|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
05-03-2011, 03:06 PM
| #1 (permalink) |
| Distruster of Joggers  Join Date: Mar 2006 Location: 6,874 Paul Simon's north of the white house | Barrel clamp for a sheridan
Anyone had success fitting a barrel mount to a sheridan? I have a paladin pump and want to fit picatinny rails to it. All the mounts I have found so far clamp around a single barrel, but the top tube/lower tube set up is stumping me.
__________________ The one man who has had the greatest positive impact on the environment of this planet is Genghis Khan. |
|  |
|
05-03-2011, 03:44 PM
| #2 (permalink) | |
| TANSTAAFL  Join Date: Feb 2008 Location: People's Republic of Maryland  |
How low profile are you looking for? I have an idea where four "fingers" could be made (two for each side), that have the same arc as the top tube and extend down to where the two tubes come together. they then screw into another piece at the top, and are tight enough that tightening them down secures it to the top tube. The top piece can have holes drilled and tapped for a piece of picatinny to sit on top.
__________________ Running on an odd number of cylinders Quote:
| |
|
| |
|
05-03-2011, 03:57 PM
| #3 (permalink) |
| Distruster of Joggers Join Date: Mar 2006 Location: 6,874 Paul Simon's north of the white house |
Actually I have figured it out, i wanted to mount the camera towards the front end but my sight rail is center enough on the gun to make it work. Now it looks like I have a mini hopper on top of a stock class gun.
__________________ The one man who has had the greatest positive impact on the environment of this planet is Genghis Khan. |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
