mcarterbrown.com  

Showing results 1 to 40 of 295
Search took 0.03 seconds.
Search: Posts Made By: Rolling Thunder 67
Forum: Rare, Old Guns 07-21-2016, 07:21 AM
Replies: 7
Views: 324
Posted By Rolling Thunder 67
just a 411, the storm is a semi.

just a 411, the storm is a semi.
Forum: Tippmann 06-11-2016, 06:59 AM
Replies: 3
Views: 163
Posted By Rolling Thunder 67
May I suggest you disassemble on of the cup...

May I suggest you disassemble on of the cup seals, it's only a press fit for the pin, remove the worn flat seal and head to the hardware store to the plumbing section and start looking at the flat...
Forum: Tippmann 05-07-2016, 11:14 PM
Replies: 25
Views: 560
Posted By Rolling Thunder 67
Any chance that the inner valve spring might be...

Any chance that the inner valve spring might be broke or weak? If valve is not exhausting you will not trip the cyclone or reset the hammer.

Just a thought
Forum: WTB 05-05-2016, 09:59 PM
Replies: 9
Views: 143
Posted By Rolling Thunder 67
If the bottle O-rings are not fitting the bill...

If the bottle O-rings are not fitting the bill have you considered moving up one size? Bottle O-rings are 015, so you could try a 016.

Just a thought.
Forum: New To The Sport 04-24-2016, 08:39 PM
Replies: 10
Views: 731
Posted By Rolling Thunder 67
The broken piece is your link pin for the hammer...

The broken piece is your link pin for the hammer and bolt. You can fab one of those from an allen key. I did a tutorial on how to make a link pin. search, Just got a Raptor!! posted by Tif...
Forum: Custom Projects / Custom Questions 04-15-2016, 03:35 PM
Replies: 7
Views: 324
Posted By Rolling Thunder 67
Create a tip that will do both and you have a...

Create a tip that will do both and you have a winner!, 5/16 hex stock for the Cocker and remove 2 points at other end to create 5/16 box for Sheridan (if plausible). Drill through center for exhaust...
Forum: Miscellaneous Markers 04-10-2016, 05:26 PM
Replies: 20
Views: 5,484
Posted By Rolling Thunder 67
Surprise!! a complete & operational USI...

Surprise!! a complete & operational USI eliminator.




http://www.mcarterbrown.com/gallery/data/500/medium/Eliminator.JPG
Forum: Ask The Experts 04-08-2016, 08:18 PM
Replies: 29
Views: 564
Posted By Rolling Thunder 67
Your culprit might be the pierce pin cup seal...

Your culprit might be the pierce pin cup seal ,this will vent a 12vie real quick . If hammer is pulled back there should no pressure on exhaust valve stem to hold it open. outside of the seals being...
Forum: Ask The Experts 04-05-2016, 06:33 AM
Replies: 29
Views: 564
Posted By Rolling Thunder 67
I stand corrected, Polyurethane, (tank...

I stand corrected, Polyurethane, (tank O-rings)are what I made reference to as Nitrile. Buna N I just call Buna, due to the mix of materials that make up a Buna N o-ring.

My apologizes if this...
Forum: Ask The Experts 04-04-2016, 03:01 PM
Replies: 29
Views: 564
Posted By Rolling Thunder 67
For what's it worth you might consider using a...

For what's it worth you might consider using a Nitrile o-ring on the front of the valve body and a buna o-ring on the back of the valve body. This is how spyders are set up from the factory as the...
Forum: Bug Reports 04-02-2016, 03:35 PM
Replies: 15
Views: 358
Posted By Rolling Thunder 67
Website is holding stable with no errors as late...

Website is holding stable with no errors as late this morning. Thought you might like a follow up.
Forum: Bug Reports 04-02-2016, 09:01 AM
Replies: 15
Views: 358
Posted By Rolling Thunder 67
Still getting forbidden errors' today, noted that...

Still getting forbidden errors' today, noted that in the last couple days of errors that the controls for web site view (default, classic, dark) have been absent from the web page. Not sure if this...
Forum: Electronic 03-26-2016, 05:24 AM
Replies: 5
Views: 422
Posted By Rolling Thunder 67
SOLD

SOLD
Forum: Electronic 03-24-2016, 11:04 PM
Replies: 5
Views: 422
Posted By Rolling Thunder 67
Pending

Pending
Forum: Pump Guns 03-23-2016, 05:59 PM
Replies: 4
Views: 342
Posted By Rolling Thunder 67
curious as to who made that style of barrel? is...

curious as to who made that style of barrel? is it a spyder thread on the front of this 2 piece?
Forum: Electronic 03-23-2016, 07:07 AM
Replies: 5
Views: 422
Posted By Rolling Thunder 67
TTT

TTT
Forum: Electronic 03-21-2016, 11:19 AM
Replies: 5
Views: 422
Posted By Rolling Thunder 67
TTT

TTT
Forum: WGP 03-20-2016, 07:59 AM
Replies: 5
Views: 245
Posted By Rolling Thunder 67
You are correct. the hardness of the O-rings is...

You are correct. the hardness of the O-rings is marginal. I would use your PU 90D 015 orings to re seal the marker first, might only be the 2 busted o-rings from the valve body causing it to leak,...
Forum: Electronic 03-19-2016, 02:15 PM
Replies: 5
Views: 422
Posted By Rolling Thunder 67
Half Naked DP 07'

Looking to sell this 07' DP Fusion. Factory reg. ,ASA, Rail and right side grip M.I.A. Marker has been benched with an alternate Reg.aired up with no leaks and cycles.
...
Forum: WGP 03-16-2016, 02:54 PM
Replies: 5
Views: 245
Posted By Rolling Thunder 67
After reviewing the schematic of the Boss ranger,...

