Redux pierce-pin assembly: cut threads & LIQUID seal - Page 2

CJOttawa · 05-19-2010, 01:43 PM

Quote:

Originally Posted by DSA

CJ your such a failure

I'm such a failure, I fail at failing.

DSA · 05-19-2010, 07:43 PM

I broke into mOngos gear bag and stole his PolyGrip it seems to work fine. It was right there between the Geritol and the Viagra!

splattttttt · 05-23-2010, 12:40 AM

How about those glue sticks used with glue guns? Bet that would work perfect.

DSA · 05-24-2010, 02:48 PM

I used to wonder the same thing cept my idea was to dip my 12gms in the hot glyestick goo so if I lost the seal it would be on every 12gm

mOngo · 05-24-2010, 08:22 PM

Hey Eric.... I resemble that.

splattttttt · 05-24-2010, 09:23 PM

Quote:

Originally Posted by mOngo

Hey Eric.... I resemble that.

What? A twelvee with glyestick goo?

CJOttawa · 05-24-2010, 11:16 PM

Quote:

Originally Posted by splattttttt

What? A twelvee with glyestick goo?

My threads never go in the direction I think they will with you guys around.

splattttttt · 05-24-2010, 11:23 PM

Quote:

Originally Posted by cjottawa

I'm such a failure, I fail at failing.

Not true.

CJOttawa · 07-23-2010, 11:43 PM

I tried a new approach: a bit of JB-Weld behind a standard CCI pierce-pin seal.

Acid test: I dumped a FULL 12-gram into the pierce pin assembly while installed in the Redux.

No blown out seal!

I'll report after testing this during some games.

splattttttt · 07-24-2010, 12:52 AM

Quote:

Originally Posted by cjottawa

I tried a new approach: a bit of JB-Weld behind a standard CCI pierce-pin seal.

Acid test: I dumped a FULL 12-gram into the pierce pin assembly while installed in the Redux.

No blown out seal!

I'll report after testing this during some games.

Suck on that Eric.
Better than Goo CJ?

05-23-2010, 12:40 AM	#13 (permalink)
splattttttt kittens make me grin d : Join Date: Apr 2006 Location: Bean Town, U.S.A.	How about those glue sticks used with glue guns? Bet that would work perfect. __________________ My Feed Back my MCB album and my youtube channel ((( watch this PUMP DOCUMENTARY )))

05-24-2010, 08:22 PM	#15 (permalink)
mOngo MCB Member Join Date: Apr 2006 Location: Los Angeles, California	Mongo's gearbag.......... Hey Eric.... I resemble that. __________________

07-23-2010, 11:43 PM	#19 (permalink)
CJOttawa Tempus fugit. Join Date: Dec 2006 Location: Canada's National Capital	Update I tried a new approach: a bit of JB-Weld behind a standard CCI pierce-pin seal. Acid test: I dumped a FULL 12-gram into the pierce pin assembly while installed in the Redux. No blown out seal! I'll report after testing this during some games.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search