KP-2 Parts

Dennis · 01-19-2012, 06:55 PM

Hello everyone,

I am looking to find a few screws for a KP-2 project I am working on. The screws/parts in question happen to be the rod that lets the bolt engage the hammer, and the 2 screws and nut that are used to hold the body of the marker to the stock. I have attached an image below containing the parts highlighted on the K-2/KP-2 diagram and a picture of the parts in question. Thanks in advance!

taco · 01-19-2012, 06:57 PM

Mad has the Pringle nut part used to attach the assembly to a stalk but not sure about the bolt lug

Sheridan Seal Kits, Springs, Pump Arms and Misc Parts

Dennis · 01-19-2012, 07:04 PM

Wow that was quick!

Thanks again!

russc · 01-19-2012, 07:08 PM

The bolt lug should be a standard hardware store screw...not sure of the thread, though.

longstar550 · 01-19-2012, 10:24 PM

threads should be 6/32

Stilgar · 01-19-2012, 10:27 PM

Thanks! I also needed a bolt lug!

funsi00 · 01-20-2012, 12:53 AM

The screw between stock and body is 1/4-20, unsure of length. Here is the other part. Fast Action Screw Set [SHER078] - $14.00 : Palmers Pursuit Shop, Where Custom Still Means Something

sniper42 · 01-20-2012, 03:59 AM

The cocking lug threads can vary. Mine personally is 8-32 but there are some that are 6-32 as well. All of those screws can be had for cheap at your local hardware store. The pringle nut might be harder to come by though.

Dennis · 01-21-2012, 02:06 PM

Here, I figured I would post up some pics of the project I am working on. I haven't really started yet. I have only cleaned off the dirt and gunk it collected from sitting in a barn for about 15 years. It also looks like I am going to have to fix the lower tube where the action fastener screw assembly attaches the body to the stock.

01-19-2012, 06:55 PM	#1 (permalink)
Dennis Warzone Paintball Join Date: Feb 2007 Location: Rhode Island	KP-2 Parts Hello everyone, I am looking to find a few screws for a KP-2 project I am working on. The screws/parts in question happen to be the rod that lets the bolt engage the hammer, and the 2 screws and nut that are used to hold the body of the marker to the stock. I have attached an image below containing the parts highlighted on the K-2/KP-2 diagram and a picture of the parts in question. Thanks in advance! Attached Images __________________ Warzone Paintball and Airsoft

01-19-2012, 06:57 PM	#2 (permalink)
taco Ornamental redneck Join Date: Feb 2007 Location: lbc	Mad has the Pringle nut part used to attach the assembly to a stalk but not sure about the bolt lug Sheridan Seal Kits, Springs, Pump Arms and Misc Parts __________________ Mcb lovin!

01-19-2012, 07:04 PM	#3 (permalink)
Dennis Warzone Paintball Join Date: Feb 2007 Location: Rhode Island	Wow that was quick! Thanks again! __________________ Warzone Paintball and Airsoft

01-19-2012, 10:24 PM	#5 (permalink)
longstar550 Active Member Join Date: Aug 2010 Location: BC canada	threads should be 6/32 __________________ pmr parts http://www.mcarterbrown.com/forums/m...pmr-parts.html feedback http://www.mcarterbrown.com/forums/f...ml#post1737253

01-19-2012, 10:27 PM	#6 (permalink)
Stilgar Walking without rhythm Join Date: Jul 2009 Location: North of 49	Thanks! I also needed a bolt lug! __________________ Featuring Death on Facebook! Gravity League Ottawa - Like us on Facebook! GLO Season Opener *NEW DATE 25 May* 2013 Feedback here. Patagonia Down Vest NWT $99 Shipped! Need to sell!! How to Ship to Canada! How to make a 45* stickfeed for open class guns

01-20-2012, 12:53 AM	#7 (permalink)
funsi00 MCB Member Join Date: Jul 2006 Location: Cleveland, Ohio	The screw between stock and body is 1/4-20, unsure of length. Here is the other part. Fast Action Screw Set [SHER078] - $14.00 : Palmers Pursuit Shop, Where Custom Still Means Something __________________ My feedback on MCB : http://www.mcarterbrown.com/forums/f...-feedback.html Brass Mafia - team status S4

01-21-2012, 02:06 PM	#9 (permalink)
Dennis Warzone Paintball Join Date: Feb 2007 Location: Rhode Island	Here, I figured I would post up some pics of the project I am working on. I haven't really started yet. I have only cleaned off the dirt and gunk it collected from sitting in a barn for about 15 years. It also looks like I am going to have to fix the lower tube where the action fastener screw assembly attaches the body to the stock. Attached Images __________________ Warzone Paintball and Airsoft Last edited by Dennis; 01-21-2012 at 02:12 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search