KP pics and questions, even a little WTB - Page 3

angelpena · 07-01-2007, 06:24 PM

The asa is where I'm guestimating it will sit, I'll know more one my dummy 12 g arrives.

Here is CA option #1

It looks cool but I'd be a little worried about liquid in the valve, but not too much.

I'd have to use one of the mounting holes for the drop to hold the barrel assembly on.

Here is CA option #2

the drop for this one can be shaved and made smaller, so the barrel assembly screw, and be separated, and the tank will tilt down some.

Brassballs · 07-01-2007, 07:10 PM

2nd one looks good.

I'd just cut the ft. back on the mount.

angelpena · 07-04-2007, 08:03 PM

Before....

After.....

Still need the dummy to proceed futher, but I think I'll be in the home stretch once it's here.

I need to mill the stock flat where the drop will sit.

chplnstone · 07-05-2007, 02:07 PM

and another idea, i used a bottom tap on my blue streak build...

angelpena · 07-05-2007, 02:27 PM

Nice, I'm considering just tapping the valve/dummy, without using an asa too, since I doubt I'll ever mount the bottle vertically.

Rypper72 · 07-05-2007, 02:27 PM

Angel,

That "ugly duckling" is shaping up to be a beaut. That bottom-line really gives it some nice lines, and strangely... I like the pipe fit top tube the more I look at it. And the brass... soooo shiny...

Keep us updated

Howie

Gazoo · 07-06-2007, 10:49 PM

A,
I may have the old style dummy changer from my KP I just got. You will have to re-plumb the line as it had the funky spigot type on off.

angelpena · 07-13-2007, 01:52 AM

Ladies and gentlemen, we have CA......

angelpena · 07-14-2007, 07:44 PM

DarkStar · 07-15-2007, 05:43 PM

Nice, It turned out great. Quite a difference a little elbow grease can do.

-MR

07-01-2007, 06:24 PM	#21 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM	The asa is where I'm guestimating it will sit, I'll know more one my dummy 12 g arrives. Here is CA option #1 It looks cool but I'd be a little worried about liquid in the valve, but not too much. I'd have to use one of the mounting holes for the drop to hold the barrel assembly on. Here is CA option #2 the drop for this one can be shaved and made smaller, so the barrel assembly screw, and be separated, and the tank will tilt down some. __________________ Looks like I picked the wrong week to quit gun whorring...

07-04-2007, 08:03 PM	#23 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM	Before.... After..... Still need the dummy to proceed futher, but I think I'll be in the home stretch once it's here. I need to mill the stock flat where the drop will sit. __________________ Looks like I picked the wrong week to quit gun whorring...

07-05-2007, 02:27 PM	#25 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM	Nice, I'm considering just tapping the valve/dummy, without using an asa too, since I doubt I'll ever mount the bottle vertically. __________________ Looks like I picked the wrong week to quit gun whorring...

07-05-2007, 02:27 PM	#26 (permalink)
Rypper72 Active Member Join Date: Jun 2007 Location: Nor-Cal, CA	Angel, That "ugly duckling" is shaping up to be a beaut. That bottom-line really gives it some nice lines, and strangely... I like the pipe fit top tube the more I look at it. And the brass... soooo shiny... Keep us updated Howie __________________ Howie/Rypper No'Maam #33 TIP #can't remember JAGW #???88 Feedback Thread - http://www.mcarterbrown.com/forums/f...-feedback.html Gallery - http://www.mcarterbrown.com/gallery/...user/2629/sl/r "No... Stop... NO MORE GUNS!!!"

07-06-2007, 10:49 PM	#27 (permalink)
Gazoo Active Member Join Date: May 2007 Location: Forest Lake MN	A, I may have the old style dummy changer from my KP I just got. You will have to re-plumb the line as it had the funky spigot type on off. __________________ I am just a figment of your imagination.

07-01-2007, 07:10 PM	#22 (permalink)
Brassballs Damage Inc. Lord Join Date: Apr 2006	2nd one looks good. I'd just cut the ft. back on the mount.

07-13-2007, 01:52 AM	#28 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM	Ladies and gentlemen, we have CA...... __________________ Looks like I picked the wrong week to quit gun whorring...

07-14-2007, 07:44 PM	#29 (permalink)
angelpena Fair Weather Moderator Join Date: Apr 2006 Location: ABQ, NM	__________________ Looks like I picked the wrong week to quit gun whorring... Last edited by angelpena; 07-14-2007 at 09:32 PM..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search