pgp leak - Page 2

Wharf Rat · 03-11-2007, 09:51 PM

BTW, discard the lead washer and do not replace it. P

g35x · 03-11-2007, 10:03 PM

Quote:

Originally Posted by Wharf Rat

BTW, discard the lead washer and do not replace it. P

what?????

c6quad · 03-11-2007, 11:58 PM

Quote:

Originally Posted by g35x

what?????

you'll understand what WharfRat is saying when you pull the valve out.

there is a lead washer under the square valve nut. throw that washer away, you don't need it. reassemble the valve without that washer.

g35x · 03-12-2007, 07:23 AM

okay, thanks for all your help guys

g35x · 03-12-2007, 06:21 PM

edit: and how do you adjust velocity on one of these?

ok i tried another 12 gram and it worked
and the first 12 gram pierced correctly so idk what was wrong the first time around but on run 2 i got this (click to watch the vid)

c6quad · 03-12-2007, 07:22 PM

you need to buy an RVA(rear velocity adjuster) to adjust the velocity. that's your best way to do it.

or add some small washers behind the hammer spring to increase velocity. shorten the hammer spring to decrease velocity. be carefull when you shorten the spring. take your time and shorten it in very small increments or you'll get it too short and a velocity that's too low.

03-11-2007, 09:51 PM	#11 (permalink)
Wharf Rat Galactic Overlord Join Date: Apr 2006	BTW, discard the lead washer and do not replace it. P __________________ Scourge of the Spaceways

03-12-2007, 07:23 AM	#14 (permalink)
g35x Active Member Join Date: Nov 2006 Location: 856 / 609 NJ	okay, thanks for all your help guys __________________

03-12-2007, 06:21 PM	#15 (permalink)
g35x Active Member Join Date: Nov 2006 Location: 856 / 609 NJ	edit: and how do you adjust velocity on one of these? ok i tried another 12 gram and it worked and the first 12 gram pierced correctly so idk what was wrong the first time around but on run 2 i got this (click to watch the vid) __________________ Last edited by g35x; 03-12-2007 at 06:26 PM..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-12-2007, 07:22 PM	#16 (permalink)
c6quad MCB Member Join Date: Apr 2006 Location: NC	you need to buy an RVA(rear velocity adjuster) to adjust the velocity. that's your best way to do it. or add some small washers behind the hammer spring to increase velocity. shorten the hammer spring to decrease velocity. be carefull when you shorten the spring. take your time and shorten it in very small increments or you'll get it too short and a velocity that's too low.