mcarterbrown.com  

Showing results 1 to 40 of 214
Search took 0.36 seconds.
Search: Posts Made By: sdlm
Forum: Air Gun Designs 10-09-2010, 02:21 PM
Replies: 12
Views: 550
Posted By sdlm
FWIW, on my twist lock freak, the bolt doesn't...

FWIW, on my twist lock freak, the bolt doesn't reach the insert either. I suppose this means that people shouldn't really worry too much regardless of what their barrel bore is on an automag, that...
Forum: Air Gun Designs 10-08-2010, 06:59 PM
Replies: 10
Views: 558
Posted By sdlm
Well I replaced my spring and I can't get it to...

Well I replaced my spring and I can't get it to have the problem, but that doesn't mean it is gone, if it does it again though I will check this out, I have actually never used the field strip screw,...
Forum: Ask The Experts 10-08-2010, 06:50 PM
Replies: 1
Views: 181
Posted By sdlm
There is no on/off switch on the DS board model...

There is no on/off switch on the DS board model of Shocker, nor is there a recharable battery. It was a bit of a marketing gimmick, but the 6v battery that came with them was a bit of a money maker...
Forum: Ask The Experts 10-08-2010, 06:38 PM
Replies: 20
Views: 699
Posted By sdlm
I bought a new Full Freak kit for Twist lock...

I bought a new Full Freak kit for Twist lock Automags a long time ago, (previously I used a Stainless Smart Parts Barrel) and I think it was probably one of the best things I have done as an upgrade...
Forum: Air Gun Designs 10-06-2010, 01:13 AM
Replies: 10
Views: 558
Posted By sdlm
I will replace the spring then, I am already...

I will replace the spring then, I am already running the biggest spacer, anything smaller led to rather massive problems. All of the other valves tested used different springs and when I used a Lvl...
Forum: Air Gun Designs 10-05-2010, 03:19 PM
Replies: 10
Views: 558
Posted By sdlm
Yes, but not in the sense the the bolt is stuck...

Yes, but not in the sense the the bolt is stuck forward (which would have air dumping down the barrel), it fails to fully recock, which means the shot is completed fine and then there is nothing, it...
Forum: Smart Parts / GOG 10-05-2010, 03:46 AM
Replies: 5
Views: 511
Posted By sdlm
Paint rolling out is more a function of your...

Paint rolling out is more a function of your barrel with a shocker, being closed bolt and all. that being said, the bore size of the paint you can buy, is a bit inconsistent from batch to batch it...
Forum: Air Gun Designs 10-05-2010, 01:22 AM
Replies: 10
Views: 558
Posted By sdlm
occasional problem

I was wondering what could cause this, my mag when I shoot too fast and short-stroke sometimes fails to recock. The only good solution seems to be to use a slide-check on the valve so that I can...
Forum: The Dead Zone 10-04-2010, 05:48 PM
Replies: 182
Views: 7,795
Posted By sdlm
I think alot of this comes down to the individual...

I think alot of this comes down to the individual batches. The X-ball stuff the OP post was what I used a few weeks ago and it was just absolutely amazing. However, it also didn't roll out of a .688...
Forum: Ask The Experts 10-04-2010, 02:31 PM
Replies: 6
Views: 754
Posted By sdlm
I was thinking of using oil as I worry about...

I was thinking of using oil as I worry about getting moisture in my system, While it doesn't really matter too much for an Aluminum cylinder, that moisture could ruin steel parts in my markers, or...
Forum: Ask The Experts 10-03-2010, 05:33 PM
Replies: 6
Views: 754
Posted By sdlm
That chart needs a sticky, but where is the 33%...

That chart needs a sticky, but where is the 33% "Rule of Thumb" discussed there based on? do 20oz co2 tanks have 33% free space or something?

The only reason why I am using my 114/45 for co2 is...
Forum: Ask The Experts 10-03-2010, 04:25 PM
Replies: 26
Views: 858
Posted By sdlm
3.5oz co2, especially running vertical there are...

3.5oz co2, especially running vertical there are no problems with it. If you have a regulator as your foregrip, then a bottomline with a slight angle should fix any issue you may have with...
Forum: Air Gun Designs 10-03-2010, 04:17 PM
Replies: 3
Views: 402
Posted By sdlm
My E-mag amd Classic mag bodies were different,...

My E-mag amd Classic mag bodies were different, one had a rounded area that connects with the rail, the other had a squared area, my main rail is milled from the factory so that they both fit, but...
Forum: Ask The Experts 10-03-2010, 03:57 PM
Replies: 6
Views: 754
Posted By sdlm
how much co2 should a 114/45 bottle fit?

I have been using a 114/45 for co2 for a while now, In the past I used some carbon fibre tanks with my shocker, and there was always some disagreement on the exact capacities of these tanks. I know a...
Forum: The Dead Zone 09-30-2010, 06:08 PM
Replies: 19
Views: 992
Posted By sdlm
lol a Tippmann 98 is too heavy? My M98,...

lol a Tippmann 98 is too heavy? My M98, Gas-thru-stock, and 12V revolution might weigh 5lbs at most. I think anyone who is in any reasonable shape can carry that for 8 hours.

I remember my old...
Forum: The Dead Zone 09-30-2010, 02:09 PM
Replies: 19
Views: 992
Posted By sdlm
I have seen a new one with a cracked powertube...

I have seen a new one with a cracked powertube which I can't help but feel wouldn't have happened on an old one, but I don't really know the circumstances to how it happened the owner claimed "it...
Forum: Smart Parts / GOG 09-30-2010, 01:14 AM
Replies: 3
Views: 761
Posted By sdlm
drop in imp boards can be found, I seen some...

drop in imp boards can be found, I seen some supposedly nib WAS impulse boards a while back on a forum. You can probably find cricket boards for less than $20 at most paintball forums, as everyone...
Forum: The Dead Zone 09-27-2010, 07:45 PM
Replies: 16
Views: 757
Posted By sdlm
Some years back I was on an all cocker team and,...

Some years back I was on an all cocker team and, the entire time I was like "lets switch to mags" and now, that I shoot mags alot, I can't help but try and get a cocker again.

I love both guns...
Forum: Air Gun Designs 09-25-2010, 08:19 PM
Replies: 8
Views: 407
Posted By sdlm
you know, this is going to sound strange but,...

you know, this is going to sound strange but, when I put my level 10 bolt into my e-mag valve and I put my level 7 bolt in my classicI put my spacer and power tube o-ring in backwards and my gun had...
Forum: Smart Parts / GOG 09-25-2010, 08:06 PM
Replies: 4
Views: 541
Posted By sdlm
sometimes not all the noids will fire, and for me...

sometimes not all the noids will fire, and for me it has always been a low battery issue, before anything I would check that you are getting enough voltage to the board.

Also do you have the DS...
Forum: Air Gun Designs 09-22-2010, 03:16 PM
Replies: 14
Views: 712
Posted By sdlm
Or even better than AS is to run Vertical Co2...

Or even better than AS is to run Vertical Co2 either on gun, or on your back with a Remote which is what I do.

I have shot my mag with several regulators, and I seen no consistancy increase at all...
Forum: The Dead Zone 09-22-2010, 03:01 PM
Replies: 136
Views: 12,988
Posted By sdlm
I wonder where this leaves WDP (APS, Whatever)...

I wonder where this leaves WDP (APS, Whatever) with the whole patent issue. I mean if SP is now GOG, certainly those patents are assets that will be liquidated by creditors (as SP bought their patent...
Forum: WDP 09-21-2010, 02:55 PM
Replies: 6
Views: 450
Posted By sdlm
I have a T-board in some of my guns (though not...

I have a T-board in some of my guns (though not any of my Angels) and I like them, However you will have to find a way to mount the switch so that the trigger activates it.

This was my solution...
Forum: New To The Sport 09-21-2010, 02:32 PM
Replies: 11
Views: 1,072
Posted By sdlm
I want to point out, that an 1/8NPT fill nipple...

I want to point out, that an 1/8NPT fill nipple will work as a Quick Disconnect (QD) however, there are other non fill nipple QDs as well. A Fill nipple has an area in it to allow for a pin with an...
Forum: WDP 09-21-2010, 02:26 AM
Replies: 6
Views: 450
Posted By sdlm
I have a Predator and a Lucky Un1 board, both...

I have a Predator and a Lucky Un1 board, both were simple and easy to install (though you should take your battery out, mine was stuck so it wasn't simple or easy but, that can hardly be blamed on...
Forum: WGP 09-19-2010, 01:11 AM
Replies: 1,170
Sticky: Autococker Pics
Views: 234,731
Posted By sdlm
Don't remember if I posted this here or not...

Don't remember if I posted this here or not before. This is my old 98 Autococker, with pretty much nothing the way it is expected. This is an open bolt Electropneumatic, The WDP minireg was just a...
Forum: WDP 09-18-2010, 10:39 PM
Replies: 6
Views: 487
Posted By sdlm
You'd have to ask someone else on sizes, and...

You'd have to ask someone else on sizes, and threads but, usually I can find anything like that @ Smallparts.com

If no one knows the sizes if you still have the rusted damaged parts measuring...
Forum: Smart Parts / GOG 09-17-2010, 06:36 PM
Replies: 32
Views: 2,883
Posted By sdlm
Here are mine: This one is an old one, with a...

Here are mine:
This one is an old one, with a 9v mod, F/A Mod, Powerswitch Mod, and a switch mod. It also has a Vertical max-flo with the long cap, and an Off The Break 90* Frame.
This Marker has...
Forum: The Dead Zone 09-16-2010, 03:12 PM
Replies: 8
Views: 506
Posted By sdlm
I'm in VA, Where I am at Paintball used to be...

I'm in VA, Where I am at Paintball used to be huge, We had Powerline (Store and Field), Total Eclipse (Store and Field), TMX Paintball (Store and Field), Pink Painter (Field), Soggie Bottoms (Store...
Forum: The Dead Zone 09-16-2010, 12:44 PM
Replies: 8
Views: 506
Posted By sdlm
The local scuba places want you to have some sort...

The local scuba places want you to have some sort of suba or dive license before they will fill your tank, which I think it a little annoying but, I suppose they are just trying to protect their...
Forum: Smart Parts / GOG 09-16-2010, 01:45 AM
Replies: 32
Views: 2,883
Posted By sdlm
I have two shockers and I like them alot. I used...

I have two shockers and I like them alot. I used to have a Planet Eclipse Shocker in the past as well, but I just didn't like the vertical feed, especially the nice splash annoed to match highrise,...
Forum: The Dead Zone 09-16-2010, 01:04 AM
Replies: 8
Views: 506
Posted By sdlm
Played paintball for the first time in a year

with the demise of all the local shops and fields there hasn't been a place to play in an under 45 minute drive, so I haven't done much playing not to mention that I don't have much money and the two...
Forum: Ask The Experts 12-20-2008, 05:41 AM
Replies: 7
Views: 366
Posted By sdlm
These are some of my favorite markers ever built....

These are some of my favorite markers ever built. While zdspb has most everything you will need in the way of reference data, there are a few personal observations that I would like to make.

There...
Forum: Misc Paintball Items 04-25-2008, 01:59 AM
Replies: 9
Views: 391
Posted By sdlm
IIRC Smart Parts first max-flo systems used a...

IIRC Smart Parts first max-flo systems used a left-threaded asa that screwed the tank into the Max-flo so that bottle size could be changed quickly and/or that the normal ASA on gun models could be...
Forum: AKA 04-19-2008, 05:00 AM
Replies: 22
Views: 1,575
Posted By sdlm
Well, the Viking and Excal are great guns, and...

Well, the Viking and Excal are great guns, and they have a large following in my area, they are actually a fair bit more popular than Palmers markers locally.

Here is my critique, with the good...
Forum: AKA 04-10-2008, 05:34 PM
Replies: 8
Views: 735
Posted By sdlm
Instead of using the warp upper adapter, (which I...

Instead of using the warp upper adapter, (which I have seen pop off before) I made a small cut in the hose to fit it around the 90* adapter's input and used a hose clamp to make sure it does not come...
Forum: AKA 04-08-2008, 04:32 PM
Replies: 8
Views: 735
Posted By sdlm
Yep, I have been using a Gas-Thru stock and SS...

Yep, I have been using a Gas-Thru stock and SS braid remote for about 6-7 years now, so it is just natural to me. I do have a Kapp Drop zone that I can mount my tank on, But, even with the Drop Zone...
Forum: The Dead Zone 04-08-2008, 06:04 AM
Replies: 174
Views: 17,753
Posted By sdlm
Valaska, You totally and completely missed the...

Valaska, You totally and completely missed the point on Smart Parts business practices. It isn't that the came up with a great idea and patented it to protect it and are using that patent to drive...
Forum: Air Gun Designs 04-07-2008, 05:52 PM
Replies: 4
Views: 442
Posted By sdlm
Classic valve with level 7 gets me about 10 shots...

Classic valve with level 7 gets me about 10 shots per cubic inch at 3000psi (based off 114ci tank) and about 60 shots per oz of co2 (based off 48oz tank.

Most people report worse figures than me...
Forum: AKA 04-07-2008, 04:00 AM
Replies: 8
Views: 735
Posted By sdlm
Any AKA owners run a Warp?

I like Warps myself, Here is my setup: http://i168.photobucket.com/albums/u167/sdlm/v468.jpg
I currently run mine with the sensor which has to be turned rather sensitive to work right. Does the WAS...
Showing results 1 to 40 of 214

 
Forum Jump

All times are GMT -4. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC