mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 05-20-2012, 03:43 PM   #1 (permalink)
Thrillin' Heroics
 
Marauder_Pilot's Avatar
 
Join Date: Jan 2007
Location: Whitehorse, Yukon

Where to buy cartridge valves?

Is there anybody who sells complete Sheridan cartridge valve assemblies? And, if so, will they drop into a PMI-1 without any modification? I'm so goddamn sick of assembling the standard valves I want to find the designer and shove it up his nose.
__________________


Glory, glory, what a hell of a way to die,
With a rifle in your hands and you're falling through the sky,
Glory, glory, what a hell of a way to die,
He ain't gonna jump no more!

Quote:
Originally Posted by usagi_tetsu View Post
Nothing says "violent and insane" like sharpening a shotgun.
Marauder_Pilot is offline   Reply With Quote
Old 05-20-2012, 03:58 PM   #2 (permalink)
Post Whore
 
Keys_JR's Avatar
 
Join Date: Jun 2009

Clicky
__________________
My Feedback
Keys_JR is online now   Reply With Quote
Old 05-20-2012, 04:00 PM   #3 (permalink)
I've porked many
 
pillage's Avatar
 
Join Date: Apr 2006
Location: Yorktown, Virginia

You would have to remove the internal threaded sleeve that your standard valve nut screws into to get the cart valve to fit.
__________________
If meat is murder, I'll have a beer with the murder please.

My Feedback Thread[/SIZE][/SIZE]
pillage is offline   Reply With Quote
Old 05-20-2012, 04:57 PM   #4 (permalink)
Thrillin' Heroics
 
Marauder_Pilot's Avatar
 
Join Date: Jan 2007
Location: Whitehorse, Yukon

Balls. How does one go about that?
__________________


Glory, glory, what a hell of a way to die,
With a rifle in your hands and you're falling through the sky,
Glory, glory, what a hell of a way to die,
He ain't gonna jump no more!

Quote:
Originally Posted by usagi_tetsu View Post
Nothing says "violent and insane" like sharpening a shotgun.
Marauder_Pilot is offline   Reply With Quote
Old 05-20-2012, 06:21 PM   #5 (permalink)
depot damager
 
anomoly40's Avatar
 
Join Date: Dec 2007
Location: Central Arkansas

Heat and a dowel I suppose. I've never done it and im sure you have to be careful to not unsolder the barrel.
anomoly40 is offline   Reply With Quote
Old 05-20-2012, 08:01 PM   #6 (permalink)
I've porked many
 
pillage's Avatar
 
Join Date: Apr 2006
Location: Yorktown, Virginia

Quote:
Originally Posted by Marauder_Pilot View Post
Balls. How does one go about that?
Heat it with a torch to melt the solder in the lower tube, and push it out when it is hot enough. Of course you stand a good chance of the tubes separating if you get it too hot. That will require re-soldering. If you try it and make a boo boo, it can be soldered back together easily enough.
__________________
If meat is murder, I'll have a beer with the murder please.

My Feedback Thread[/SIZE][/SIZE]
pillage is offline   Reply With Quote
Old 05-20-2012, 08:04 PM   #7 (permalink)
Post Whore
 
Keys_JR's Avatar
 
Join Date: Jun 2009

I wrap the other two tubes with a wet cloth that I don't care about, it also protects the tubes from the vise.
__________________
My Feedback
Keys_JR is online now   Reply With Quote
Old 05-22-2012, 09:28 AM   #8 (permalink)
Red=Moderator
 
Schmitti's Avatar
 
Join Date: Apr 2006
Location: Albany. NY

Also while the solder in the lower tube is still hot, run a shot gun swab or cotton cloth through the lower tube to get all that solder out. Otherwise you will need to heat it again to do that. The lower tube needs to be clean so you can fit the new valve in there.

E
Schmitti is offline   Reply With Quote
Old 05-22-2012, 05:09 PM   #9 (permalink)
Post Whore
 
Keys_JR's Avatar
 
Join Date: Jun 2009

Quote:
Originally Posted by Schmitti View Post
Also while the solder in the lower tube is still hot, run a shot gun swab or cotton cloth through the lower tube to get all that solder out. Otherwise you will need to heat it again to do that. The lower tube needs to be clean so you can fit the new valve in there.

E
Good point! Also if you concentrate the heat just at the threaded insert there shouldn't be too much solder melting elsewhere (brass is not the best heat conductor) This is also good as solder will not adhere properly to a cold (even if relatively) surface.
__________________
My Feedback
Keys_JR is online now   Reply With Quote
Old 05-22-2012, 05:27 PM   #10 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

I prefer the standard valves. Taking cart valves apart is a lot more painful than 1 jam nut.

To convert you'd need to pull that internal sleeve. You'd also have to deal with the nutsert. On a cart valve gun, there's just a small hole there and the grip frame screw goes directly into the valve. Not sure how that would work with the nutsert or the giant hole with the nutsert removed.
__________________
Feedback

Quote:
Originally Posted by senghing27
ooops
Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Sheridan

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:16 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC