mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 09-23-2012, 10:01 PM   #1 (permalink)
Walking without rhythm
 
Stilgar's Avatar
 
Join Date: Jul 2009
Location: North of 49

CCM Fan
Brass N Wood Fan
Palmers Fan
Help?

OK, What have I done?

I have for all intents and purposes...a KP2. (its shorter than a normal KP2 but all the parts are the same...)

I pulled the cart valve out to replace the seals. I put everything back in from the front (cant get the trigger group off. The pin holding it in is very tight and I don't have any means to safely remove it.)

Mainspring, hammer, valve.

Now I try to pump it and it will only move a bit backwards (with a lot of force) and then on the trigger pull it the hammer only comes a tad bit forwards and does not hit the valve...

Its like the hammer is jammed. On what I don't know. I have moved the bolt lug out of the way...the sear hooks clear the hammer...there is nothing left!

help?
__________________

My business card says "Your in luck, I do two things..."
Stilgar is offline   Reply With Quote
Old 09-23-2012, 10:11 PM   #2 (permalink)
Walking without rhythm
 
Stilgar's Avatar
 
Join Date: Jul 2009
Location: North of 49

CCM Fan
Brass N Wood Fan
Palmers Fan
I think i got it now
__________________

My business card says "Your in luck, I do two things..."
Stilgar is offline   Reply With Quote
Old 09-23-2012, 10:17 PM   #3 (permalink)
Walking without rhythm
 
Stilgar's Avatar
 
Join Date: Jul 2009
Location: North of 49

CCM Fan
Brass N Wood Fan
Palmers Fan
Ah ****STOCKINGS!!! Now the dam thing is venting 12gs again...

Strait down the barrel and the bottom.

Man this gun is beginning to piss me off.
__________________

My business card says "Your in luck, I do two things..."
Stilgar is offline   Reply With Quote
Old 09-24-2012, 05:42 PM   #4 (permalink)
Post Whore
 
ksciupider's Avatar
 
Join Date: Nov 2010
Location: NC

Brass N Wood Fan
Palmers Fan
RTP Fan
Cart valve in backwards?
__________________
Quote:
Originally Posted by Party View Post
They always get moody after you try to **** with them.
Now what's a cocker?
Women are a lot like Pokemon, it doesn't matter how good you are, You cant catch any if you don't have any balls.

Ksciupider's Feedback
http://www.mcarterbrown.com/forums/f...-feedback.html
ksciupider is offline   Reply With Quote
Old 09-24-2012, 05:50 PM   #5 (permalink)
Brass Monkey Customs
 
tymcneer's Avatar
 
Join Date: Oct 2006
Location: Bowie MD

Brass N Wood Fan
Kilt Fan
The best option is to remove the trigger group (I know this is not what you want to hear.) Use a small nail as a punch to drive the pin out. The reason is, I suspect the spring and spring guide are not going all the way into the trigger group, which would cause the hammer to hold the valve open.

Ty
__________________

Brass Monkey Customs

Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685

Still selling brass tubing, with .678 barrel stock now available!

My feedback: MCB - eBay - AO
tymcneer is offline   Reply With Quote
Old 09-24-2012, 05:55 PM   #6 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Was this a conversion? My guess on your initial problem was that the spring wasn't actually going into the trigger group. For the leaking issue, does it stop when you pump it again or just vent all the way out? The only seals that can really cause a huge leak on those cart valves would be the 12g face seal and the "cup seal" on the valve.
__________________
Feedback

Quote:
Originally Posted by senghing27
ooops
Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Old 09-26-2012, 10:21 AM   #7 (permalink)
Walking without rhythm
 
Stilgar's Avatar
 
Join Date: Jul 2009
Location: North of 49

CCM Fan
Brass N Wood Fan
Palmers Fan
Quote:
Originally Posted by ksciupider View Post
Cart valve in backwards?
Nope

Quote:
Originally Posted by tymcneer View Post
The best option is to remove the trigger group (I know this is not what you want to hear.) Use a small nail as a punch to drive the pin out. The reason is, I suspect the spring and spring guide are not going all the way into the trigger group, which would cause the hammer to hold the valve open.

Ty
I will look into that. That might be the issue. I solved the Binding issue but you may be onto something.

Quote:
Originally Posted by MaD View Post
Was this a conversion? My guess on your initial problem was that the spring wasn't actually going into the trigger group. For the leaking issue, does it stop when you pump it again or just vent all the way out? The only seals that can really cause a huge leak on those cart valves would be the 12g face seal and the "cup seal" on the valve.
Custom. Yup it just vents.

I am going to check the spring seating as suggested and the face seal again...

Will report back.
__________________

My business card says "Your in luck, I do two things..."
Stilgar is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Sheridan

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC