mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-11-2012, 02:14 PM   #1 (permalink)
Sorry, that's classified.
 
Donut SD's Avatar
 
Join Date: Sep 2011
Location: SoCal, USA

Pgp bolt lug

This might be a quick one, anyhow like the title says I'm searching for a pgp bolt lug. Just picked up a bolt without one. If I can get the one out from my stock bolt how do I do that without destroying it? Is it loctite in there?
Donut SD is offline   Reply With Quote
Old 04-11-2012, 02:24 PM   #2 (permalink)
MCB Member
 
WALZ's Avatar
 
Join Date: Nov 2010
Location: coarsegold,ca

Brass N Wood Fan
RTP Fan
The easy way is to remove pump arm- put end of rod back into bolt and twist it cockwise with bolt in fire position. Bolt pin should now be sticking out side of marker where it is notched out. There is a small slot for a small screwdriver in the tip of the pin. Remove with driver or small vice grips (carefully so you don't scratch marker). You can use a #8 set screw for as a new pin (screw it in so it just clears top of hammer. Hope this helps> If there is no slot for a flat driver then its a push in pin and just push it in firm and pull bolt out...
__________________
WALZ Feedback
WALZ is offline   Reply With Quote
Old 04-11-2012, 02:32 PM   #3 (permalink)
Sorry, that's classified.
 
Donut SD's Avatar
 
Join Date: Sep 2011
Location: SoCal, USA

Thanks, I'll give it a shot and update when I get home
Donut SD is offline   Reply With Quote
Old 04-11-2012, 02:38 PM   #4 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Is it the threaded kind or the type with the push type pin?
__________________
Feedback

Quote:
Originally Posted by senghing27
ooops
Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Old 04-11-2012, 04:19 PM   #5 (permalink)
Sorry, that's classified.
 
Donut SD's Avatar
 
Join Date: Sep 2011
Location: SoCal, USA

Lol its possibly a push pin. Lemme be specific. It's a pgp2 bolt that I'm gonna attempt to take the lug off of. And hopefully put into the new cooper t bolt I got. After an attempt yesterday at unscrewing it to no avail, what you say may help. I'll take a better look and pics for sure when I get home (still posting from work :P). I don't recall a slot for a screwby and that narrows it down for me.

#8 screw could be my savior too, thanks for the tip WALZ, the cooper t bolt is threaded down there and me taking the lug out may be useless.
Donut SD is offline   Reply With Quote
Old 04-11-2012, 04:21 PM   #6 (permalink)
Lathe Fiend
 
sniper42's Avatar
 
Join Date: Sep 2008
Location: Huntington Beach, CA

If it is a PGP2, then it is a push type lug. It is spring loaded so just push it down with an allen then slide it out the back
__________________
Anonymous Assassins Paintball TeamJust look for the pink shirts

Quote:
Originally Posted by BigOldSkool View Post
CNC's are for nerds...
MCB Feedback


Sheridan Misc FS: Grips, bodies
sniper42 is offline   Reply With Quote
Old 04-11-2012, 05:02 PM   #7 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Yeah, the new PGP bolts use a spring loaded pin that you just push in. Also, unless you're switching to a centerfire bolt, there is absolutely no advantage to the cooper-T over the stock bolt unless you like the pretty red color and $40 less in your pocket.
__________________
Feedback

Quote:
Originally Posted by senghing27
ooops
Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Old 04-11-2012, 05:28 PM   #8 (permalink)
Sorry, that's classified.
 
Donut SD's Avatar
 
Join Date: Sep 2011
Location: SoCal, USA

Quote:
Originally Posted by MaD View Post
Yeah, the new PGP bolts use a spring loaded pin that you just push in. Also, unless you're switching to a centerfire bolt, there is absolutely no advantage to the cooper-T over the stock bolt unless you like the pretty red color and $40 less in your pocket.
Yes I just wanted the red. Lol I'm that picky.
Donut SD is offline   Reply With Quote
Old 04-11-2012, 07:43 PM   #9 (permalink)
Sorry, that's classified.
 
Donut SD's Avatar
 
Join Date: Sep 2011
Location: SoCal, USA

This is what I'm looking at for removal instructions from you:









This is where I'm gonna need that #8 screw I believe:

Donut SD is offline   Reply With Quote
Old 04-11-2012, 07:57 PM   #10 (permalink)
Lathe Fiend
 
sniper42's Avatar
 
Join Date: Sep 2008
Location: Huntington Beach, CA

There should be a set screw on the opposite side of the pin. Unscrew that and there should be a spring in there and then you can pull the pin out. For the Cooper-t you will need to make your own lug out of a screw of the right threads for that hole.

Edit: Unless that pin on the stock bolt is not the spring loaded type then it may indeed be just threaded in.
__________________
Anonymous Assassins Paintball TeamJust look for the pink shirts

Quote:
Originally Posted by BigOldSkool View Post
CNC's are for nerds...
MCB Feedback


Sheridan Misc FS: Grips, bodies
sniper42 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Sheridan

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:51 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC