mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   RTR (http://www.mcarterbrown.com/forums/rtr/)
-   -   Autococker deadlywind on the Garg (http://www.mcarterbrown.com/forums/rtr/230937-autococker-deadlywind-garg.html)

Kearns 04-08-2013 10:04 PM

Autococker deadlywind on the Garg
 
Has anyone tried this? Is there clearance for the pump stroke? Will the 1" bushings cause damage?

Any help is appreciated. Thanks in advance.

Broch 04-09-2013 06:49 PM

The larger bushings won't cause damage, just some wiggle. Yes, I have used a DW barrel on a Garg.

Broch 04-09-2013 06:50 PM

Actually, I think I left the rear bushing out.

short304 04-10-2013 09:51 PM

Some how I had deleted my subscription to the RTR Forum :huh: or I would've answer you earlier. The DW Barrel OD is smaller than both the standard 1" cocker bushings AND the 7/8" (?) Phantom bushings so with both there is significant "wiggle" in the pump.

My go-to has been a stock CCI barrel bored for freak inserts using the stock RTR barrel adaptor. The combination of the detents in the barrel adaptor and the bore-sizers is perfect! You get the shot-to-shot consistency w/o the annoying pump wiggle.

Kearns 04-10-2013 10:57 PM

Noted. Thanks short


All times are GMT -4. The time now is 03:01 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC