mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Sheridan (http://www.mcarterbrown.com/forums/sheridan/)
-   -   Faast Changer question (http://www.mcarterbrown.com/forums/sheridan/191682-faast-changer-question.html)

sheriff_matt 02-11-2012 12:25 PM

Faast Changer question
 
I was looking at getting a quick change knob for a PMI-1 but the only one I could find was the fast change knob on palmer's site. It's listed as a PGP fast change knob...I was just wondering if this will work with the PMI-1 or if it's a different threading.

mailmanmike 02-11-2012 12:36 PM

Its the same threading and all that it just doesn't come with the rod. You'll just have to take the plunger rod thing from your stock changer and add in to the faast changer.

I hope that made sense, i'm having a bad day with words..

Stilgar 02-11-2012 02:02 PM

^ this will work...however I found that the plunger rod was about 1/4-1/2" too long? It would still work, and it would still hold in a 12g but the fast changer could not screw in ALL the way...

sheriff_matt 02-11-2012 08:13 PM

Thanks for the help guys. I'll have to give it a shot. I was also considering rigging a vertical air setup with a CCI dropout changer.


All times are GMT -4. The time now is 12:32 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC