Show us your Gargoyle! - Page 3

ironchef97 · 06-25-2010, 10:30 PM

Take the wingnut out and the cradle slides apart, allowing you to stow the gun+stock separately or more compactly.

adam45 · 06-25-2010, 11:07 PM

Gargoyle #000001

Awesome!

I got a second barrel and freak bored it. I recently added the T stock.

ironchef97 · 06-25-2010, 11:15 PM

Serial # 1 exists!!

splattttttt · 06-25-2010, 11:55 PM

Quote:

Originally Posted by ironchef97

Serial # 1 exists!!

Good, not you can stop chasin #23 lol

ironchef97 · 06-26-2010, 12:18 AM

#1 may be first, but #23 will always hold a special place in my heart. Just Kidding.

splattttttt · 06-26-2010, 12:39 AM

Quote:

Originally Posted by ironchef97

#1 may be first, but #23 will always hold a special place in my heart. Just Kidding.

Was the one that got away.

Greenmtnphantom · 06-26-2010, 09:37 AM

Quote:

Originally Posted by adam45

Gargoyle #000001

Awesome!

I got a second barrel and freak bored it. I recently added the T stock.

http://i6.photobucket.com/albums/y22...s/IMG_1901.jpg

How is the bored barrel working for you? With the thread adaptor and all?

Greenmtnphantom · 06-26-2010, 10:17 AM

Quote:

Originally Posted by ironchef97

Take the wingnut out and the cradle slides apart, allowing you to stow the gun+stock separately or more compactly.

Now I'm the confused one. I thought thats what the pin in the side was for of do you need to loosen the nut and pull the pin?

Angelballer · 06-26-2010, 10:59 AM

It looks to me to a be a locating fixture to help align the two holes for the pull pin. Otherwise you have to push the stock back and forth until they align. Push the stock all the way up and then pull back so the wingnut is resting against the front of the mount. Insert pull pin and it is done. Clever but I'd rather have a nylock nut so once set it doesn't move.

Raynman · 06-26-2010, 04:25 PM

On the NW's the wingnut basically tightens the play in the pin. You obviously can't have a 13 inch stock be held without rattle using a simple pin but when you use the wingnuts to put pressure, it tightens it nicely.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-25-2010, 10:30 PM	#21 (permalink)
ironchef97 . Join Date: Sep 2008 Location: SD	Take the wingnut out and the cradle slides apart, allowing you to stow the gun+stock separately or more compactly.

06-25-2010, 11:15 PM	#23 (permalink)
ironchef97 . Join Date: Sep 2008 Location: SD	Serial # 1 exists!!

06-26-2010, 12:18 AM	#25 (permalink)
ironchef97 . Join Date: Sep 2008 Location: SD	#1 may be first, but #23 will always hold a special place in my heart. Just Kidding.

06-26-2010, 10:59 AM	#29 (permalink)
Angelballer Seasoned Member Join Date: Jan 2009	It looks to me to a be a locating fixture to help align the two holes for the pull pin. Otherwise you have to push the stock back and forth until they align. Push the stock all the way up and then pull back so the wingnut is resting against the front of the mount. Insert pull pin and it is done. Clever but I'd rather have a nylock nut so once set it doesn't move.

06-26-2010, 04:25 PM	#30 (permalink)
Raynman MCB Member Join Date: Apr 2006 Location: Durham, NC	On the NW's the wingnut basically tightens the play in the pin. You obviously can't have a 13 inch stock be held without rattle using a simple pin but when you use the wingnuts to put pressure, it tightens it nicely.