mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   RTR (http://www.mcarterbrown.com/forums/rtr/)
-   -   RTR Under Cocker Pump (http://www.mcarterbrown.com/forums/rtr/205826-rtr-under-cocker-pump.html)

RTR 06-18-2012 07:50 PM

RTR Under Cocker Pump
 
Let me explain:

You mount the small block to your Gun just like you would any other pump. And actually you could just use this small block for a pump if you wanted to.

However, the purpose of this small block is to be able to mount the actual pump to it. This way, anyone who is creative with a Dremel and a drill can make a pocket in a hockey puck, custom pump, miscellaneous item and make it there pump on the little block. Make sense?

http://www.mcarterbrown.com/gallery/...er_Cocker3.JPG

And here are the pumps that will be of a Matte Finish.

http://www.mcarterbrown.com/gallery/...er_Cocker1.JPG
http://www.mcarterbrown.com/gallery/...er_Cocker2.JPG

And here are a batch to show you where the screws will go to hold your pump on.
http://www.mcarterbrown.com/gallery/.../Underpump.JPG

And here is for size comparison:

http://www.mcarterbrown.com/gallery/...Underpump5.JPG


This is a short run. Some of the small blocks will be available by themselves but I am still working on a few things to see how I am going to divide them up. All will be either Gloss Black or Matte Black with Raw available on request. I will be asking for people who want it Raw first so I know how many to hold off sending to Ano.


Hope you guys like these and it should not be to awful long before they are ready.

Now the tough part: Cost will be $75 which includes both pieces.


I am not taking orders at this time but should be all set to in about two weeks or less. If you want a RAW UnderPump please PM or email me.

.

Marathon 06-18-2012 08:09 PM

are these going to compatable with any non phantom based guns? I would be interested in one for a CCM S6...just a thought.

RTR 06-18-2012 08:10 PM

Quote:

Originally Posted by Marathon (Post 2383584)
are these going to compatable with any non phantom based guns? I would be interested in one for a CCM S6...just a thought.

These are for Gargoyles and Phantoms at the moment.

There is room for more with this concept. I am looking at that as well.

Donut SD 06-18-2012 08:17 PM

Nice!!! I want!

EDIT: for garg owners, any chance to get them annoed to match our current colorway? I'm perfectly fine with the matte finish you're showing but am partial to the option of color matching.

RTR 06-18-2012 08:36 PM

Quote:

Originally Posted by Donut SD (Post 2383591)
Nice!!! I want!

EDIT: for garg owners, any chance to get them annoed to match our current colorway? I'm perfectly fine with the matte finish you're showing but am partial to the option of color matching.


Unfortunately I cannot color match. I would love to but there are to many variables at play to guaranty a match and also onezy twozy Ano costs would just be to high.

Sorry bud.

Donut SD 06-18-2012 08:39 PM

Quote:

Originally Posted by RTR (Post 2383617)
Unfortunately I cannot color match. I would love to but there are to many variables at play to guaranty a match and also onezy twozy Ano costs would just be to high.

Sorry bud.

Very much understood. another question concerning the anno. the pictured ones are, raw? or like a matte clear? I like that look too

Can't wait to grab some of these from you.

RTR 06-18-2012 08:57 PM

Those are not ano'd but glass beaded in preparation for getting ano'd.

lechooch 06-18-2012 09:01 PM

:thumbup:

93civiccpe 06-18-2012 09:02 PM

looks good rodney!

808raoul 06-18-2012 09:10 PM

Awesome! Might have to dip into the J12 fund.


All times are GMT -4. The time now is 05:48 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC