PGP Frame Help
I have just picked up a PGP to add to my family. However when taking the frame off the marker the internals n the frame came out & I am not sure how to place them back in to make it work. Any help would be great. (big problem is what way the sear goes & that litle spring around it.
Strange that they would just "fall out" Mine have always required "effort" to gut out.
I will try and get you a picture this afternoon.
OK bare with me, I am on a temporary computer, and have no way to edit these pictures, so I will try to explain them.
The left side of the picture is the front of the frame. This is how the sear is positioned in the frame. Those front little legs sit against the tabs in the next picture.
The left side is the front of the frame. The silver is the trigger(in this picture there is no safety installed). Just behind the trigger(to the right of the picture) you can see little ledges (tabs), the front legs of the sear spring sit against these.
The left side is the front of the frame. Here is a top view of the sear installed.
Bottom of picture is the front of the frame. Here is the bottom view of the sear installed.
Hope these help.
Ignore the dirt in the callouses of my hands, been working in my garden
Thanks snaparen. Those are better pics then I could have provided.
Thanks for the pic this will help me.
|All times are GMT -4. The time now is 12:48 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC