| ||Thread Tools||Search this Thread|
|11-06-2012, 03:36 PM||#1 (permalink)|
Fantasy Hockey Chump
Removing stripped Tube Connector screws
I've struggled with this over the years. The air-thru screws on a LB or SB that hold the external air line down.
When the allen head is stripped out how do you remove them?
In the past I've cut notches in the face and tried to use a screw driver, but if I remember correctly that wasn't perfect.
Follow up question....where am I going to get new ones?
|11-06-2012, 06:26 PM||#2 (permalink)|
brassmage and necrotech
Join Date: Jan 2007
Location: cape may, new jersey
a steady hand with a dremel can make a nice flathead notch, but as you said , not perfect and you have to be careful not to go too deep... i've seen these on asp's site, but not sure if they'd be a bolt-in replacement, maybe email 'em and ask?
ASP Online Store: Clippard 10-32 Banjo Screw (2 pk.)
Chaotic Creations Ltd. http://www.mcarterbrown.com/forums/a...ml#post2095803 ---currently buried in work!
looking for: working ATS preferably with straight asa, brass sheridan donors/bits, vert feed micromag/ule body, green/camo SP wood grips for cf frames
happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html
|11-07-2012, 05:49 PM||#3 (permalink)|
Join Date: Jun 2008
Location: looking through the knotholes in granny's wooden leg
I have made this thread more that once with out a good answer. Will be watching for any new ideas.
Stuff I want or need evenually
|11-07-2012, 07:30 PM||#4 (permalink)|
Join Date: Oct 2007
Location: A2, Michigan
Sometimes you can mash in a torx bit and get a bite with that. Heat might help too but you'd also be replacing the soft seals.
|Thread Tools||Search this Thread|