VM's, 68 Special, pumps etc.

DarkNinja · 06-29-2009, 11:19 PM

I feel the need to consolidate my collection a bit. Every time I look under something I find another and I still haven't fielded some of the guns I have had laying here for over 3 years now. Shipping is not included but we can work something out. All prices are OBO unless stated. Sold items will be moved to the bottom.

Up next is a friends VM, its pretty stock but should work. I know that the side of the body is drilled and tapped for 1/8th npt so you could put a second asa onto this and run dual tanks or plug the front and run bottomline/backbottle. Or plug/gauge the side and use the front ASA. Its been used but so have all good VM's. Hes looking for $70 OBO. I will look it over before it goes out.

I bought this Hornet on a whim, I have never used it in a game to this day. Its in great cosmetic shape and it seals and fires. I have noticed that the pump rods need to be tweaked when I change barrels or it doesn't always cock right, you have to pull the pump forward till the trigger clicks before it will shoot. This is not a real issue but its the biggest flaw I can find on this one. I am looking for $65 OBO

Next up is an OLD Trracer, serial #2759. It has the non slotted field strip screws on the frame and this spiral ported barrel that appears like a very nicely modded stock barrel. Its old enough that its from before the ball detent spring and anti double feed were standard so it does NOT have those, which I think is pretty cool. Standard lonestar frame including the trap door and adjustable velocity bolt. It airs up with no leaks and while I don't have a chrono I can safely say this is shooting over 280 today. I will see if I can find some matching slotless pump arm screws to go with this thing. Its in pretty good shape with some wear on the pump which appears to be from another Trracer. I'm not really set on selling this one so I will ask $80 OBO on this.

Next is my Trracer. I found this in my house years ago, apparently a friend of mine lost half the parts and then lost it at my place. I found it one day and asked him what he wanted to do with it and he said I could have it since he didn't want to put money into it with his newer gear so I started building. At this point the only parts that are on it that I started with are the frame and the body, everything else got replaced. Long powertube, blackmagic cup seal(I think), 45 frame, bottom line, etc. There aren't many options out there for a Trracer/Maverick that this doesn't have. I also chopped a Spyder TL sight rail to put on it, it fits perfectly once the beaver tail is cut off. Its currently not shooting fast enough to actually break paint on someone more than 15 feet from you so this will have no price for now since that's pending repairs.

The first of the M98's. This is one I picked up just so I could have a Tippmann. I now own a Pro-lite and a 68 Special so I no longer need it just to have a Tippmann. Its in decent shape and shoots as well as any M98 does. $65 OBO

This is my friends 98, I have no idea why he has it, I just know he doesn't have a use for it now and so its up for grabs. Price will be up as soon as I talk to him later tonight. Update: This is now mine, it needs a new valve thats on its way to me now. I would like 55 for this one once I fix it. Its got some wear and someone tried to superglue the feed neck on instead of replacing the pins....its been cleaned but there is some evidence of this.

Splatmaster, the sear doesn't grab so it won't stay cocked. Body is in good shape but the figure 8 is missing. Ex rental from Cobra Command in SE PA. Has "RENTAL" stamped on the back near the push button and a serial on the side in permanent marker. I don't know what this is worth so lets say $25

This cocker body I picked up recently and am no longer proceeding with the project I had planned for it. The frame on it is NOT FOR SALE but the reg may go with it for the right price. Its a 2k body and has complete intermals and they all look to be in order however I have not had a chance to air it up since I am missing the front end still. I would like $45 for it alone, $60 with the reg, I am open to offers. I have a new front block on order and will be gassing it up hopefully later this week, if all works I may be selling this as a complete unit.

I have had this polish vert feed RT Pro/Emag body. The feed necks been cut down and a different feed has been installed, it has o-rings to grip the hopper. Its in decent shape but could use a polish, the feed neck has some scuffs. I picked up a ULE and this was not needed anymore so here it is. How about $55? as a complete marker minus asa I would like $110 OBO.

A VM68 body, its got some scrapes and scratches like almost all do. That's just a sign that someone loved this in the years since its creation. How about $30?

I also have 2 Trracer barrels for sale, one is a 16" Smart Parts All American barrel, this thing shoots darts. I spent some money on this and would like to get it back. These things are hard to find, at least I can't find any more in Trracer thread. This is SOLD. I also have a 14" JJ Ceramic barrel that has never seen a game but was used over the chono and at the range for comparison against my SP AA's and stock barrels. Most of the wear and tear is from storage. I spent $30 on this and would like to get $20.

JJ IS PENDING

Everything is OBO, I have no idea what some of this stuff goes for these days but they should be in the ballpark.

If you have any questions post, pm or telegraph works. I can get pictures of of anything you specifically want to see.

As for trades that I'm interested in, they are as follows:

Carters, I'm interested in any model and any year, 'nuff said
Ghosts, new, old doesn't matter I want them. Would like parts for old ghosts too.
Eclipse stuff, mag body kits(green/black/silver preferred), cocker bodies, STERLINGS! etc...
Xvalve, black or red. May look at an older steel Retro valve too.
Aluminum site rails & forgrip mounts for old RT's, would like these in black. I'm looking for the aluminum ones.
Sterling parts, sidetap valve is a big one.
Rain covers
A cheap phantom, removable barrel preferred
Firearms parts, specifically 1911 and AR parts.
If your in PA and would like to trade for longarms pm me, I may be interested. I am currently looking for an excellent bore M39 mosin nagant. I have my LTCF and am not prohibited, prefer bill of sale vs ffl.
I no longer need a chrono, I have since purchased one

Thanks.

Sold items:

SOLD

AA IS SOLD

VM-onster · 06-30-2009, 12:18 AM

i will give you 20 for the tracer barrel bro, pm details...thanks

DarkNinja · 07-03-2009, 12:03 AM

2 Items pending!

ezekiel2517lim · 07-03-2009, 01:35 AM

Pm'd

DarkNinja · 07-03-2009, 07:40 PM

Trracer All American barrel is SOLD. I am working on a mag or 2 to add to this, one may be using the Emag body above, the other will be a classic body or black Minimag body. I only shoot my mag, I never use the others so its time to whore them out to someone else. I would love interesting trades, mostly older gear or Eclipse stuff. Really looking for an Xvalve to go on my mag too.

DarkNinja · 07-25-2009, 06:21 PM

Up from page 3......

Thread updated, still have to post pics of the mag but I have one if anyone's interested.

I went from clearing out the house to fun raising for my new snake enclosure, which has spun wildly out of budget.

albertsboblong · 10-31-2009, 02:43 AM

will that black barrel fit a bob long intimidator? if so pm me the price+shipping=??? thx

worr8529 · 11-12-2009, 12:43 AM

need the JJ barrel, pm comming!

DarkNinja · 11-14-2009, 01:36 PM

Sorry guys, haven't been on here much in the last month or 2.

The barrel is Trracer/Maverick threaded so it will not fit an Intimidator. I will pm you Worr later.

worr8529 · 11-17-2009, 08:23 AM

thanks, I need that J&J!!

06-29-2009, 11:19 PM	#1 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	VM's, 68 Special, pumps etc. I feel the need to consolidate my collection a bit. Every time I look under something I find another and I still haven't fielded some of the guns I have had laying here for over 3 years now. Shipping is not included but we can work something out. All prices are OBO unless stated. Sold items will be moved to the bottom. Up next is a friends VM, its pretty stock but should work. I know that the side of the body is drilled and tapped for 1/8th npt so you could put a second asa onto this and run dual tanks or plug the front and run bottomline/backbottle. Or plug/gauge the side and use the front ASA. Its been used but so have all good VM's. Hes looking for $70 OBO. I will look it over before it goes out. I bought this Hornet on a whim, I have never used it in a game to this day. Its in great cosmetic shape and it seals and fires. I have noticed that the pump rods need to be tweaked when I change barrels or it doesn't always cock right, you have to pull the pump forward till the trigger clicks before it will shoot. This is not a real issue but its the biggest flaw I can find on this one. I am looking for $65 OBO Next up is an OLD Trracer, serial #2759. It has the non slotted field strip screws on the frame and this spiral ported barrel that appears like a very nicely modded stock barrel. Its old enough that its from before the ball detent spring and anti double feed were standard so it does NOT have those, which I think is pretty cool. Standard lonestar frame including the trap door and adjustable velocity bolt. It airs up with no leaks and while I don't have a chrono I can safely say this is shooting over 280 today. I will see if I can find some matching slotless pump arm screws to go with this thing. Its in pretty good shape with some wear on the pump which appears to be from another Trracer. I'm not really set on selling this one so I will ask $80 OBO on this. Next is my Trracer. I found this in my house years ago, apparently a friend of mine lost half the parts and then lost it at my place. I found it one day and asked him what he wanted to do with it and he said I could have it since he didn't want to put money into it with his newer gear so I started building. At this point the only parts that are on it that I started with are the frame and the body, everything else got replaced. Long powertube, blackmagic cup seal(I think), 45 frame, bottom line, etc. There aren't many options out there for a Trracer/Maverick that this doesn't have. I also chopped a Spyder TL sight rail to put on it, it fits perfectly once the beaver tail is cut off. Its currently not shooting fast enough to actually break paint on someone more than 15 feet from you so this will have no price for now since that's pending repairs. The first of the M98's. This is one I picked up just so I could have a Tippmann. I now own a Pro-lite and a 68 Special so I no longer need it just to have a Tippmann. Its in decent shape and shoots as well as any M98 does. $65 OBO This is my friends 98, I have no idea why he has it, I just know he doesn't have a use for it now and so its up for grabs. Price will be up as soon as I talk to him later tonight. Update: This is now mine, it needs a new valve thats on its way to me now. I would like 55 for this one once I fix it. Its got some wear and someone tried to superglue the feed neck on instead of replacing the pins....its been cleaned but there is some evidence of this. Splatmaster, the sear doesn't grab so it won't stay cocked. Body is in good shape but the figure 8 is missing. Ex rental from Cobra Command in SE PA. Has "RENTAL" stamped on the back near the push button and a serial on the side in permanent marker. I don't know what this is worth so lets say $25 This cocker body I picked up recently and am no longer proceeding with the project I had planned for it. The frame on it is NOT FOR SALE but the reg may go with it for the right price. Its a 2k body and has complete intermals and they all look to be in order however I have not had a chance to air it up since I am missing the front end still. I would like $45 for it alone, $60 with the reg, I am open to offers. I have a new front block on order and will be gassing it up hopefully later this week, if all works I may be selling this as a complete unit. I have had this polish vert feed RT Pro/Emag body. The feed necks been cut down and a different feed has been installed, it has o-rings to grip the hopper. Its in decent shape but could use a polish, the feed neck has some scuffs. I picked up a ULE and this was not needed anymore so here it is. How about $55? as a complete marker minus asa I would like $110 OBO. A VM68 body, its got some scrapes and scratches like almost all do. That's just a sign that someone loved this in the years since its creation. How about $30? I also have 2 Trracer barrels for sale, one is a 16" Smart Parts All American barrel, this thing shoots darts. I spent some money on this and would like to get it back. These things are hard to find, at least I can't find any more in Trracer thread. This is SOLD. I also have a 14" JJ Ceramic barrel that has never seen a game but was used over the chono and at the range for comparison against my SP AA's and stock barrels. Most of the wear and tear is from storage. I spent $30 on this and would like to get $20. JJ IS PENDING Everything is OBO, I have no idea what some of this stuff goes for these days but they should be in the ballpark. If you have any questions post, pm or telegraph works. I can get pictures of of anything you specifically want to see. As for trades that I'm interested in, they are as follows: Carters, I'm interested in any model and any year, 'nuff said Ghosts, new, old doesn't matter I want them. Would like parts for old ghosts too. Eclipse stuff, mag body kits(green/black/silver preferred), cocker bodies, STERLINGS! etc... Xvalve, black or red. May look at an older steel Retro valve too. Aluminum site rails & forgrip mounts for old RT's, would like these in black. I'm looking for the aluminum ones. Sterling parts, sidetap valve is a big one. Rain covers A cheap phantom, removable barrel preferred Firearms parts, specifically 1911 and AR parts. If your in PA and would like to trade for longarms pm me, I may be interested. I am currently looking for an excellent bore M39 mosin nagant. I have my LTCF and am not prohibited, prefer bill of sale vs ffl. I no longer need a chrono, I have since purchased one Thanks. Sold items: SOLD AA IS SOLD __________________ Everyone says "Well maybe i'll make a difference", Thinking they've got plenty of time But you're squeezed a little tighter everyday Finished before you can commit a crime Last edited by DarkNinja; 02-07-2010 at 11:36 PM. Reason: Fixed the pictures

06-30-2009, 12:18 AM	#2 (permalink)
VM-onster Seasoned Member Join Date: Dec 2007 Location: WestCoast	i will give you 20 for the tracer barrel bro, pm details...thanks __________________

07-03-2009, 12:03 AM	#3 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	2 Items pending! __________________ Everyone says "Well maybe i'll make a difference", Thinking they've got plenty of time But you're squeezed a little tighter everyday Finished before you can commit a crime

07-03-2009, 01:35 AM	#4 (permalink)
ezekiel2517lim Active Member Join Date: Sep 2008 Location: Portland, ME	Pm'd __________________ RIT Paintball #17 If you live in Maine and play paintball, come here: http://www.mainepb.com

07-03-2009, 07:40 PM	#5 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	Trracer All American barrel is SOLD. I am working on a mag or 2 to add to this, one may be using the Emag body above, the other will be a classic body or black Minimag body. I only shoot my mag, I never use the others so its time to whore them out to someone else. I would love interesting trades, mostly older gear or Eclipse stuff. Really looking for an Xvalve to go on my mag too. __________________ Everyone says "Well maybe i'll make a difference", Thinking they've got plenty of time But you're squeezed a little tighter everyday Finished before you can commit a crime

07-25-2009, 06:21 PM	#6 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	Up from page 3...... Thread updated, still have to post pics of the mag but I have one if anyone's interested. I went from clearing out the house to fun raising for my new snake enclosure, which has spun wildly out of budget. __________________ Everyone says "Well maybe i'll make a difference", Thinking they've got plenty of time But you're squeezed a little tighter everyday Finished before you can commit a crime

10-31-2009, 02:43 AM	#7 (permalink)
albertsboblong Newbie Join Date: Oct 2009	will that black barrel fit a bob long intimidator? if so pm me the price+shipping=??? thx

11-12-2009, 12:43 AM	#8 (permalink)
worr8529 Newbie Join Date: Nov 2009	need the JJ barrel, pm comming!

11-14-2009, 01:36 PM	#9 (permalink)
DarkNinja MCB Member Join Date: Apr 2006	Sorry guys, haven't been on here much in the last month or 2. The barrel is Trracer/Maverick threaded so it will not fit an Intimidator. I will pm you Worr later. __________________ Everyone says "Well maybe i'll make a difference", Thinking they've got plenty of time But you're squeezed a little tighter everyday Finished before you can commit a crime

11-17-2009, 08:23 AM	#10 (permalink)
worr8529 Newbie Join Date: Nov 2009	thanks, I need that J&J!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search