FS: Custom Splatmaster Upgrade Kits (velocity adjuster, etc)

C-Mac · 01-23-2007, 02:10 AM

I am selling Splatmaster upgrade kits, custom made by K&P Customs. The kits include:

Aluminum slider rail

Aluminum plunger with velocity adjuster

Aluminum barrel (originally a used stock Tracer barrel)

$115 shipped for the upgrade kit.
$150 shipped for a kit and a splatmaster in good condition, tested to hold air and dry fire.

For interested buyers, I will take pictures of the exact item you will receive. To my knowledge, this is your only opportunity to get custom parts of this sort at this time and with a waiting period of only a few days. I have Splatmasters with either the normal body or the side-cocking versions.

Please e-mail me if interested: colinmcintyre <at> gmail.com
Although I may check this forum, order of preference will be determined by order of e-mail. No trades, please.

-Colin McIntyre

sdawg · 01-23-2007, 02:15 AM

Quote:

Originally Posted by C-Mac

$115 shipped for the upgrade kit.
$150 shipped for a kit and a splatmaster in good condition, tested to hold air and dry fire.

BUT, fair price for custom-made parts.

Ivan · 01-23-2007, 09:11 AM

Whats a side cocking splatmaster look like?

Azzy · 01-23-2007, 12:05 PM

same as a normal splatmaster, but with a slot down one side that has a bit of plastic sticking out, supposedly so you could use your thumb to re-cock. Only issue was, only 3 people have thumbs that strong to do it on that tab.

The older ones (I have a 3 digit SN one) are made of a higher quality composite, much more glass impregnated material than plastic. (think Glock)

Cunha · 01-23-2007, 07:38 PM

I dont know why these seem so so so cool to me :P

cockerpunk · 01-23-2007, 07:49 PM

good i want one!

mmm, thats alot of cash tho

price for just the barrel and velocity part?

DarkNinja · 01-23-2007, 09:04 PM

Quote:

Originally Posted by Azzy

same as a normal splatmaster, but with a slot down one side that has a bit of plastic sticking out, supposedly so you could use your thumb to re-cock. Only issue was, only 3 people have thumbs that strong to do it on that tab.

I can re-cock my normal splatties with my thumbs, its just a bit of a stretch to do it. I do wear XL gloves so my hands aren't small.

C-Mac · 01-24-2007, 12:47 PM

Ivan - I'll try to get a picture of one of the side-cocking ones up later today

Cockerpunk - I'd rather not part out the sets.

C-Mac · 01-25-2007, 02:20 PM

Roland and Jake, isn't your business better dealt with elsewhere?

kidneythief · 01-25-2007, 05:28 PM

No harm intended buddy...I was just commenting. Good luck on the sale.

Posts deleted.

-Jake

01-23-2007, 02:10 AM	#1 (permalink)
C-Mac Rec Poster Join Date: Jan 2007 Location: Ann Arbor, MI	FS: Custom Splatmaster Upgrade Kits (velocity adjuster, etc) I am selling Splatmaster upgrade kits, custom made by K&P Customs. The kits include: Aluminum slider rail Aluminum plunger with velocity adjuster Aluminum barrel (originally a used stock Tracer barrel) $115 shipped for the upgrade kit. $150 shipped for a kit and a splatmaster in good condition, tested to hold air and dry fire. For interested buyers, I will take pictures of the exact item you will receive. To my knowledge, this is your only opportunity to get custom parts of this sort at this time and with a waiting period of only a few days. I have Splatmasters with either the normal body or the side-cocking versions. Please e-mail me if interested: colinmcintyre <at> gmail.com Although I may check this forum, order of preference will be determined by order of e-mail. No trades, please. -Colin McIntyre

01-23-2007, 12:05 PM	#4 (permalink)
Azzy Mod-O-Rator Join Date: Mar 2006 Location: Finleyville, PA	same as a normal splatmaster, but with a slot down one side that has a bit of plastic sticking out, supposedly so you could use your thumb to re-cock. Only issue was, only 3 people have thumbs that strong to do it on that tab. The older ones (I have a 3 digit SN one) are made of a higher quality composite, much more glass impregnated material than plastic. (think Glock) __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me. I want to take the calculated risk; to dream and to build, to fail and to succeed. I refuse to barter incentive for a dole. I prefer the challenges of life to the guaranteed existence; the thrill of fulfillment to the stale calm of utopia. I will not trade freedom for beneficence nor my dignity for a handout. I will never cower before any master nor bend to any threat. It is my heritage to stand erect, proud and unafraid; to think and act for myself, enjoy the benefit of my creations and to face the world boldly and say, “This I have done.” - Dean Alfange

01-23-2007, 07:49 PM	#6 (permalink)
cockerpunk MCB Member Join Date: Jul 2006	good i want one! mmm, thats alot of cash tho price for just the barrel and velocity part? __________________ the ultimate truth in paintball is that the interaction between the gun and the player is far and away the largest factor in accuracy, consistency, and reliability. >>PAINTBALL SCIENCE!<< "Originally posted by Garbageman705: Arguing with Cockerpunk is like fighting a T-Rex. Your going to get your *** kicked."

01-25-2007, 05:28 PM	#10 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!!	No harm intended buddy...I was just commenting. Good luck on the sale. Posts deleted. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) MCB Moderator Kidney Machine

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-23-2007, 09:11 AM	#3 (permalink)
Ivan Geochronologist! Join Date: Oct 2006 Location: London, On.	Whats a side cocking splatmaster look like?

01-23-2007, 07:38 PM	#5 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA	I dont know why these seem so so so cool to me :P

01-24-2007, 12:47 PM	#8 (permalink)
C-Mac Rec Poster Join Date: Jan 2007 Location: Ann Arbor, MI	Ivan - I'll try to get a picture of one of the side-cocking ones up later today Cockerpunk - I'd rather not part out the sets.

01-25-2007, 02:20 PM	#9 (permalink)
C-Mac Rec Poster Join Date: Jan 2007 Location: Ann Arbor, MI	Roland and Jake, isn't your business better dealt with elsewhere?