Paintball

[weekendballer]

chaos, my cip and redux have different length CO2 plugs. so one made to the redux dimensions wouldn't work in a box gun.

[Chaos]

I've tested it against PB Weasel's Redux,yes the plugs are different lengths (Threads are the same thought the CIP frame has less threads),but,That can be worked around,so no worries I still want one

[CJOttawa]

Originally Posted by weekendballer

chaos, my cip and redux have different length CO2 plugs. so one made to the redux dimensions wouldn't work in a box gun.

My understanding was the CIP plug had a large, adjustable grub screw to change the effective plug length. I'm basing that on this photo of the Boxgun and Redux plugs which appear to be the same length overall:



The Redux plug should work with fewer threads which suggests to me a CA adaptor for a Redux would work in the CIP Superstock (Boxgun).

[Chaos]

That is not a CIP Boxgun plug in that pic that I am aware...The CIP frames I have seen close up have no grub screw at all.

I'll get with PB Weasel next time and take some pics of my plug vs. his Redux plug

[sniper42]

Either way, the design can easily be adapted for length. It is just a matter of how long i turn the piece.

[DSA]

Originally Posted by Chaos

That is not a CIP Boxgun plug in that pic that I am aware...The CIP frames I have seen close up have no grub screw at all.

I'll get with PB Weasel next time and take some pics of my plug vs. his Redux plug

Agreed here is a comparison photo of all three: Redux, Redux Box Gun, and CIP

[sniper42]

Are all the threads the same on the three plugs though?

[Chaos]

I know the thread pitch on the Redux and the CIP frame I have is the same,I've threaded PB Weasel's Redux plug into my gun without any issues....just has more threads so it'll only go in so far