mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Sheridan (http://www.mcarterbrown.com/forums/sheridan/)
-   -   Sheridan Goodness! Steal of my life (http://www.mcarterbrown.com/forums/sheridan/197247-sheridan-goodness-steal-my-life.html)

GhostLeader 101 03-27-2012 11:19 PM

Sheridan Goodness! Steal of my life
 
I got it!
pictures soon! need help!
got KP3 and PGP

http://i249.photobucket.com/albums/g...d86ea01e2c.jpg

UPDATED!
more pictures guys!
http://i249.photobucket.com/albums/g...3-27213224.jpg
http://i249.photobucket.com/albums/g...3-27213254.jpg
http://i249.photobucket.com/albums/g...3-27213329.jpg
http://i249.photobucket.com/albums/g...3-27214337.jpg
http://i249.photobucket.com/albums/g...3-27214011.jpg

the Pgp needs a little work. well maybe a lot, 12 stuck, and its not cocking. I think its gummed up.

the KP3 has a the leak, and its not the 90 elbow at the end. its the piece it screws into. it has a crack. weird but I seen it happen. I need your help on replacement parts. also I need a tool to tear it apart
thanks guys

chplnstone 03-27-2012 11:23 PM

likely cracked aluminum on the kp3 ca adapter, oldschool fix was just cut the last 1/4" or so off it and rethread it to 1/8" npt...

GhostLeader 101 03-27-2012 11:25 PM

Will it hurt the price when going to sell it

chplnstone 03-27-2012 11:30 PM

if fixed it shouldn't, just be honest about it... they usually have about 1/2" sticking out anyway, no real loss being shorter, just be carefully not to use too much teflon tape when installing the 90 degree elbow, that's the reason they usually split...

Rockfrog 03-28-2012 01:45 AM

skip the tape and use blue loc-tite. You don't need to cram the fitting in so much (1/4 turn past hand tight usually works for me) and once dry holds the pressure just as well.

GhostLeader 101 03-28-2012 01:50 AM

is there any way I can get a replacement part for this?

Long Beard 03-28-2012 09:00 AM

depending on what style of CA adapter, it's possible that you could replace the end piece. I might even know where to get one of those bits. However it's also a pretty easy fix as stated above.

talk to Titus about valve tools. He has the best prices on those.

senghing27 03-28-2012 09:25 AM

That PGP needs a deep cleaning. Like uber deep cleaning.
Congrats on the buy.

GhostLeader 101 03-28-2012 11:12 AM

Where can I get a pgp puncture seal and spare parts?
And same with the CA thing

senghing27 03-28-2012 11:22 AM

MaD on here for the seals.
Palmers pursuit shop would be the best for everything else.


All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC