| ||Thread Tools||Search this Thread|
|09-20-2012, 11:38 AM||#1 (permalink)|
Join Date: Aug 2009
Location: Charlotte, NC
Cartridge Valve leak
I have had a leak down the barrel for far longer than I wanted to on my PGP2k.
I did not draw a line down the side and now I'm not sure where it should go together. The leak is not instant, but makes the gun unusable.
EEGR - NC Resident
|09-20-2012, 11:48 AM||#2 (permalink)|
Home of the lama
For me, the easy way to line the valve hole - grip screw is to simply put grip screw in valve a bit and then put valve in bottom tube with grip screw in slot and align air port hole with the center of tubes... Now mark it with scribe.
Hope this helps you.
The new sheriff in town.....
|09-20-2012, 08:08 PM||#3 (permalink)|
Join Date: Jun 2008
Location: looking through the knotholes in granny's wooden leg
Stuff I want or need evenually
|09-23-2012, 12:35 AM||#4 (permalink)|
ediT: I read everThing ALL wrong
I goT reallY worried There for a sec. ThoughT I messed up mY rebuild somehow...
Paintball only Facebook I started so I can pretend to be cool. Add me or don't. https://www.facebook.com/melvin.brumski
Things I would like to purchase with American dollars:
1: Power Paintball Products Scorpion paintball marker (semi auto right feed spyder clone, not the old kenimex)
2: Cheapish VSC Phantoms/parts
3: Dragon barrel plugs!
4: 2X spyder mr1
5: Skanline VTS for VM68
Last edited by Melvin; 09-23-2012 at 12:41 AM.
|Thread Tools||Search this Thread|