After reviewing the schematic of the Boss ranger, I would say that a spyder cup seal and o ring kit plus a couple of tank o rings would get you up and running.

(PU) stands for poly urethane and...
Forum: WTB 03-12-2016, 08:10 AM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
apparently everybody lost one,lol. bump

apparently everybody lost one,lol. bump
Forum: Ask The Experts 03-12-2016, 08:06 AM
Replies: 3
Views: 220
Posted By Rolling Thunder 67
Success!! I believe that the trigger sear was not...

Success!! I believe that the trigger sear was not catching the hammer lug, during re-assembly, I took the time to review a timing video and found that the lug was set too short. A couple of spins on...
Forum: WTB 03-10-2016, 11:03 PM
Replies: 4
Views: 158
Posted By Rolling Thunder 67
Purchased a drop out listed as a phantom years...

Purchased a drop out listed as a phantom years ago off ebay, pulled the valve/spring from my Maverick, screwed it together, mounted it in the maverick, no issues.

So I would say that a CCI is a...
Forum: WTB 03-07-2016, 08:19 AM
Replies: 5
Views: 143
Posted By Rolling Thunder 67
PM'd

PM'd
Forum: Ask The Experts 03-01-2016, 07:29 AM
Replies: 3
Views: 220
Posted By Rolling Thunder 67
Thanks for your input. To answer your questions,...

Thanks for your input. To answer your questions, in the process of trouble shooting this the first time,the 3 way o rings gave out and just recently sourced them, plus I just disassembled the marker...
Forum: Ask The Experts 02-27-2016, 06:21 PM
Replies: 3
Views: 220
Posted By Rolling Thunder 67
97' Autococker hammer spring ?

Hoping to get some ideas about a pre 98, likely closer to a 97 by serial number, 30831.

I can get the marker to cycle the bolt back, but after that it just sits locked up until it vents out the 3...
Forum: WTB 02-27-2016, 01:16 PM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
Any rattling around the bottom of the MISC. parts...

Any rattling around the bottom of the MISC. parts bin???
Forum: Brass Eagle 02-25-2016, 06:10 PM
Replies: 18
Views: 465
Posted By Rolling Thunder 67
Your Welcome. Just trying to help the...

Your Welcome. Just trying to help the brotherhood. Kind of thought about throwing out the idea drilling out the BE/VL valve body to fit a Spyder valve stem and cup seal, looked real quick and there...
Forum: WTB 02-25-2016, 05:57 PM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
Thought you would, lol.

Thought you would, lol.
Forum: Brass Eagle 02-25-2016, 02:25 PM
Replies: 18
Views: 465
Posted By Rolling Thunder 67
Reference to WalMart specials was for the lower...

Reference to WalMart specials was for the lower end markers such as BE/VL that I mentioned, I don't ever recall seeing any of these at a pro shop, these were usually marketed as an entry level marker...
Forum: Brass Eagle 02-25-2016, 06:37 AM
Replies: 18
Views: 465
Posted By Rolling Thunder 67
Fubarius is on the right track, I took his idea...

Fubarius is on the right track, I took his idea and cross referenced against a couple of BE/VL that were on hand(Orion/ZXS 400/Triton) against my Silver Eagle Raptor and they were all the same...
Forum: WTB 02-24-2016, 04:06 PM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
Still looking,bump

Still looking,bump
Forum: Ask The Experts 02-23-2016, 11:32 PM
Replies: 10
Views: 253
Posted By Rolling Thunder 67
Just opened up my F1 and my F4 and found the cup...

Just opened up my F1 and my F4 and found the cup seals to be identical. Question is what version of an F4 are you looking at? There were 2 versions of an F4 pre 98 trigger frame was specific to ACI...
Forum: WTB 02-19-2016, 09:07 AM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
Seems to be an elusive little bugger, lol bump

Seems to be an elusive little bugger, lol bump
Forum: WTB 02-18-2016, 08:27 AM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
bump

bump
Forum: Feedback 02-17-2016, 11:45 PM
Replies: 59
Views: 2,476
Posted By Rolling Thunder 67
Recently sold him 07' PMR, transaction went...

Recently sold him 07' PMR, transaction went smoothly. would gladly do business again.
Forum: Tippmann 02-17-2016, 06:57 PM
Replies: 10
Views: 325
Posted By Rolling Thunder 67
Any chance that the brass air fitting may have...

Any chance that the brass air fitting may have been over tightened at one point and has pulled the threads up on the valve body? This would raise the edge of the threaded hole and could be why the...
Forum: WTB 02-16-2016, 12:12 AM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
bump

bump
Forum: WTB 02-14-2016, 06:56 AM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
bump

bump
Forum: WTB 02-12-2016, 12:16 PM
Replies: 9
Views: 188
Posted By Rolling Thunder 67
WTB: Lever/DogLeg for a PCS/32* Car Stock

Trying to hunt down a lever/dogleg for a 1st gen. CAR stock. These were typically distributed by PCS or 32 Degrees. I've added a picture for reference.

52093

They have a shiny black finish to...
Showing results 1 to 40 of 295

 
Forum Jump

All times are GMT -4. The time now is 07:12 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC