mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 07-20-2006, 09:31 PM   #1 (permalink)
Active Member
 
Lone Goose's Avatar
 
Join Date: Jul 2006
Location: NW VT

Pump on a XTS?

Has anyone ever put a pump on an XTS? I have one, and never use it. Thinking about selling it, but wondering how tough it would be to convert to a pump?

It works like a pro-carbine turned sideways (the link arm is on the right, rather than on the top).

Seem like a few parts could make it a pump and it could still be switched back to semi if desired.
__________________
Lone Goose

Always looking for pump games near NW VT.
Lone Goose is offline   Reply With Quote
Old 07-20-2006, 10:12 PM   #2 (permalink)
Sugar Loaded Candy Cane!
 
Mstrtal's Avatar
 
Join Date: Mar 2006
Location: Unfortunatly I live
Send a message via AIM to Mstrtal Send a message via Yahoo to Mstrtal

Brass N Wood Fan
Kilt Fan
I asked this on the old MCB way back and was told Iwould have to mill a slot for a pump arm to connect to the bolt and I would have to modify or replace some thing ( I cant remember what) sothat the pin will not depress and use the excess gas to "blowback". I think it was KidneThief who told me how. I never got around to it. G'Luck
__________________
"You can also Put it on Your Penis."

Bedknobs and Boomsticks!

Originally Posted by commandoman
Kick back and enjoy the atmosphere, sexy girls at my school keep me sane through the worst lectures by the worst professors

Mstrtal is offline   Reply With Quote
Old 07-21-2006, 09:18 AM   #3 (permalink)
Active Member
 
Lone Goose's Avatar
 
Join Date: Jul 2006
Location: NW VT

I thought that if a rail could be milled to replace the plastic slider cover on the right side, (that holds the detent and the link arm in place), remove the link arm and put pins going out from the bolt and the hammer that would attach to a second rail attached to the pump handle. The pump handle could be attached to by one bolt to the front underside of the marker where some wts' have a front grip. The pin to the bolt would sit in a slot to give it free movement (if needed at all). I would let the blow-back continue to reset the hammer, and the pump stroke would only chamber a ball. (Not sure if I am makiing sense here)

But that way, the mods would be minimal and reversable.

Possible????
__________________
Lone Goose

Always looking for pump games near NW VT.
Lone Goose is offline   Reply With Quote
Old 07-21-2006, 09:38 AM   #4 (permalink)
Passing through rider
 
Azzy's Avatar
 
Join Date: Mar 2006
Location: Finleyville, PA

Fan of EMR
Brass N Wood Fan
For that you pull out the link arm, flip it around, and attach it to the pump handle.
__________________
Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6
www.AzzysDesignWorks.com - best replacement jeep gauges in the biz
Old Timer Feedback
Azzy is offline   Reply With Quote
Old 07-21-2006, 04:14 PM   #5 (permalink)
Memento mori.
 
Finnigan's Avatar
 
Join Date: Jul 2006
Location: NJ. Exit 77

Brass N Wood Fan
Kilt Fan
It could easily be done without too much modification. have a look at a Brass Eagle Cobra. It would amount to the same thing.
Finnigan is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Sheridan

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC