09) Paintgun Outlaws I can add a drop out changer along with stock 12 gram drop out brass screw to any one for 15 more or replace the rear asa with that set up for 5 more. The difference between the back asa brass screw and the back drop out screw is that the back drop out screw goes through the grip frame and threads into the drop out as opposed to through the asa threading into the grip frame.  Additional pics: 2 3 4 316. Outlaw II Great shape, non removable extra long barrel. Has stainless lapco like internals. Bolt is non velocity adjustable. Has dropout changer and full quick strip screw set. Has minimal pump wear and size 2 powertube. Wintec frame is unmarked. Looking for 106  Additional pics: 2 3 4 4 4 4 357. Outlaw II Great shape. Has stainless lapco style internals with flutted long hammer and non adjustable bolt. Has size 4 powertube and all brass quickstrip screws. Overall good shape but small scraps on pump arms in two spots and pump wear and other minor wear on barrel. Looking for 110. I can replace the flutted hammer with a standard style full hammer and take off 10 from the price. http://www.mcarterbrown.com/gallery/...8/T_382_01.jpg Additional pics: 2 3 4 5 6 382. Outlaw II Looking for 86 Sold for 65 shippd  Additional pics: 2 3 4 358. Outlaw III Looking for 95 -Sold   Carter Tri-Cars. The first bunch of these Tri-Cars came from a somewhat local field in Northern California, Adventure Mountain. The field had two crates of these Tri-Cars, one which is now in the possession of Ralph Torrell(sp?) and the other which is in my basement. Can include stock Tri-car velocity adjusting rod allen rod for 13 with each Tri-Car. I can include a flag from AM with the AM Tri-Cars gun in either yellow or grey.  Additional pics: 2 42. Carter Tri-Car #1 Good shape ex rental. Has AM #3 lightly scratched into rail. Velocity adjustable bolt, pump spring, and skorr trigger plate. Has wear under pump, light wear on end of barrel, has corrosion in grip frame next to trigger pin and also below the trigger and blue anno on trigger frame isn't the brightest/ fadded. And some gunk still in barrel. Also has some wear on the feed neck. Has pump arm spring. Cycles well with no leaks. Looking for 160.  Additional pics: 2 3 4 5 6 43. Carter Tri-Car #2 Decent shape ex rental. Has AM #1 lightly scratched into rail. Velocity adjustable bolt, pump return spring, and skorr trigger plate. Has wear under pump, little corrosion in grip frame next to trigger. And some gunk still in barrel and a little wear on the feed. Has pump arm spring. Driver side grip panel has been attached. Cycles well with no leaks. Looking for 175. http://www.mcarterbrown.com/gallery/...58/R_44_01.jpg Additional pics: 2 3 4 44. TriCar #3 Looking for 172. Sold  Additional pics: 2 3 4 5 6 7 45. Carter Tri Car #4 Used Tri Car. Has pitting on trigger, corrosion on blue anno of frame, rust on pump arm screw and has ding on feed. End of barrel has dents on outer edge but not on inside and has scartch on site rail. Has Velocity adjustable bolt and return spring. Pump arm has ding on it. Has AM #2 scratched in grip frame rail. Has pump spring. I replaced power tube. Cycles fine with no leaks. Driver side grip has been re-glued. Looking for 150.  Additional pics: 2 3 4 5 46. Carter TriCar #5 Decent shape but body has a few corrosion spots around pump slot. Pump screw has wrench marks. Barrel and pump are in good shape. Has AM #4 scratched in grip frame rail and has velocity adjustable bolt as well as pump spring. Grip frame has corrosion in some spots. Sight rail screws have rust. Trigger has pitting. I replaced power tube. Cycles well with no leaks. Both grips have been reglued. Looking for 155. http://www.mcarterbrown.com/gallery/...58/R_47_01.jpg Additional pics: 2 47. Project Ex rental Tri Car # 6 Looking for 93. sold (3-18-09) http://www.mcarterbrown.com/gallery/...58/R_48_01.jpg Additional pics: 2 48. Project ex rental tri car #7 Looking for 88. sold (3-25-09) http://www.mcarterbrown.com/gallery/...58/R_49_01.jpg Additional pics: 2 3 4 5 6 7 49. Carter Comp stock class Looking for -Keeping http://www.mcarterbrown.com/gallery/...58/R_50_01.jpg Additional pics: 2 50. Left Feed Phantom Unibody #1 Very well used shape. Has scratches all over it but it cycles great and hold air with no leaks. Has old style 45 degree copper fitting for a stick feed. Missing front site and safety. Frame was tapped for vertical air after frame was anno'd. Not sure how a va would hold up though since holes look beat up. Serial is 12201. Back Bottle adapter has tons of scratches. Quick strip screws don"t match but hold gun together well. Has velocity adjustable allen bolt. Looking for 100. - Sold (8-09) http://www.mcarterbrown.com/gallery/...58/R_51_01.jpg Additional pics: 2 51. Phantom Right feed Unibody. #2 Looking for 105. Sold (4-4-09) http://www.mcarterbrown.com/gallery/...58/R_52_01.jpg Additional pics: 2 52. Grey polish anodized Right feed Phantom #3 Looking for 115. Sold http://www.mcarterbrown.com/gallery/...58/R_53_01.jpg Additional pics: 2 3 4 5 6 53. 168. CCI phantom stock class new style cci #4 Looking for 167. Sold (3-18-09) http://www.mcarterbrown.com/gallery/...58/R_54_01.jpg Additional pics: 2 54. Unibody Phantom #5 Looking for 135 with 12 gram changer or can include asa for 14 more or 130 with back bottle asa only. Sold (3-16-09)  Additional pics: 2 55. NW spitfire II Good shape. Has site pin on pump and notched from bolt as well as muzzle brake barrel. Has small dings in several spots. Bolt is velocity adjustable with an allen wrench. Holds air and cycles well. Looking for 60. http://www.mcarterbrown.com/gallery/...58/R_56_01.jpg Additional pics: 2 3 4 56. Stock Class Spitfire Looking for 200. Sold http://www.mcarterbrown.com/gallery/...58/R_57_01.jpg Additional pics: 2 57. NW Silver Bullet Looking for 163. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...58/R_58_01.jpg Additional pics: 2 58. Site Ranger #1 Sold  Additional pics: 2 59. Site ranger #2 Used shape site ranger, serial number 0136. Body has some light rust on it, pump arms also have some rust on them. Missing paint on body as well as grip frame. Missing pump arm screw and has allen screws instead, missing site rail. Cycles well with no leaks. Bolt isn't velocity adjustable, but I can add a velocity adjustable bolt set of internals for 10 (includes velocity adjustable bolt, hammer without sear and sear pin and spring.) Looking for 76.  Additional pics: 2 60. Site Ranger #3 Used shape site ranger. Has plated steel body but is missing some paint and has some rust, frame is missing some paint and other parts of the paint is flaking, barrel has sratches and. dings and scrapes. Misisng pump arm screws and has allen screws, missing site rail, and has raw backbottle adapter which doesn't have the recessed portion on top so it takes a button allen screw. Serial 0251. Cycles fine with no leaks. Has hybrid ranger powertube/cupseal/ valve retaining screw, and has non velocity adjustable bolt. Add a velocity adjustable bolt set of internals for 10 (includes velocity adjustable bolt, hammer without sear and sear pin and spring.) Looking for 73.  Additional pics: 2 61. Site ranger # 4 Used shape site ranger serial number 0194. Barrel has excessive wear, frame is missing lots of paint, body is plated but has some rust, pump arm screws and pump arm have rust. Has hybrid ranger valve train. Missing site rail, and bolt isn't velocity adjustable, but I can add a velocity adjustable bolt set of internals for 10 (includes velocity adjustable bolt, hammer without sear and sear pin and spring.) It was leaking so I flipped the seal in the valve retaining screw and now it seals great and cycles fine. Looking for 80.  Additional pics: 2 62. Site Ranger #5 Great shape Site ranger serial 0260. Has paint chip under bottom of trigger on frame and paint on passenger side of of grip frame above trigger has paint chip. Has pump arm screw, safety, site rail, hybrid ranger valve assembly, good shape barrel. Cycles well with no leaks. Bolt is not velocity adjustable, but I can add a velocity adjustable bolt set of internals for 10 (includes velocity adjustable bolt, hammer without sear and sear pin and spring.) Looking for 130.  Additional pics: 2 63. Ranger #6 Good shape Ranger, serial number 2622. Has a couple of chips in the paint, very light rust on the pump arm, pump screws, and pump has some scratches. Body is plated and then painted. Has stock hybrid ranger valve assembly, and flat head adjustable bolt. Cycles fine with no leaks. Looking for 125. Sold  Additional pics: 2 64. Ranger #7 Ranger in good shape, serial number 2610. Missing safety. Pump arms have rust in one spot, pump has small cracks around where pump arms thread in. Has ranger stock hybrid valve assembly, cycles well with no leaks, barrel is in good shape. Has site rail, pump arm screws, and flat head velocity adjustable bolt. Looking for 115. -Sold  Additional pics: 2 3 4 5 65. Ranger #8 Good shape ranger serial number 4337. Body is plated and then painted. Has stock hybrid valve assembly, site rail, pump arm screws, and safety. Pump has some scrapes and scratches but no cracks. Paint has a couple of chips on body, and sight rails has a few dings. Looking for 110. http://www.mcarterbrown.com/gallery/...58/R_66_01.jpg Additional pics: 2 66. Razorback II #1 Looking for 55 Sold (4-4-09)  Additional pics: 2 67. Razorback Classic #2 Used shape but body looks good. Has adjustable bolt and nice pump arm screws. Has lonestar stowaway #2 grip and cycles well with no leaks. Body and asa have 1/8 inch gap and asa looks isn't matched. It might be off a trracer but works fine. All metal. Looking for 55.  Additional pics: 2 68. Razorback/ Trracer / Blackwidow parts gun. Cycles well with no leaks. In very well used shape. Razorback pump arms are dremel polished. Pump handle look good. Trracer frame is well used. Has short powertube and long hamme and non velocity adjustable bolt from trracer. Body is from a black widow and asa is also from a trracer. Body and asa has 1/8-1/16 inch gap but gun functions fine Looking for 40.  Additional pics: 2 69. Parts Nelson Has kenimex blackhawk frame, black widow body, trracer internals, and tiger shark pump arm. Fires and Cycles with no leaks but needs a strong valve spring and maybe a lighter main spring. Looking for 35  Additional pics: 2 70. Well used Aerostar Assassinator 1 #1 Very old nelson clone. Not sure when this gun came out but probably one of first to offer removable barrels after bushmaster. Grip frame has holes for wire stock. Front grip frame screw is almost stripped. Finish on entire gun is in bad shape and has seen a lot of wear. Barrel is aluminum and painted black and outside is raw and inside is ano'd black, body is steel and painted black. Asa is anno'd black and nelson grip frame is stock finish. Frame has 40 carved on the rear under the asa and front near the front frame screw. Quick strip screw on the asa to grip frame is rusted. Definitely a project gun and sold as is. Grip has small crack on the inside at the screw. Cycles and holds air with no leaks but my tanks were leaking as I screw them in but seal on the last threads of the asa so the pin might be too far out. Looking for 65. Sold  Additional pics: 2 71. Aerostar Assassinator 1 #2 Decent shape assassinator. Has glue gunk on feedneck and sight rail. Sight rail isn't attached by glue, it is welded onto body as with all assassinators. Body is steel, barrel is aluminum and ano'd black and honned inside. Body still has parkarized style stock finish. Has definitely seen use and pump handle is stock aerostar type. Bolt and hammer are stock nelson. Barrel has dings. Frame rail has N4043238 lightly carved into the side. Has skorr trigger for autotrigger. Bottom of frame which front grip frame screw sits up against has been sanded down a little. Cycles with no leaks but will start leaking soon since the cup seal looks like junk. Looking for 100. http://www.mcarterbrown.com/gallery/...58/R_72_01.jpg Additional pics: 2 72. CMI Thunder Pig? Looking for 37. sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_73_01.jpg Additional pics: 2 73. Project Pro Star Lab Warrior Looking for 37. sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_74_01.jpg Additional pics: 2 74. Hammer Looking for 37. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...58/R_75_01.jpg Additional pics: 2 75. Kingman Hammer #2 Looking for 32. Sold (3-17-09)  http://www.mcarterbrown.com/gallery/...58/R_76_01.jpg Additional pics: 2 76. Rebline MKII with Green highlights Gone for 215. Sheridan guns: Parts are available, aftermarket grips, pumps and battle pumps, rvas, internals, bolts, stocks, ect… http://www.mcarterbrown.com/gallery/...8/R_312_01.jpg Additional pics: 2 3 4 5 6 7 312. Used shape old style PGP Has seen a lot of use but I aired it up and it cycles great and shoots nice. Used shape but works fine and cycles well. Has 2 set screw marks from a barrel extetion on either side of the barrel. Has dings on the sides of the front top tube cap. Grip frame is missing paint, and safety. Serial is D058272. Bolt ball bearings have been removed for smoother pumping. Looking for 62 Sold (8-09) http://www.mcarterbrown.com/gallery/...58/R_77_01.jpg Additional pics: 2 77. Earlier style PGP Looking for 70. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_78_01.jpg Additional pics: 2 78. Early mid model PGP Looking for 85 Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_79_01.jpg Additional pics: 2 79. Early model PGP - Trace 12 gram threads... Looking for 80. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_80_01.jpg Additional pics: 2 80. Old model PGP Looking for 63. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_81_01.jpg Additional pics: 2 81. Mid style PGP Looking for 74. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_82_01.jpg Additional pics: 2 82. PGP Looking for 65. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...58/R_83_01.jpg Additional pics: 2 83. Later style PGP Looking for 75. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...8/R_356_01.jpg Additional pics: 2 3 4 5 6 7 8 356. PGP 2 I would like 85 plus shipping. Sold (7-09) http://www.mcarterbrown.com/gallery/...58/R_84_01.jpg Additional pics: 2 84. Used PGP 2 Cycles fine with no leaks. Looking for 65. Sold (3-23-09) http://www.mcarterbrown.com/gallery/...58/R_85_01.jpg Additional pics: 2 85. Used PGP 2 Looking for 65. Sold http://www.mcarterbrown.com/gallery/...58/R_86_01.jpg Additional pics: 2 86. PGP 2 Looking for 68. Sold http://www.mcarterbrown.com/gallery/...58/R_87_01.jpg Additional pics: 2 3 4 5 6 7 8 9 87. Nickel PGP Looking for 140. Sold http://www.mcarterbrown.com/gallery/...58/R_88_01.jpg Additional pics: 2 3 4 5 6 88. Nickel PGP Looking for 150 Sold http://www.mcarterbrown.com/gallery/...58/R_89_01.jpg Additional pics: 2 3 4 5 6 7 8 9 10 11 12 89. Palmerized nickel PGP Sold for around 200. http://www.mcarterbrown.com/gallery/...58/R_90_01.jpg Additional pics: 2 90. Pursuit Pistol df Mac 1 conversion Looking for 76. Sold http://www.mcarterbrown.com/gallery/...58/R_91_01.jpg Additional pics: 2 3 4 5 6 7 8 91. PMI Sheridan Pursuit Pistol Looking for 210 . Sold (3-17-09) http://www.mcarterbrown.com/gallery/...58/R_92_01.jpg Additional pics: 2 92. PMI1 Body is in good shape but barrel has been trimmed down. Still looks good and the crown is nice. Has RVA for easy velocity adjustment. Has extended 12 gram plug, automag reg seal for Gram seal. Looking for 110 Sold http://www.mcarterbrown.com/gallery/...58/R_93_01.jpg Additional pics: 2 93. PMI 1 Looking for 145. Sold http://www.mcarterbrown.com/gallery/...58/R_94_01.jpg Additional pics: 2 94. PMI 1 Looking for 140. -Sold http://www.mcarterbrown.com/gallery/...58/R_95_01.jpg Additional pics: 2 95. PMI 1 Looking for 120 Sold http://www.mcarterbrown.com/gallery/...58/R_96_01.jpg Additional pics: 2 3 96. Beater PMI 1 DF Looking for 70. Sold (4-4-09) http://www.mcarterbrown.com/gallery/...58/R_97_01.jpg Additional pics: 2 97. PMI 1 DF Looking for 74.sold (3-22-09) http://www.mcarterbrown.com/gallery/...58/R_98_01.jpg Additional pics: 2 98. PMI 1 DF Looking for 63. Sold http://www.mcarterbrown.com/gallery/...58/R_99_01.jpg Additional pics: 2 99. Pmi 1 df #7 Looking for 85. Sold  Additional pics: 2 100. PMI 1 DF Nickel PMI 1 DF. Good shape but has a few flaws. Pre nickel solder job for the DF wasn't the cleanest. Has "FR-P-33" lightly engraved pre nickel on the back of the barrel above the bolt. Holds air and cycles great. Looks good, has extended 12 gram plug, RVA, automag frame, double ribbed pump although they don't match perfectly, stock sheridan 12 gram seal, stainless grip frame screws and speed demon bolt. Looking for 136. http://www.mcarterbrown.com/gallery/...8/R_101_01.jpg Additional pics: 2 101. PMI 1 Mac-1 DF conversion Looking for 103. Sold http://www.mcarterbrown.com/gallery/...8/R_102_01.jpg Additional pics: 2 102. Beater PMI 1 Mac-1 DF Avenger conversion Looking for 100. Traded http://www.mcarterbrown.com/gallery/...8/R_103_01.jpg Additional pics: 2 103. PMI 1 DF Mac 1 Conversion #11 Looking for 106. Sold http://www.mcarterbrown.com/gallery/...8/R_104_01.jpg Additional pics: 2 104. PMI 1 DF Mac-1 Avenger conversion Looking for 130. Traded http://www.mcarterbrown.com/gallery/...8/R_105_01.jpg Additional pics: 2 3 4 5 6 105. PMI 2 #1 Looking for 115. Sold http://www.mcarterbrown.com/gallery/...8/R_106_01.jpg Additional pics: 2 3 106. DF PMI 2 Sheridan with reverse stock and odd CA air set up. Looking for 67. Pending (Sold) [url]http://www.mcarterbrown.com/gallery/data/1058/R_107_01.jpg[url] Additional pics: 2 3 107. Piranha LB Looking for 86. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_108_01.jpg Additional pics: 2 108. Piranha LB Looking for 116. Sold http://www.mcarterbrown.com/gallery/...8/R_109_01.jpg Additional pics: 2 109. Nickel PMI Piranha LB #3 Looking for 233. Sold (4-4-09)  Additional pics: 2 3 110. Piranha SB Another Gabriel Tyler nickel piranha. Decent shape but barrel has pre nickel dings. Has quick strip notch, automag frame, and plastic pump. Mag frame is missing safety. Has mag rubber grips and side line is in good shape. Cycles well with no leaks. Front tube plug of bottom tube isn't nickel plated. Looking for 140.  Additional pics: 2 111. Piranha SB Another Gabriel Tyler nickel body. Good shape. Barrel has a few small dents. Has plastic pump, quick strip slot, speed demon bolt and ca. Front plate of bottom tube isn't nickel plated. Pump arm rod has some rust on it. Cycles well with no leaks. Nickel is polished finished but around the feed neck the finish is more matte. Looking for 150. Sold http://www.mcarterbrown.com/gallery/...8/R_112_01.jpg Additional pics: 2 112. P-68 SC Looking for 155. -Sold  Additional pics: 2 3 4 5 6 7 8 9 10 11 113. Stan Russell Marauder/ Mac -1 Annihilator Decent shape ancient Stan Russell Marauder or Annihilator. The two are identical except for small changes. Looks good but has some wear from use. Barrel is in very good shape but has a very small nick at the end of the barrel. Bolt on these earliest style Mac/Russel guns is different length than a pgp, pmi1 or even KP. Pump is cut on end but still looks good. Cycles great with no leaks. These were made around 1987 and built off either eb pistols or first model pgps. The one was built off a pgp and has a pgp lower tube. Pgp serial is D03629. Looking for 250  Additional pics: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 114. Project Annihilator Project Mac-1 Annihilator built off a PGP. PGP serial is D032841. I picked this up probably 4 years ago from someone who tried to seal the side tap with generous amounts of JB weld. I got all the jb-weld off and rebuilt the valve, and retraced all the threads with taps. Has mac-1 pump, stock pmi1 bolt, rva, extended 12 gram plug and black sheridan grips. Also has stock annihilator features such as passenger side quick strip, site rail, 13 inch barrel and right feed. Also still has the front site intact. I tried to seal the plug with some purple loctite but it didn't seal. I can attempt again if buyer wants me to. Previous owner also polished bottom tube for some reason. Should work fine once side tap is sealed but sold as is. Looking for 155. -Pending  Additional pics: 2 3 4 5 6 7 115. Mercenary Sheridan Body Kit Good shape overall but a few flaws. Grip frame body screw hole are kinda beat up and front screw hole is heliocoiled. Front side line air screw isn't original. Pump rod has some pitting, front of barrel has a funky crown on the out side. Back of bolt has set screw which isn't original but looks alright. Has trigger shoe, wood grips, bolt doesn't have wear on it. Underside of barrel has a little wear from pump. Overall good shape and cycles well with no leaks. Looking for 300.  Additional pics: 2 3 4 5 116. Cooper T imp kit with undershot bolt Good shape but has seen use. End of brass valve piece has been sanded lightly to remove some burs. Is complete and includes valve, undershot bolt, rail, pin, trigger, sear, trigger spring, main spring, and rear cap. Looking for 150.  Splatmasters and NSG markers All guns include standard screw but can be replaced with a speed wheel for 8 more. http://www.mcarterbrown.com/gallery/...8/R_117_01.jpg Additional pics: 2 117. Splatmaster Looking for 34. Sold http://www.mcarterbrown.com/gallery/...8/R_118_01.jpg Additional pics: 2 118. Splatmaster Looking for 34. Sold http://www.mcarterbrown.com/gallery/...8/R_119_01.jpg Additional pics: 2 119. Splatmaster Looking for 31. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_120_01.jpg Additional pics: 2 120. Splatmaster -34 Looking for 34 Sold http://www.mcarterbrown.com/gallery/...8/R_121_01.jpg Additional pics: 2 121. Splatmaster Looking for 31. Sold http://www.mcarterbrown.com/gallery/...8/R_122_01.jpg Additional pics: 2 122. Splatmaster Looking for 34. Sold http://www.mcarterbrown.com/gallery/...8/R_123_01.jpg Additional pics: 2 123. Splatmaster Looking for 34. Sold http://www.mcarterbrown.com/gallery/...8/R_124_01.jpg Additional pics: 2 124. Splatmaster Looking for 34 Sold http://www.mcarterbrown.com/gallery/...8/R_125_01.jpg Additional pics: 2 125. Splatmaster Looking for 30.Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_126_01.jpg Additional pics: 2 126. Splatmaster Looking for 33 Sold http://www.mcarterbrown.com/gallery/...8/R_127_01.jpg Additional pics: 2 127. Splatmaster Looking for 34. Pending (3-18-09)  Additional pics: 2 3 4 5 128. Splatmaster Good shape. Has pgp top tube pinned into the feed and can take a Sheridan speed loader on the front. Figure 8 has crack on the top but is glued in place. Includes standard 12 gram knob. Looking for 50.  Additional pics: 2 129. Rapide Cycles great with no leaks. Has bush carved lightly into the NSG splat. Also painted rattle can cameo. I replaced the double action catch and the detent with NOS parts. Serial is K69745 R. Includes standard 12 gram knob. Looking for 34. (pending 4-4-09)  Additional pics: 2 130. Rapide Well used rapide but holds air and cycles great. Interior of trigger has lots of wear. Exrental and has some spray paint on the front. Serial is K72341 and detent is in good shape. Includes standard 12 gram knob. Looking for 35. Sold  Additional pics: 2 131. Rapide Parts gun Another ex rental rapide in well used shape and valve leaks. Has good detent and has spots of brown paint and some black rattle can paint on front also as well as ball clip and has a lot of dents and scratches. Well used. Serial don't match on either side, K72340. And 72343. Looking for 25 with clip or 17 without clip.  Additional pics: 2 132. Rapide Cycles well. Has direct feed adapter on feed block. Can include a standard unmodified feed block for 1 dollar more. Can include an ammo box for 6 or a ram box for 10. Elbow feed is spray painted and is made from a PVC 45 cut to fit. Has 22 sharpied on the side from probably 20 years ago. Serial is K85458. Includes standard 12 gram knob. Looking for 37. Sold  Additional pics: 2 133. Rapide Good shape Rapide. Has 23 written in sharpie on the driver side. Cycles well with no leaks. Has some rattle can paint on fron of barrel and on clip. Includes standard 12 gram knob. Serial is K85459. Looking for 40. http://www.mcarterbrown.com/gallery/...8/R_134_01.jpg Additional pics: 2 3 4 134. Rapide Sold http://www.mcarterbrown.com/gallery/...8/R_135_01.jpg Additional pics: 2 135. Rapide Decent shape but dirty. Has sharpie number 5 on the passenger side. Cycles well with no leaks. Includes standard 12 gram knob. Serial number is K72338. Looking for 33. Sold http://www.mcarterbrown.com/gallery/...8/R_136_01.jpg Additional pics: 2 136. Rapide Looking for 35. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_137_01.jpg Additional pics: 2 137. Rapide Good shape rapide. Has rental stamped into driver side towards the back. Cycles well and holds air with no leaks. Clip isn't drilled for view holes. Still has sticker on the front of the barrel but all the text has worn off. Includes standard 12 gram knob. Serial is L31131 Looking for 37. Sold  Additional pics: 2 138. Rapide Good shape but as with others has some blemishes. Barrel has some rattle can paint on it. Clip adapter plate has some gunk on it. Has #3 sharpied on the side very lightly. Cycles well with no leaks. Includes standard 12 gram knob. Serial is K425759 Looking for 38. Sold  Additional pics: 2 139. Rapide Good shape and cycles well but has Rental stamped towards the back on the drivers side. Serial L31141. Still has clear stickers around the barrel although the warnings have worn off them. Clip has rattle can paint on it. Includes standard 12 gram knob. Looking for 35  Additional pics: 2 140. Rapide Excellent shape Rapide. In box and looks new but I am not sure it is it. Has green special forces 12 gram in the grip but that might have been from testing at NSG. I didn't test it but it shouldn't have any problems. Has some paper work in side box but I didn't see a manual. Has a spot of white paint under trigger which I can't figure out why. Includes standard 12 gram knob. Serial is L79338 Looking for 65 Sold  Additional pics: 2 141. GZ-1000 Good shape but has some dirt on it. Uses splastmaster internals. Holds air and cycles well. Includes standard 12 gram knob. Serial is P13134 Looking for 40.  Additional pics: 2 142. GZ-1000 Good shape but has some dirt on it. Uses splastmaster internals. Holds air and cycles well. Includes standard 12 gram knob. Serial is P21502 Looking for 33.  Additional pics: 2 143. GZ-1000 Decent shape but has some dirt on it and feed plate screw is jacked up so feed plate is glues on and it is on there well. Uses splastmaster internals. Includes standard 12 gram knob. Serial is P15785 Looking for 28.  Additional pics: 2 144. GZ-1000 Good shape but has some dirt on it. Uses splastmaster internals. Cycles well and holds air. Includes standard 12 gram knob. Serial is P15786. Looking for 33.  Additional pics: 2 145. GZ-1000 Decent shape but has some dirt on it. Uses splastmaster internals. Serial is P15784. Holds air and cycles well. Includes standard 12 gram knob. Looking for 33.  Additional pics: 2 146. GZ-1000 Good shape but has some dirt on it. Uses splastmaster internals. Cycles well with no leaks. Includes standard 12 gram knob. Serial is P15792 Looking for 33. Sold  Additional pics: 2 147. GZ-1000 Good shape but has some dirt on it especially on the grip frame. Uses splatmaster internals. Cycles well with no leaks. Includes standard 12 gram knob. Serial is P15774 Looking for 33.  Additional pics: 2 148. GZ-1000 Sold http://www.mcarterbrown.com/gallery/...8/R_149_01.jpg Additional pics: 2 149. GZ-1000 Looking for 27. Sold  Additional pics: 2 150. GZ-1000 Has a lot of dirt on it and is missing safety. Uses splatmaster internals. Cycles well with no leaks and shoots well. Includes standard 12 gram knob. Serial is P15781. Looking for 30.  Additional pics: 2 151. Parts gun GZ-1000 Shells are in alright shape but have scrapes and dings from use and have #1 written on side from being past ex rental. Has metal detent and does shoot when it cycles and also has slow leak, and also missing safety, also missing co2 knob. Serial is P15789. Looking for 23. http://www.mcarterbrown.com/gallery/...8/R_152_01.jpg Additional pics: 2 3 4 152. Brand new GZ-2000 Looking for 120. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_153_01.jpg Additional pics: 2 153. BE Short Barrel Nightmare SOLD Sold for 175 shipped.  Additional pics: 2 3 4 5 6 154. Project BE Short Barrel Nightmare Looking for 120. Sold http://www.mcarterbrown.com/gallery/...8/R_155_01.jpg Additional pics: 2 3 4 5 6 7 8 155. BE Long Barrel Nightmare Sold (3-21-09) http://www.mcarterbrown.com/gallery/...8/R_156_01.jpg Additional pics: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 156. BE Long Barrel Nightmare Looking for 285. Sold http://www.mcarterbrown.com/gallery/...8/R_157_01.jpg Additional pics: 2 Looking for 37. Parted  Additional pics: 2 158. King Cobra Decent shape but has many scratches from use. Has wear on pump arm screws, direct feed, knicks on end of barrel, screws hole on front of valve have significant wear but screws still grab decently. Cycles decently but valve was dumping gas from rear of valve when fired. Valve needs a rebuild and probably a stronger valve spring. Looking for 55. Sold  Additional pics: 2 159. BE Cobra BE cobra in great shape with point zero sight. Has trigger shoe. Cycles great with no leaks. Has no pump arm wear but internals has a little corrosion on them. Looking for 70 or 65 without trigger shoe or -10 more without sight. Sold  Additional pics: 2 160. Old school Be Jaguar BE Good shape Jaguar but missing outer metal linkage line and safety. Has minor dings and Brass eagle point zero site. Air up with no leaks but double action arm doesn't let bolt forward all the time. Looking for 125.  Additional pics: 2 161. Brass Eagle - Golden Eagle Keeping this one  Additional pics: 2 162. Project BE poison Bad Used shape. Whole body is polished and missing front bolt, driver side grip panel, barrel and bolt screw clip. Does cycles well with no leaks though. Looking for 45 -Parted  Additional pics: 2 163. BE Poisen Decent shape but has a few dings from use. Has all parts, has some lettering still on linkage arm, Poison logo has mostly lost lettering bur little on top remains. Rear side set screw for back bottle is partially stripped but bottom rear asa screw has good threads to hold back bottle on well. Has minor scratches as well as machining marks on top rail. Replaced main valve seal and cycles great. Looking for 70.  Additional pics: 2 164. Tiger shark A step up from the Talon. Cup seal leaks. Looking for 12 http://www.mcarterbrown.com/gallery/...8/R_165_01.jpg Additional pics: 2 165. Tiger stripe BE Stingray I plastic Looking for 16. Sold http://www.mcarterbrown.com/gallery/...8/R_166_01.jpg Additional pics: 2 166. Talon In between the Tiger shark and the Vulcan... Untested... Sold (3-18-09)  Additional pics: 2 167. Clear Talon Good shape. Not tested. Looks complete. Cocks and releases without air. Looking for 13.  Additional pics: 2 168. BE Blade Used shape, lots of scratches. Cocks and releases without air. I didn't air it up, so untested. Has 12 changer bucket. Looking for 10. http://www.mcarterbrown.com/gallery/...8/R_169_01.jpg Additional pics: 2 169. Brass Eagle Maurader Looking for 22. Sold http://www.mcarterbrown.com/gallery/...8/R_170_01.jpg Additional pics: 2 170. Vulcan 5000 ...Looking for 15? Sold All smgs include 10 orange smg 60 clips. If you would like more clips or other accessories please pm me about prices.  Additional pics: 2 3 171. Project Sideline Smg 60 Used shape. Has rust in barrel, has wear on sideline screw head, has small beginning of a crack at the rear of the receiver. On the plus side it cycles well with no leaks in full auto. Has rear adjustment screw on back and I replaced the orings in the sideline air. Shroud came loose and hardline is leaking. And to top it off it looks like the hardline originally had JB weld over the soldier. Still shoots alright but sold as a project gun. Looking for 135. Serial on underside reads: RS 505 (pending) http://www.mcarterbrown.com/gallery/...8/R_172_01.jpg Additional pics: 2 3 172. Sideline SMG 60 Old hardline version. Missing foregrip Has trigger adjustment screw site. Cycles fine, no leaks. Replaced some rings and made sure valve was in good shape. Serial #HT749 Looking for 150 Sold  Additional pics: 2 3 173. SMG 60 Spray painted green, has plastic front site but it has chipped part of I'd piece at end of the barrel off. Has trigger set at semi. I think it can be adjusted to full auto. Replaced some rings and made sure valve was in good shape. Lone star style grip has crack on end. Cycles and shoots fine although orange clips occasionally get stuck when going through breach. - $150 Serial # S3527 http://www.mcarterbrown.com/gallery/...8/R_174_01.jpg Additional pics: 2 3 174. SMG 60 Looking for 235. Sold  Additional pics: 2 3 175. SMG - 60 Holds air, fixed internal leak, has trigger stop and cycles great in full auto, Serial 3036 -215 -Sold  Additional pics: 2 3 4 176. SMG 60 Looks Great. Later model SMG 60. Serial is 6768 and it has the serial sticker instead of the number punched on the bottom. Cycles great with no leaks. Has grooved trigger set in semi only mode now. I think the sear can by adjusted for full auto and has both sling mounts but no sling. Missing front plastic sight. Has slight rust on body and clip arm. Looking for 230.   Additional pics: 2 177. 1. 68 Special #1 Holds air, excellent shape. Serial 4296. Looks like the feed have the beginning of the awful crack that plagues many 68 specials. Looking for 65.Sold  Additional pics: 2 178. 68 Special Holds air, cycles. Screws on bottom of breech beat up and will like all 68 special breech screw eventually get stripped. No strap. Very good shape. Serial 6203 -65  Additional pics: 2 179. 4. 68 Special #3 Holds air, cycles, good shape, serial 7676, sling ring is rusted. Looking for 75 http://www.mcarterbrown.com/gallery/...8/R_180_01.jpg Additional pics: 2 180. 68 Special Looking for 50 Sold http://www.mcarterbrown.com/gallery/...8/R_181_01.jpg Additional pics: 2 181. 68 Special Looking for 100. Sold http://www.mcarterbrown.com/gallery/...8/R_182_01.jpg Additional pics: 2 182. Tippmann SL-68 Looking for 87. Sold  Additional pics: 2 183. Tippmann Pro-Am Great shape, and cycles well. Replaced all ring throughout gun and valve. Not sure if hammer to bolt linkage or bumper between hammer and back plate is stock. Barrel is honed, assuming that is stock from Tippmann. Foregrip is cast as well as frame. Comes with plastic Tippmann case. Looking for 75. http://www.mcarterbrown.com/gallery/...8/R_184_01.jpg Additional pics: 2 3 4 184. Prolite Looking for 40 sold (3-18-09)  Additional pics: 2 185. Tippmann Minilite Has what looks like a powder coat or it could be thick spray paint in matte black over entire body and front of barrel. Body is raw and is in great shape if you don't mind the powder coat. Has minilite asa adapter. Includes air plug for one of the asas. Cycles great with no leaks. Looking for 70 or 67 without air plug. Sold  Additional pics: 2 3 4 5 6 7 186. FA Very good shape but has a few small minor flaws. Sticker on windup loader is a little dirty and has slight rips at the sides. A Couple of the screw securing the grip frame together have slight rust on the heads and hammer has some gunk on it. I test fired this gun and it shot great with air and without in both semi and full auto. After adding paint it shot fine and loaded great in both semi and full until the tank got low then it chopped in full auto. Serial number is 318 Looking for 267  Additional pics: 2 187. Used 68 Carbine Used 68 Carbine in decent shape but has a few flaws. Barrel is scrapped and dinged and off a prolite rental. Has macroline fitting into valve and glue/gunk was used generously to seal it. Has macroline to aci duckbill. Cycles but hiccups occationally and will need hammer oring replaced. Has plastic 45 frame with panels. No leaks. Serial is 9787. Looking for 37. Sold http://www.mcarterbrown.com/gallery/...8/R_188_01.jpg Additional pics: 2 188. Pro/Carbine Sold (3-16-09)  Additional pics: 2 189. Tippmann Model 98 Standard 98 with White Powder Coat, not sure if the power coat is stock. Has holes drilled in gills, nicely done. Has LAPCO rear velocity aduster. Has hole cut in plastic grips so the body can be easily dissasembled. Also has brass vertical air adapter installed. Got this with some guns modified by Docs Machine so this M-98 could have been worked on by him also. Nice looking and great shooting 98. Looking for 70 or make an offer. Sold for 65  Additional pics: 2 190. Sheridan VM-68 Very well used Sheridan VM-68. Body has tons of battle scars (scratches) all over it and has set screw marks from sight rail. Body ano is the type that fades away. I replaced the feed finder with a new one. Cycles well with no leaks. Front sight on feed block is missing the pin which sits on the brass hex. Brass hex is there but not the pin. Missing the stainless sleeves that goes over the cocking screw. Barrel has some residue from tape on it and was cut down but looks clean at the end. Has cocking slots on both sides and serial is P084951. Front ASA has the chrome or nickel removed and has been secured with red loctite. Looking for 50. Pending  Additional pics: 2 191. VM-68 Another well used VM although not quite as bad as the last one. Body has lots of scratches and has one set screw mark from a sight rail. Has double cocking slots and has quick strip screw on top plug screw. Cycles well with no leaks. I replaced the feed fingers. Missing the stainless sleeve that goes over the cocking screw and has the sight pin intact. Barrel looks good. Has the anno type on the body that fades easily. Side plate has cracks near front passenger side screw. Serial is P068863. Looking for 65. http://www.mcarterbrown.com/gallery/...8/R_192_01.jpg Additional pics: 2 192. VM-68 Looking for 70. Sold http://www.mcarterbrown.com/gallery/...8/R_193_01.jpg Additional pics: 2 193. VM-68 Looking for 70. Sold (3-17-09)  Additional pics: 2 194. VM-68 I think this is a VM Magnum but I'm not totally sure. Good shape but has a few scratches. Has enlarged pre anno air chamber as well as later type serial as well as enlarged body air hole and incorporated larger trigger. Also has all stainless screws and the green orings on the valve. One side of the valve when the large air port is facing down is begining to strip. ASA has two wrench marks. Replaced feed finger and side plates don't have any cracks. Feed has brass sleeve so it can take a normal type elbow. Has black annodized aftermarket barrel which resembles a PMI ceramic. Has dings but bore is great. Serial is 495704068. Looking for 85. http://www.mcarterbrown.com/gallery/...8/R_195_01.jpg Additional pics: 2 195. FAST F-2 Looking for 55. SOLD a while back and I forgot about it... http://www.mcarterbrown.com/gallery/...8/R_196_01.jpg Additional pics: 2 3 4 196. Fast F-2 Traded http://www.mcarterbrown.com/gallery/...8/R_197_01.jpg Additional pics: 2 3 4 5 6 7 8 9 197. AFT Looking for 250 with a leg clip holder (although gun only has one clip).Sold (3-19-09)  Additional pics: 2 198. ACI Griffin Looking for 37. Sold (3-19-09) http://www.mcarterbrown.com/gallery/...8/R_199_01.jpg Additional pics: 2 199. Spyder Classic Looking for 55. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_200_01.jpg Additional pics: 2 200. Spyder classic Looking for 55. Sold http://www.mcarterbrown.com/gallery/...8/R_201_01.jpg Additional pics: 2 201. Spyder Classic Looking for 53. Sold http://www.mcarterbrown.com/gallery/...8/R_202_01.jpg Additional pics: 2 202. Spyder Classic Looking for 48. Sold (3-19-09) http://www.mcarterbrown.com/gallery/...8/R_203_01.jpg Additional pics: 2 203. Spyder Classic Looking for 33. Sold (7-09)  Additional pics: 2 204. Spyder Classic Looking for 75. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...8/R_205_01.jpg Additional pics: 2 205. Classic or compact Spyder Looking for 65 with expansion chamber and bottomline or 58 without. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...8/R_206_01.jpg Additional pics: 2 206. Spyder Classic Beater Looking for 32. Sold (3-16-09) http://www.mcarterbrown.com/gallery/...8/R_207_01.jpg Additional pics: 2 207. Spyder Classic Beater Looking for 37 Sold (3-16-09)  Additional pics: 2 208. Spyder TL Good shape, typical scratches from light use and cycles well. Replaced cup seal and changed hammer oring. Writing on grip frame still looks strong. Front air chamber is marked up on the end flat head screwdriver notch and around the cylinder also. Looking for 60. http://www.mcarterbrown.com/gallery/...8/R_209_01.jpg Additional pics: 2 209. Spyder Shutter- Blue Looking for 50. Sold (7-09) http://www.mcarterbrown.com/gallery/...8/T_361_01.jpg Additional pics: 2 361. Spyder purple Decent shape. Steel braided has light rust. Missing paper clip size pin on passenger side. Farts and doesn't recock. Missing cocking knob for rear cocking. Looking for 35 http://www.mcarterbrown.com/gallery/...8/R_210_01.jpg Additional pics: 2 210. Icon Z Spyder Decent shape exterior but both screw holes on the body that hold the grip frame on are almost all the way stripped out. Cycles fine with no leaks. Has safety pin for securing rva retaining pin. Missing velocity locking allen set screw. Uses cocker detents. Looking for 24. Sold  Additional pics: 2 211. Pirahna Eforce Used shape and kinda beat up. Chrome plated frame has dings and crud in on/off switch pocket but works well. Replaced hammer and bolt oring and E trigger sear spring. Old spring is also included. Cycles well now. Has a standard bottomline. Includes stock barrel. Grips feel nice but are starting to tear along bottom of crease at edge of grip. It will be shipped without a 9v. Looking for 55 http://www.mcarterbrown.com/gallery/...8/R_212_01.jpg Additional pics: 2 3 4 212. Bob Long Millenium Spyder Leaks out of vert asa and front lpc doesn't thread into lpc all the way. Threads on rear velocity adjuster are in bad shape. Has number stamped on grip which I am assuming is a serial of 0098. Bolt has corrosion/ wear caused by paint and cycling. Good shape otherwise and body exterior is clean. Looking for 75. Sold  Additional pics: 2 213. AM sentinel Decent shape but has seen heavy use as a rental. Valve on Sentinels are Aluminum and will eventually start to leak. When aired up the cup seal leaked for a second but then stopped leaking and cycled fine. Velocity is adjusted at the front with an allen screw. Take cocker barrels and bolt is quick stripped through the top. Has an anno blem at the base of the back of the trigger frame. I think this Sentinel has a threaded feedneck. Serial is 002448. Takes 2X (one on either side) cocker detents and has one stock and one brass. Body has some light scratches and extended chamber is a more matte color and has scratches. Looking for 55.  Additional pics: 2 3 4 214. AM sentinel Decent shape but has seen heavy use as a rental. Valve on Sentinels are Aluminum and will eventually start to leak. Cycles fine. Velocity is adjusted at the front with an allen screw. Take cocker barrels and bolt is quick stripped through the top. Has an anno blem at the base of the back of the trigger frame. This sentinel has a threaded feedneck. Serial is 002508. Takes 2X (one on either side) cocker detents. Both are stock aluminum. Body has some scratches and extended chamber is a more matte color and has scratches. Interior of body also has a spot ground down where the bolt cycles. Grip frame also has scratches and barrel isn’t stock. Looking for 42 with generic cocker barrel or 52 with stock AM barrel. http://www.mcarterbrown.com/gallery/...8/R_215_01.jpg Additional pics: 2 215. AM Sentinel Looking for 53. Sold  Additional pics: 2 216. AM Sentinel Great shape. Has factory engraved AM Rental 27 on the passenger side and Actionmarkers.com on the other. Has drop and bottomline and is in great shape except the rear bottom tube plug has some dings. Stock barrel is cocker threaded and has both of the stock detents which are aluminum. Cycles great with no leaks. Looking for 80.  Additional pics: 2 217. Brute - A - Matic! Looks like crap! Doesn't leak but also doesn't cock. Own a rare Brazilian pile of stench for only 10 bucks. Has a wire detent, a pvc plug for the rear cap. http://www.mcarterbrown.com/gallery/...8/R_218_01.jpg Additional pics: 2 218. Arrow Precision Inferno Heat Used shape. All metal, vert feed and top pull pin for bolt disconnect. Cycles great with no leaks. Serial is 022018. Looking for 41. Traded http://www.mcarterbrown.com/gallery/...8/R_219_01.jpg Additional pics: 2 3 4 5 6 7 8 9 10 11 12 13 219. Viper M-1 Looking for 104 with stock or 94 without. Also, I can take off the site rail for minus 4. Sold(3-16-09) http://www.mcarterbrown.com/gallery/...8/R_220_01.jpg Additional pics: 2 220. Viper / Vector M1 Looking for 65. Sold (3-16-09)  Additional pics: 2 221. GT- 2000 Used but decent shape. Head of screws holding feed onto body are in bad shape and are hard to get a good grip to remove the feed to clean behind it. Cycles well with no leaks. Has two 1/8 inch holes drilled 1/8 of an inch down into the site rail. Has no effect on gun. Holes were used for a scope. Looking for 26. http://www.mcarterbrown.com/gallery/...8/R_222_01.jpg Additional pics: 2 222. Pariot 2 Looking for 65. Sold http://www.mcarterbrown.com/gallery/...8/R_223_01.jpg Additional pics: 2 223. JT Misc Stack Tube Blowback Looking for 30. Sold http://www.mcarterbrown.com/gallery/...8/R_224_01.jpg Additional pics: 2 224. PT Extreme Looking for 56. Sold (3-27-09) http://www.mcarterbrown.com/gallery/...8/R_310_01.jpg Additional pics: 2 3 4 5 6 310. Promaster Looking for 53 -Sold  Blades: http://www.mcarterbrown.com/gallery/...8/R_225_01.jpg Additional pics: 2 3 225. Blade 1 Looking for 135. Sold  Additional pics: 2 226. Blade 2 Blade two in decent shape. Blades 1 and 2 have several differences, different trigger linkages, completely different cast body, vertical asa, easy field stripping and barrel milling. Serial is 95070017. As best I can determine serial numbers are based on month and year since I have another blade two with a serial of 95050017. Cycles great, shoots well and is much easier to shoot then its processor mainly because of the trigger grouping. I replaced the hammer oring with a new hammer oring. Hammer has light rust and feed has a corner milled down. Looking for 140. pending http://www.mcarterbrown.com/gallery/...8/R_227_01.jpg Additional pics: 2 3 4 227. P.E.C. Master Looking for 76 or 73 without vertical asa plug. Sold (3-16-09)  Additional pics: 2 3 4 5 6 228. Bobcat Serial # 5B7111 The end of the barrel has a ding as well as the end of the feed. Neither interferes with performance and both are pretty small. I took photos to show both dings and the euro grip that is on it has a few scratches. Has 12 inch Taso Power series stainless barrel. Looking for 60. http://www.mcarterbrown.com/gallery/...8/R_229_01.jpg Additional pics: 2 229. ICD Bobcat Looking for 70 or can include foam barrel shroud for 4 more. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_230_01.jpg Additional pics: 2 230. Alley Cat "Death or Glory" - Project Gun Serial 7AC3059 Very well used. Has Death or Glory engraved on the side of the body opposite the cocking slot. All the parts are there but needs to be well cleaned. Aired it up and no leaks but doesn't cycle. Feels like bolt ring has swollen. Lonestar grips are missing trap door and have "4" carved into them. Has 12 inch Taso Power series stainless barrel. Sold as is. Looking for 35 Sold http://www.mcarterbrown.com/gallery/...8/R_231_01.jpg Additional pics: 2 231. Alley Cat Looking for 55 Sold http://www.mcarterbrown.com/gallery/...8/R_232_01.jpg Additional pics: 2 232. ICD Puma Looking for 65 Sold  Additional pics: 2 3 4 5 6 7 8 233. Desert Fox Good shape Fox with gutted main reg. I replaced the powertube oring and it shoots good with no leaks. Anno on main body/breech isn't as dark as reg, grip, asa, and rail. Finish isn't as nice either. Threads in asa are a little too coarse for my stabilizer to thread in so I ran an asa extender and then a stab. I think I ran this at 350 PSI. Will include either stock barrel or j and J 2 piece. 45 grip has ding on bottom back driver side edge where it looks like it was dropped. 45 grip can be replaced as it has an m-16 mounting system. Serial is 8FX6204 Looking for 220 with the j and j 2 piece for 200 with just the stock barrel. Sold for 180 plus shipping with the J and J 2 piece barrel. http://www.mcarterbrown.com/gallery/...8/R_234_01.jpg Additional pics: 2 3 234. Project B2K Looking for 40. Sold (4-4-09) http://www.mcarterbrown.com/gallery/...8/R_235_01.jpg Additional pics: 2 235. ICE Epic Sold for 365. http://www.mcarterbrown.com/gallery/...8/R_236_01.jpg Additional pics: 2 3 4 5 6 7 8 9 236. ICE Epic Looking for 335. Sold http://www.mcarterbrown.com/gallery/...8/R_237_01.jpg Additional pics: 2 3 4 237. Montneel Mega Z convert New Z-1 Looking for 150. Sold (3-17-09) http://www.mcarterbrown.com/gallery/...8/R_238_01.jpg Additional pics: 2 3 4 238. Beat Project Victory Z Looking for 150. Keeping this one…  Additional pics: 2 239. USI Eliminator Decent external shape but beat to hell inside. End of powertube is splitting into multiple pieces. Bolt pin in stripped. Valve leaks and needs new external and I would guess internal o rings. Back body, top rail and frame rail as well as barrel are dark blue but body mainpiece is black. Has wire detent. Looking for 45.   AGD Twistlock Automags and various other mags… (these are only available with barreless mags)... Some of these mags include barrels, other don’t. Those that don’t can include any barrel from the list below. Any barrel that is followed by “-0” means that it can be included at no charge. Any barrel that is followed by”-1, -2, -3, -4, -5, ect…” means that if you want that barrel with the mag then you can subtract that amount from the price. And barrel that is followed by “+1, +2, +3, +4, +5, ect…” means that to add that barrel then you will need to add that much to the listed price. Lengths listed next to the barrels are a measurement from one end to the other so I didn’t subtract the area that goes into the breech.  Each barrel will come with wire nubbins unless otherwise stated and good shape barrel orings. If you want plastic nubbins you will need to add 1 dollar unless the barrel takes two then you will need to add 2 dollars to the price.  Mag Stock barrels top to bottom Stock bull barrels 1.Wear on breech end -0 2.Wear on breech end-0 3. Wear on breech end-0 4.Wear on breech end and stick em on barrel -1 5. Heavy wear, 2x detents -2  Crown point barrels 6. Breech end wear, and tip wear, ding -2 7. Matte classic finish dirty at breech-0 8. Light wear -0 9. Deveral small dings and breech wear-0  Minimag barrels 10. Dirty on outside-1 11. Has stock sticker, light breech pin scrap +2 12. Has sticker all the way through it -2. 13. Exellent shape brand new +4 14. Light wear -0  RT stock barrels, these have dual detents 15. Breech wear +1 16. Breech wear and ding on end -3 17. Breech wear +2 18. Brand new +6 Sold 19. Breach wear +2  Sp Barrels 20. 15.5 inch Red black silver splash aa barrel, heavy breech wear, and small dings from use -10 sold (3-23-09) 21. 15.5 inch Black AA, breech wear and light dings +8 Sold 22. 15.5 inch Black AA, good shape light stickem +12 Sold (4-18-09) 23. 12 inch great shape AA +10 pending (3-23-09) 24. 14 inch New style tear drop, seen lots of use -+6 25. 14 inch Great shape progressive, looks new +10 26. 12 inch Tear drop, heavy breech wear and dings +6 27. 12 inch old school AA, looks new one small ding on tip and light breech scrap+13  Dye barrels 28. 14 inch Light use black alum +12 Sold (4-18-09) 29. 14 inch Black alum, great shape but has some paint because I didn't wash it off +15 Sold 30. 14 inch Dye stainless, used but good shape +15 sold (3-19-09) 31. 14 inch Boomstick in light use shape has dings around end of barrel +20 Sold 32. 12 inch Boomstick, excellent shape, light breech wear +22 sold (3-17-09)  Misc aftermarket barrels 33. 12 inch Lapco bigshot - has large scrapes on the front +5 sold (3-19-09) 34. 14 inch CP great shape small dings, looks good +10 Sold 35. Taso windforce, breech wear +6 36. 11 inch ACI zero gravity , good shape great shape but aci logo is wearing off +8 -Sold 37. 14 inch Misc aluminum barrel new+6 38. 14 inch J and J ceramic, has T slot, looks good but light breech wear +9 pending (3-25-09) 39. 14 inch J and J brass with light wear on breech and tip. Has striaght rifling, has T slot +8 -Sold 40. 14 inch J and J chrome or nickel brass with straight rifling. Looks great, but has breech wear on T slot and light wear on plating toweards front +11 Sold (4-18-09) http://www.mcarterbrown.com/gallery/...8/R_240_01.jpg Additional pics: 2 240. Old School Level 6 Mag Excellent old school back bottle mag. Has old style matte valve instead of polished. Matching weld around feed. Has cast frame. Valve is pre stars, so it has no stars. Valve reg has straight slot with no extra holes. Valve also has ring clip on the front around the powertube, old style power tube front, reg stack pack and reg brass housing are old style. Frame doesn't have safety. Many of the orings throughout had deteriorated from sitting in oil I guess because this gun hasn't seen much use so I replaced them. Serial is CF01602 Cycles great with no leaks. Looking for 175. Sold http://www.mcarterbrown.com/gallery/...8/R_241_01.jpg Additional pics: 2 241. Old School Green Automag Looking for 120. Sold (3-26-09) http://www.mcarterbrown.com/gallery/...8/R_242_01.jpg Additional pics: 2 242. Straight right feed mag Looking for 109. See barrel pics above for barrel selection. -Sold http://www.mcarterbrown.com/gallery/...8/R_243_01.jpg Additional pics: 2 243. Automag Straight right feed Looking for 98. See barrel pics above for barrel selection. -Sold http://www.mcarterbrown.com/gallery/...8/R_244_01.jpg Additional pics: 2 244. Old style Smart Mag Looking for 150. See barrel pics above for barrel selection. -Sold http://www.mcarterbrown.com/gallery/.../R_245_011.jpg Additional pics: 2 245. Automag Looking for 106. -Traded http://www.mcarterbrown.com/gallery/...8/R_246_01.jpg Additional pics: 2 3 246. Straight feed Mag Looking for 106. See barrel pics above for barrel selection. -Sold http://www.mcarterbrown.com/gallery/...8/R_247_01.jpg Additional pics: 2 247. Powerfeed left mag Looking for 110. See barrel pics above for barrel selection. Sold (4-18-09) http://www.mcarterbrown.com/gallery/...8/R_248_01.jpg Additional pics: 2 248. Automag Looking for 110. Sold http://www.mcarterbrown.com/gallery/...8/R_249_01.jpg Additional pics: 2 249. Automag Classic Looking for 104. See barrel pics above for barrel selection. Sold http://www.mcarterbrown.com/gallery/...8/R_250_01.jpg Additional pics: 2 3 4 250. PMI Charger Mag Looking 120. Sold http://www.mcarterbrown.com/gallery/...8/R_251_01.jpg Additional pics: 2 251. Classic Automag Looking 105 Sold (4-18-09) http://www.mcarterbrown.com/gallery/...8/R_252_01.jpg Additional pics: 2 252. Classic Left powerfeed Automag Looking for 103. See barrel pics above for barrel selection. Sold http://www.mcarterbrown.com/gallery/...8/R_253_01.jpg Additional pics: 2 253. Classic Automag Looking for 110. See barrel pics above for barrel selection. Sold http://www.mcarterbrown.com/gallery/...8/R_254_01.jpg Additional pics: 2 254. Beat Automag Looking for 88. See barrel pics above for barrel selection. Sold http://www.mcarterbrown.com/gallery/...8/R_255_01.jpg Additional pics: 2 255. Automag Looking for 113.Sold.  Additional pics: 2 3 4 5 6 7 363. Parts Automag Serials on valve aren't matching, has marks from use on rail, and vertical adapter. Has Powerfeed right body. Back of valve has marks from tourney lock. Cycles well with no leaks. Looking for 95. See barrel pics above for barrel selection. Pending. http://www.mcarterbrown.com/gallery/...8/patch_02.jpg http://www.mcarterbrown.com/gallery/...8/R_256_01.jpg Additional pics: 2 256. Power feed right Minimag Looking for 120. See barrel pics above for barrel selection. Sold (3-25-09)  Additional pics: 2 3 4 5 6 7 8 369. Pro Teams Micro Mag: Good shape but some scraps and dings from use. Notable dings would be several marks on the barrel which are obvious in the photos as well as wear on the front side of the bottom of the powerfeed. Cycles great and shoots excellent. I can add a gas through and bottomline for 10 more. Has a micromag valve, serial number GFX001347. Threads for powerfeed are in great shape. Looking for 200 sold  Additional pics: 2 257. Smart mag Looking for 120. See barrel pics above for barrel selection. Sold (3-27-09) http://www.mcarterbrown.com/gallery/...8/R_258_01.jpg Additional pics: 2 258. ULE Retro Mag Looking for 200. Sold http://www.mcarterbrown.com/gallery/...8/R_259_01.jpg Additional pics: 2 3 4 5 6 7 8 259. ULE Emag Looking for 680 and I can add the programmer cord for 36 more. If interested ask for barrel selection. Gone (3-19-09) http://www.mcarterbrown.com/gallery/...8/R_260_01.jpg Additional pics: 2 3 4 5 6 7 260. Tuna Mag Superb shape. Has Exile body, tuna rail, X valve, double trigger, tuna pak, ULE emag pak, red feedneck. Looks great and shoots great. Picked this up from Going Home and I don't think I have eveb used it myself. I just prefer my mech mag and I never end up using this. It is a blast too shot, especially in an auto or burst mode. Looking for 825 or 850 with programming cable. Has X-Mod 1.7 Sold Badgers:  Additional pics: 2 3 261. Badger Very well used ex rental. Cycles, shoots and holds air great with no leaks. Inner bore of barrel is in decent shape. Has brass barrel in an aluminum sleeve. Serial number is 9502224 and no field rental number. Ultimate rental gun. Looking for 260. Pending (3-19-09) http://www.mcarterbrown.com/gallery/...8/R_262_01.jpg Additional pics: 2 3 262. Badger Looking for 243. Sold  Additional pics: 2 3 263. Badger Very well used ex rental. Cycles, shoots and holds air great with no leaks. Inner bore of barrel is in decent shape. Has brass barrel in an aluminum sleeve. Serial number is 9506285 and field rental number USG 216. Ultimate rental gun. Front nut that is anchored to the back of the breech to hold the barrel assembly onto the body is cracked on one side and needs a weld to fix it. Looking for 226.  Additional pics: 2 3 264. Turbo Valve Badger Another ex rental badger. Difference is that the valve has been massivly hollowed out which I would imagine allows for a lower cycling pressure but I really have no idea and I haven’t tried it on with a lower pressure. Looking for 300  http://www.mcarterbrown.com/gallery/...8/R_265_01.jpg Additional pics: 2 3 265. Phoenix P-15 Looking for 320. Sold  Additional pics: 2 3 266. Phoenix P-17 Excellent shape. Cycles great, shoot excellent with no leaks. All around excellent shape. I just rebuilt reg. Driver edge between lower frame rail and body rail has a few rough spots on lower frame rail. Looking for 300  Additional pics: 2 3 267. Phoenix number P-21 #2 Excellent shape. Looks new. Leaks down the barrel because of a pinched powertube flat seal. Has the lighter engraving. Cycling issue has something to do with the 3 way I believe. Barrel is raw and still a little rough. Looking for 265  Additional pics: 2 3 268. Phoenix Serial number P-71. Good shape, has a few dings on body including a couple near the end of the site rail, front of the lower body rail. Doesn't have brass diffuser in body. Has deeper engraving. Barrel has a bunch of dried paint in the breech. Rebuilt valve/ reg and cycles great with no leaks. Looking for 295.  Additional pics: 2 3 4 269. Sheridan Equalizer This is in my opinion a horrible gun. Condition wise it look beautiful and holds air without leaks if you ignore the bit that escapes at the initial air up but I think that is normal. It cycles fine if you like to feel like you are blasting yourself and everything around you with a fire extinguisher with every trigger pull. Has very tiny scuffs on the exterior driver edge of the asa. Still has the screen on the interior of the ASA. Also has several small minor dings on the VM-68 style feed block and the inside edge also of the finger retaining plate also has some scuffs on the edge. I didn't replace the feed fingers but they look alright with only a little bit of the ice bruise. 3 way seal (which for some reason sheridan made out of the feed finger material looks alright with no bruises. Serial is 895703344 and engraving of the name "EQUALIZER" is still strong. Looking for 75 or best offer.  Airpower:  Additional pics: 2 3 4 270. Air Power Apex Very well used and has the correct Air Power power tube. This was a nelson convert apex barrel kit and back bottle which I added an apex frame I had around onto. Has a cocker ball detent installed on the driver side to prevent double feeding. Needs a stronger valve spring. Cycles decently but vents if pumped back to hard. Strong valve spring will fix it. I can’t get this apex to cycle without farting and I think it is because it is so well used that the pump slot is worn back. Looking for 38. Vectors... Can include an original Air Power Stock with any of these for 50 dollars. http://www.mcarterbrown.com/gallery/...8/R_271_01.jpg Additional pics: 2 3 4 5 271. AP Parts Vector Very bad shape. I will be parting this in my next parts sale if it doesn't sell. Missing the following: Bolt, Sled, Site rail Some screws. Has a few holes that are stripped on the body. Serial is 378. 3way top is stripped on one side. Barrel has a couple ding on feed and shroud is in bad shape. Has vector B or C grip which has bottom line holes but grip has been cut up to allow for left handed grip. Right hand thumb ridge was taken off and some plastic glue crap has been put over it. Looking for 170. Sold http://www.mcarterbrown.com/gallery/...8/R_272_01.jpg Additional pics: 2 3 4 5 6 272. AP Vector Great shape vector B or C. Serial is 556. Sold for 200 plus shipping without the stab  Additional pics: 2 3 4 5 6 7 8 273. AP Vector I think this is a Vector C and not a vector B. Asa has been gutted to make it thurster ready but guts are included. Has female stab, David Wirth grip frame with bottomline holes. Grips didn't fit when I got them so I sanded them down and now they fit great but have slight gap between body and grip. Very study though. Front trigger guard which came with grip frame has pitting like marks which I am assuming are anno flaws. I will replace this with a nicer guard that has less flaws and looks good. Cycles great but has very small leak from 3 way out of blow off holes. Good shape all around but has a few flaws, pitting on trigger guard, end of barrel has some paint like stains, and site rail has some paint stains. Female stab has a large set screw ding on passenger side but functions great. Quick strip pin for asa is rough and kinda a pain to get out. Serial is 1029 Looking for 276 with female stab or 225 without female stab.  Additional pics: 2 3 4 5 6 7 8 9 10 11 12 388. Project Hawaiian Sterling Needs timing adjusted. Pump handle is stripping both on bolt and inside threads, bolt has wear, body has wear. I was told the milling was done by a denist in hawaii. The milling is reminiscent to Carter Sterling milling on the site rail and the side body milling reminds me of fish scales. Has rear quick disconnect, hammer sear is in good shape with no cracks. Grips are stock WGP panels. Doesn't have a barrel but I could add a stock barrel for 13 more. Takes sterling threads. Looking for 87. http://www.mcarterbrown.com/gallery/...8/R_274_01.jpg Additional pics: 2 274. Sovereign 1 Looking for 180 -Sold http://www.mcarterbrown.com/gallery/...8/R_275_01.jpg Additional pics: 2 3 4 5 6 7 8 9 10 275. Sovereign 1 Looking for 116. Sold http://www.mcarterbrown.com/gallery/...8/R_276_01.jpg Additional pics: 2 3 4 276. Green Sovereign Dark green annodizing. Good shape but has seen use and when I got this in it was a mess and needed some work, I tuned it and adjusted every thing and functions good now if you stick a secondary reg after the maxflow. Has wear in many placed but not bad except for on max flow lid. Wear on edge of back block from adusting the rex style adjuster. Ding/ small dent on bottom front passenger side of body. Wear around bolt pin, wear around end of rock. Proteams detent was cut in after anno and was a bad idea since it has to screw into body where air chamber of ram bolt is but does work well and doesn't leak or stick into body to obstruct bolt. Top of three way has some wear but still threads fine. Sear has wear and back block is cut for plastic buffers but is missing one and has small ding where rex adjuster screw has hit back block. Has proteams detent, palmers rock reg, lp plastic hose instead of annoying hardline. Sovereign 2 plastic frame (durable), rex adjuster, fat boy Hogue style grips, trigger height set screw under trigger, and nickel/ chrome trigger shoe. Also includes stock brass ball sizer and ram bolt and collar have very little wear. I tuned this guns and it shoots great but the problems I foresee are needing a new sear eventually which I believe can be from a cocker frame. New tank/ reg setup, obviously. I put a stab on this sovereign and fed the max flow into it with a quick disconnect and it functioned great after with a nice consistent velocity, and no leaks. Serial is 0677. Max flow is early PVI version with date on take from 96 so 13 years old... Perfect for an old evolution cocker. This tank is definitely not in hydro and is so old it will probably fail hydro so don’t expect a tank from this gun that is usable. Looking for 238 with tank Or 225 without it. Sold I can add in a nice shape black male stab for 50.   Additional pics: 2 3 4 5 6 7 8 9 10 11 277. Green Super Stocker Nelson feed Super Stocker with all “lime green” highlights and matching 12 gram changer. Has usual wear from use, and scratch above ball feed detent. Has special long armed ball feed detent which is allen screwed in instead of the usual circular one that loops through the feed. Also has spot for wire detent to keep balls from falling out while changing tubes although detent isn't included for this spot. Has PMI rubbers on it although they don't fit perfectly on the frame but would fit better with a palmers wedge stock or UMB underneath it. 12 gram rat attack changer has some scratches on the bottom. End of barrel has spiral porting. Barrel is 12 inches. Serial number is PP110. Cycles great and shoot great with no leaks. Has Wedgits Looking for 370 Sold for 385 shipped http://www.mcarterbrown.com/gallery/...8/R_278_01.jpg Additional pics: 2 278. Palmers back bottle Typhoon Decent shape but has some flaws, the grip frame has been stripped of paint and the triggger guard has been cut. The nickel in between the tubes under the bolt on the passenger side has a small crack. Has paint stains on the nickel of the barrel. Asa side retaining screw aren't aligned. Has roughly six inches of porting at front of barrel, PMI rubber grips, ram cap, nickel cap on rock screw, nickel trigger shoe and no vertical asa which makes it a nice canidate for a typhoon to hurc conversion. I aired it up in February and it had a small leak in the lower so I rebuilt it with some parts I had around. Degassed it and added some oil and aired it up again and the leak was gone. I rebuilt the ram a few months ago with some spare parts I had since most of the rings in it has liquified from the previous owner. Cycles well with no leaks. Looking for 250  Additional pics: 2 3 4 5 6 7 8 9 10 11 12 279. Sniper 1 Great shape sniper 1. Has one scratch on the passenger sign of the body (see pics). Has all stock parts. Interior of top tube is scratched internally but I don't know from what. Has a spiral scratch. Has sight rail. Pump rod has black paint on it. Serial number is 581. Has battle grips on Sheridan frame and wire stock. Looking for 315. -25 without battle grips -15 without stock.  Additional pics: 2 3 4 5 6 7 8 280. Late style exrental Sniper-1 Used shape Sniper 1 serial number 1087. Has milled aluminum frame, wood grips, wire stock and all stock sniper 1 parts except for barrel and trigger shoe. Barrel is a sniper 1 barrel but must have been from a different gun since it doesn’t line up perfectly. Has Rental 46 engraved on the side. Frame is missing safety. Cycles goods with no leaks and fun to shoot. No detent though. Looking for 200 Sold for 150  Additional pics: 2 281. Sniper 2 Great shape. No detent, doesn't have autococker 3 way arm through vert asa. Has knurled bolt, knurled cocking rod, old school swing frame and stock pump. Excellent shape except for like wear around end of feedneck and back trigger frame screw hole on body is rough but still has all threads and missing paint on the back on either side of swing frame. Has 11 inch stock bull barrel. Cycles great with no leaks and pump has spring. Looking for 155. Serial is 2289. Sold  Additional pics: 2 282. Sniper 2 Good shape but has a few flaws. Rough screw hole on back of grip frame screw on the body, pump rod is pitted and polished a little and feed neck has ding from set screw. Has automag frame that has been converted to swing trigger. Has automag trigger, and sheridan sear. Has 11 inch stock bull barrel. Pump has spring, has black aluminum ball detent and knurled bolt and stainless knurled cocking rod. Serial 16917 and has pull pin. Cycles well with no leaks. Looking for 125.  Additional pics: 2 283. Sniper 2 Good shape 99 cocker. Serial is 43806. Has a few faint paint stains and asa has a few small dings. No beavertail. Has 11 inch stock barrel. Has kapp 45 frame with finger grooves in excellent shape. Has brass trigger shoe and nice pull. Cycles well and shoots great with no leaks. Looking for 140 Sold http://www.mcarterbrown.com/gallery/...8/R_284_01.jpg Additional pics: 2 284. Sniper 2 Looking for 135. Sold (3-25-09)  http://www.mcarterbrown.com/gallery/...8/R_285_01.jpg Additional pics: 2 3 4 5 6 7 8 285. F/X Pro-Teams Autococker Sold for 185 shipped.  Additional pics: 2 3 4 5 6 286. Old School Autococker Great shape and cycles well. Has hammer pin set screw hole, top hammer pin hole, and feed is notched. Great shape besides those problems. Serial is 24941. Has all palmer pneumatics. Body is in great shape besides those holes, the frame and pneumatics also look great and shroud is cut to fit down around vert asa and has hole for rock to stick out of. Looking for 105. http://www.mcarterbrown.com/gallery/...8/R_287_01.jpg Additional pics: 2 3 4 5 6 7 8 287. Autococker Looking for 115 - sold http://www.mcarterbrown.com/gallery/...8/R_288_01.jpg Additional pics: 2 3 4 5 6 7 8 288. 2K Autococker Looking for 106. Sold (3-17-09)  Additional pics: 2 3 4 5 6 7 8 9 10 289. Kapp Cocker Cocker Good shape and all stock but has flaws from use. Has minor tiny dings on body. Front of bolt has wear, back of cocking block wear it hits the rubber stopper of the cocking rod has wear. Worst of all chrome pneumatics are flaking. 3 way looks good with little to no flaking, reg has few small spots, and ram has a few big spots. Nice blue to green fade. Very nice shooter! Shoots just like the Kapp cockers my friends bough from KAPP factory store 6 years back. This gun was bought from their Santa Rosa Store and has had one owner before me. When I got this cocker it had a few small leaks so I replaced a few orings in the ram and the orings in the 3 way and now it shoot great with no leaks. Has Hogue palm swells. Looking for 300 or 325 with 12 inch great shape stock book stick. -10 without palmswells.  Additional pics: 2 3 4 5 6 7 290. Sandridge F-5 Tiny Tornado Cocker I think I will keep this…  Additional pics: 2 3 4 291. WGP Autotrracer Looking for 180. Sold  Additional pics: 2 3 4 292. WGP project autonelson kit WGP autonelson kit with untested pneumatics. Excellent shape, includes all specific parts except for pump arm linkage. Pneumatics look good but are untested. Looking for 84  Additional pics: 2 3 4 293. WGP project autonelson kit WGP autonelson kit with untested pneumatics. Excellent shape and includes all specific parts except for pump arm linkage. Includes plastic WGP trigger shoe Pneumatics look good but are untested. Looking for 87  Additional pics: 2 3 4 294. WGP project autonelson kit WGP autonelson kit with untested pneumatics. Very good shape and includes all specific parts except for pump arm linkage. Pneumatics look good but are untested. Looking for 85  Additional pics: 2 3 295. WGP project autonelson kit WGP autonelson kit without pneumatics. Very good shape, includes all specific parts except for pump arm linkage. Looking for 73  Additional pics: 2 3 4 296. WGP project autonelson kit WGP autonelson kit without pneumatics. Very good shape, includes all specific parts except for pump arm linkage. Includes plastic WGP trigger shoe Pneumatics look good but are untested. Looking for 75  Misc semis: http://www.mcarterbrown.com/gallery/...8/R_297_01.jpg Additional pics: 2 297. Super Nova Looking for 235 Sold http://www.mcarterbrown.com/gallery/...8/R_298_01.jpg Additional pics: 2 3 4 5 298. Side kick Semi Sold for 65 http://www.mcarterbrown.com/gallery/...8/R_299_01.jpg Additional pics: 2 299. Project Shocker V Sport Traded http://www.mcarterbrown.com/gallery/...8/R_300_01.jpg Additional pics: 2 300. Shocker 4x4 Looking for 135. Sold Trades: Here is a partial list of a few of the things I am looking for right now: Lapco parts, ghost trigger frame, valve body, skeleton sight rails, ect… Idema SMG 60 Vest Any Idema Bag Idema Mask (ICS mask) Sniper Imp parts ( I need another bolt) Sniper 1 parts and Sniper 1 square asas WGP Commando Parts and WGP Ranger Parts Boston Reflex cocker parts VM bullpup trigger guard Carter parts, Carter Guns, or Carterized guns, pump or semis Craig Version Blazer PSI Brass Stock Tube Hornet Long Barreled Puma Splatoon (Stock class version) Scorpion Autoloader CMI LS-2000 CMI Mini Hog Buzzard pump arm Darkstar electro pneumatic Nova style Last edited by bacci paintball; 07-20-2009 at 01:53 PM. |
|  |
|
03-16-2009, 10:20 PM
| #5 (permalink) | |
| MCB Member Join Date: Jul 2007 Location: San Diego CA |
i feel dizzy....
__________________ Quote:
| |
|
| |
|
03-16-2009, 10:21 PM
| #6 (permalink) |
| Inch of Gold  Join Date: May 2007 Location: Denver       |
WTF man, I saw Epics and nearly soiled myself, and they're already gone 3 hours later?
__________________ My Feedback |
|
| |
|
03-16-2009, 10:22 PM
| #7 (permalink) |
| www.tituspb.com  Join Date: Mar 2006 Location: The Group W Bench |
33. 12 inch Lapco bigshot - has large scrapes on the front +5 39. 14 inch J and J brass with light wear on breech and tip. Has striaght rifling, has T slot +8 Just PM me with a total
__________________  FeedbackDealer for APP, CCI, Nelson, Leland, Valken, Tippmann, Procaps, etc  Please donate to make a difference in my fathers life Willing to be a 3rd party for shipments to Canada anywhere in the world just PM me. Buy a Celanis Paintball Patch for a good cause |
|
| |
|
03-16-2009, 10:25 PM
| #8 (permalink) |
| Stock Class Aficionado  Join Date: Mar 2007 Location: Vancouver, BC, Canada |
I am torn between 97. PMI 1 DF and 288. 2K Autococker, I will PM you ASAP. EDIT: I will pass. I cannot get into more whoring while the dollar exchange is so bad. Last edited by idkfa; 03-16-2009 at 11:01 PM. |
|
| |
|
03-16-2009, 10:29 PM
| #9 (permalink) |
| Seasoned Member  Join Date: Feb 2007 Location: Cheyenne, Wyoming |
Man, I sure do love it when you have a sale!! PM'ing you about a couple of guns...
__________________ "America is all about speed. Hot, nasty, badass speed." -Eleanor Roosevelt, 1936 Gig 'Em Aggies!! MCarterBrown Feedback Automags.org Feedback PBNation Feedback |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
