mcarterbrown.com
 

Showing results 1 to 40 of 233
Search took 0.04 seconds.
Search: Posts Made By: Mad Marty
Forum: Dye 06-25-2014, 01:07 AM
Replies: 7
Views: 336
Posted By Mad Marty
It might, but there very little adjustment there....

It might, but there very little adjustment there. It is really intended for adjusting feed issues. It is best not use fragile paint in the BR; you will be happer if you don't.
Forum: Dye 01-25-2014, 04:59 PM
Replies: 3
Views: 175
Posted By Mad Marty
The easiest way to figure out what size the hole...

The easiest way to figure out what size the hole is or what thread size you have, is to pick up several screw sizes from the hardware store, mark them for reference and then try them in the hole...
Forum: Dye 01-24-2014, 05:22 PM
Replies: 3
Views: 175
Posted By Mad Marty
I don't believe its threaded; unless I am not...

I don't believe its threaded; unless I am not picturing the right hole. There are o-rings between the tank valve-frame-body.
Forum: Dye 01-14-2014, 04:52 PM
Replies: 9
Views: 388
Posted By Mad Marty
I would highly recommend one, if you have the...

I would highly recommend one, if you have the cash. Our whole team runs with the DAM...
SoCalGhosts.com
Forum: Brass Eagle 01-14-2014, 04:49 PM
Replies: 4
Views: 193
Posted By Mad Marty
It sounds like the LPR is not working well or you...

It sounds like the LPR is not working well or you have the hose pinched between the LPR and the Solenoid.

The RM needs speed to complete its cycle. If the ram does not reach the sear pin and...
Forum: Brass Eagle 07-27-2013, 07:35 PM
Replies: 9
Views: 406
Posted By Mad Marty
Interesting...I like the way you modifies the LPR.

Interesting...I like the way you modifies the LPR.
Forum: Dye 07-09-2013, 11:51 PM
Replies: 9
Views: 639
Posted By Mad Marty
Great job Bryan! He fixed mine up as well...

Great job Bryan! He fixed mine up as well...
Forum: Brass Eagle 12-02-2012, 05:22 PM
Replies: 10
Views: 533
Posted By Mad Marty
Hey guys, I have not fall-n of the face of...

Hey guys,

I have not fall-n of the face of the earth, but the issue of life are taking up much of my time. I have been caring for an aging mother, who will be soon going thru cancer treatment....
Forum: Scenarios and Big Games 08-27-2012, 09:12 PM
Replies: 14
Views: 826
Posted By Mad Marty
Now that was a zombie game:gunsfiring:

Now that was a zombie game:gunsfiring:
Forum: Pump Markers 08-17-2012, 06:16 PM
Replies: 3
Views: 300
Posted By Mad Marty
I broke one once during a game; it had problems...

I broke one once during a game; it had problems cocking. FYI
Forum: Brass Eagle 08-12-2012, 07:10 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
If you want to try one more thing; send it to me...

If you want to try one more thing; send it to me and I will give it a going over to see what the deal is, I'll let you know what I find and we'll see from there. At the very most you be out the cost...
Forum: Pump Markers 08-07-2012, 09:39 PM
Replies: 230
Views: 16,632
Posted By Mad Marty
When you start with a new box of paint and close...

When you start with a new box of paint and close out the day with more than 3 bags of paint...

Or when you play with your semi during a scenario game and shot 2 pods the whole weekend...

Or...
Forum: Scenarios and Big Games 08-07-2012, 09:15 PM
Replies: 91
Views: 2,826
Posted By Mad Marty
I wish you could make it out James, but then you...

I wish you could make it out James, but then you would be on that Automag side getting painted

:ROTFL:
Forum: Scenarios and Big Games 08-07-2012, 01:07 AM
Replies: 91
Views: 2,826
Posted By Mad Marty
Yes, they should count...

Yes, they should count...
Forum: Scenarios and Big Games 08-03-2012, 04:40 PM
Replies: 91
Views: 2,826
Posted By Mad Marty
So do we pay at the field? More details on this...

So do we pay at the field? More details on this please.
Forum: Scenarios and Big Games 08-02-2012, 01:06 AM
Replies: 91
Views: 2,826
Posted By Mad Marty
Several of us from San Diego will be showing up...

Several of us from San Diego will be showing up to play on the Autococker side....
Forum: Pump Markers 06-29-2012, 02:02 AM
Replies: 8
Views: 375
Posted By Mad Marty
Sometimes the front block has some play before...

Sometimes the front block has some play before you tighten it down and that play may have pushed to the left is now sticking on the left more than it was before. Loosen it and push it to the right...
Forum: Brass Eagle 06-19-2012, 08:33 PM
Replies: 7
Views: 325
Posted By Mad Marty
Check your LPR pressure, make sure below 100psi. ...

Check your LPR pressure, make sure below 100psi.

Sorry about the auto correct....
Forum: Brass Eagle 06-18-2012, 01:49 AM
Replies: 7
Views: 325
Posted By Mad Marty
Yes, it should ; I use one from a Tommy. Are you...

Yes, it should ; I use one from a Tommy. Are you sure yours is dead? Have you taken it apart, cleaned and lived it. I have brought many a nous bacteria life just by cleaning and living. Now that's...
Forum: Brass Eagle 06-03-2012, 07:03 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
Try this...disconnect the ram wires from the...

Try this...disconnect the ram wires from the circuit board connector. There is a little catch on th side with the hole that you push in and pull on the wire; it will come out.

Gas up the gun and...
Forum: Brass Eagle 06-01-2012, 12:13 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
Is the ram not moving or is it cycling put not...

Is the ram not moving or is it cycling put not firing?
Forum: Brass Eagle 05-15-2012, 07:09 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
If you played with the timing you can remove the...

If you played with the timing you can remove the bearing. I don'tuse one on my gun.
Forum: Brass Eagle 05-08-2012, 10:28 PM
Replies: 16
Views: 1,061
Posted By Mad Marty
Post a picture of the board...thread jacker!

Post a picture of the board...thread jacker!
Forum: Brass Eagle 05-08-2012, 10:25 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
You put a lot of work into preventing the sear...

You put a lot of work into preventing the sear from hitting the carrier. Like I said, my mods solved the issues with the hammer and carrier.
Forum: Brass Eagle 05-08-2012, 10:22 PM
Replies: 7
Views: 305
Posted By Mad Marty
post a picture of the board...

post a picture of the board...
Forum: Brass Eagle 04-30-2012, 10:24 PM
Replies: 2
Views: 257
Posted By Mad Marty
Easy-Off Oven Cleaner

Easy-Off Oven Cleaner
Forum: Brass Eagle 04-29-2012, 01:38 AM
Replies: 93
Views: 3,030
Posted By Mad Marty
My mods solve the problems with the hammer and...

My mods solve the problems with the hammer and carrier. These mods and reshaping the contact point on sear solves the patch problem.
Forum: Brass Eagle 04-28-2012, 12:57 AM
Replies: 93
Views: 3,030
Posted By Mad Marty
To late, its already been done...

To late, its already been done...
Forum: Brass Eagle 04-19-2012, 02:40 PM
Replies: 16
Views: 1,061
Posted By Mad Marty
Marty is still around...

Marty is still around...
Forum: RTP 03-25-2012, 04:44 PM
Replies: 36
Views: 1,787
Posted By Mad Marty
I saw this gun before Rick shipped it out; it is...

I saw this gun before Rick shipped it out; it is really sweet. The action is smooth and as fast as any auto-trigger front pump handle.

Great Job Rick!
Forum: Outlaw / Private Fields 03-25-2012, 04:35 PM
Replies: 5
Views: 475
Posted By Mad Marty
Keep it a secret for as long as you can. Only...

Keep it a secret for as long as you can. Only invite friends you can trust. Once the work gets out it will be spoiled. There is an old saying..."All free spots come to an end."
Forum: Brass Eagle 03-19-2012, 08:27 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
That is exactually what the setscrew mod is...

That is exactually what the setscrew mod is designed for. If you have my mods, you should have the setscrew in the carrier already. If you are going to do it yourself...The setscrew is a 8-32" x 1/4...
Forum: Brass Eagle 03-18-2012, 05:33 PM
Replies: 93
Views: 3,030
Posted By Mad Marty
Hey guys, when troubleshooting valve leaks, I...

Hey guys, when troubleshooting valve leaks, I recommend removing the ram and trigger frame assemblies from the gun. If the ram/carrier is not latched on the hammer, then gassing-up the gun will make...
Forum: Pump Markers 03-01-2012, 11:02 PM
Replies: 11
Views: 737
Posted By Mad Marty
You really need two arms for them to work...

You really need two arms for them to work properly without scraping...
Forum: Custom Projects / Custom Questions 02-17-2012, 11:17 PM
Replies: 487
Views: 21,359
Posted By Mad Marty
Over the years, every discussion on these move...

Over the years, every discussion on these move away from the construction of a silencer to what we see here today.....I would like to know, please, what is the best material to use inside to silence...
Forum: Dye 08-19-2011, 10:51 PM
Replies: 6
Views: 891
Posted By Mad Marty
Look up the manufacture's web site, either order...

Look up the manufacture's web site, either order directly from them or from a distributor. I purchased a spare noid for half what Dye charges. Plus you can purchase the manifold gasgets for like 20...
Forum: Pump Markers 08-19-2011, 10:47 PM
Replies: 11
Views: 745
Posted By Mad Marty
I would recommend air over CO2 any day. Been...

I would recommend air over CO2 any day. Been using air for years, no issues if you know your guns...
Forum: Brass Eagle 07-21-2011, 12:05 AM
Replies: 2
Views: 373
Posted By Mad Marty
Looks to be completely stock. Learn to take it...

Looks to be completely stock. Learn to take it apart, clean and oil it to keep it shooting.
Forum: WGP 06-26-2011, 07:09 PM
Replies: 7
Views: 271
Posted By Mad Marty
Water is never good on electronics. Depending on...

Water is never good on electronics. Depending on how wet you get your board, you could fry it. Rainy days are when you break out the mechs.
Forum: Dye 06-26-2011, 07:07 PM
Replies: 7
Views: 1,540
Posted By Mad Marty
Screw in on the screw to increase the tension,...

Screw in on the screw to increase the tension, screw out to lighten the tension...rightie tightie, lefty loosie...

I replaced stock spring on the Rotor for a lighter one. It feeds just as fast,...
Showing results 1 to 40 of 233

 
Forum Jump

All times are GMT -4. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC