WALZ Carbine Mares Leg FSR PGP Build (Completed 1-16-13) - Page 2

dundadun · 11-20-2012, 08:24 PM

That is not the feedtube up front is it?

WALZ · 11-21-2012, 04:28 PM

Worked on this one a bit more and instead of using a
modified stock pistol group I just drilled out the bottom of
the rva and notched it for a long single lobe trigger,
added pin and spring. Works good and is super simple.
I also made the stock and the foregrip and cleared it out for the
trigger assembly.
Still a lot to go but she's shaping up...
The front tube is going to store the first strike rounds I'm thinking.

Here are some pics of it so far...

Attachment 36221

Attachment 36222

Attachment 36223

Attachment 36224

matteekay · 11-21-2012, 04:35 PM

This is looking really, really cool. Bolt action? Pump?

And that woodwork... mmmmmmmm.

nickydp33 · 11-21-2012, 04:37 PM

I really am enjoying this build, beautiful work

Bored383 · 11-21-2012, 04:39 PM

mattee - I am wagering lever action . . . cuz it's a mare's leg

:P

matteekay · 11-21-2012, 04:44 PM

Right, but Walz hasn't done a....

{sees the side plate cutout}

Oh.

OH.

[Takei] OHMYYYYYYYYYY. [/Takei]

dundadun · 11-21-2012, 08:28 PM

Quote:

Originally Posted by WALZ

I also made the stock and the foregrip and cleared it out for the
trigger assembly.
Still a lot to go but she's shaping up...
The front tube is going to store the first strike rounds I'm thinking.

You made that stock? Woooooow

WALZ · 11-21-2012, 10:34 PM

Yes, I have to admit I made the stock, used a piece of claro walnut I just bought. (three days work and the wife loves it, said its my best one so far but she has said that about the last four or five builds I have done - I love her ).
Trying to make it look like a mares leg carbine stock and I think
after I get the brass work complete and the faux lever done it is going to be close.
This was requested to be a bolt action (someday I will do levers).
I am now working on the sliding breach cover/bolt arrangement ...

matteekay · 11-22-2012, 12:06 AM

Wally,

What's holding the foregrip on?

matteekay · 11-22-2012, 12:07 AM

Wally,

What's holding the foregrip on?

11-20-2012, 08:24 PM	#11 (permalink)
dundadun Boom. Yummy Join Date: Jul 2007 Location: SoCal	That is not the feedtube up front is it? __________________ __________________ Pirate Intimidator and the Most Comfortable Gun Ever Dukie Lever Gun and now Smiley-ized Feedback For sale: k Stock and Random bits for sale as well as items I want to buy!

11-21-2012, 04:28 PM	#12 (permalink)
WALZ MCB Member Join Date: Nov 2010 Location: coarsegold,ca	Worked on this one a bit more and instead of using a modified stock pistol group I just drilled out the bottom of the rva and notched it for a long single lobe trigger, added pin and spring. Works good and is super simple. I also made the stock and the foregrip and cleared it out for the trigger assembly. Still a lot to go but she's shaping up... The front tube is going to store the first strike rounds I'm thinking. Here are some pics of it so far... Attachment 36221 Attachment 36222 Attachment 36223 Attachment 36224 __________________ WALZ Feedback Last edited by WALZ; 06-03-2013 at 09:02 PM.

11-21-2012, 04:35 PM	#13 (permalink)
matteekay 5 Past Hammer 7ime Join Date: Dec 2010 Location: Aliso Viejo, CA	This is looking really, really cool. Bolt action? Pump? And that woodwork... mmmmmmmm. __________________ FST: "Saved by the Bell" '03 Viking FS: FLASC Barrel Kit, SA-17 Bottomline / Dummy 12g, BBT Stock, Arm Pads WTB: AKA Viking Trigger Sear Feedback

11-21-2012, 04:37 PM	#14 (permalink)
nickydp33 Real Nurse Join Date: Nov 2009 Location: Chicago	I really am enjoying this build, beautiful work __________________ http://www.mcarterbrown.com/forums/f...ml#post1119283 Feedback

11-21-2012, 04:44 PM	#16 (permalink)
matteekay 5 Past Hammer 7ime Join Date: Dec 2010 Location: Aliso Viejo, CA	Right, but Walz hasn't done a.... {sees the side plate cutout} Oh. OH. [Takei] *OHMYYYYYYYYYY.* [/Takei] __________________ FST: "Saved by the Bell" '03 Viking FS: FLASC Barrel Kit, SA-17 Bottomline / Dummy 12g, BBT Stock, Arm Pads WTB: AKA Viking Trigger Sear Feedback

11-21-2012, 10:34 PM	#18 (permalink)
WALZ MCB Member Join Date: Nov 2010 Location: coarsegold,ca	Yes, I have to admit I made the stock, used a piece of claro walnut I just bought. (three days work and the wife loves it, said its my best one so far but she has said that about the last four or five builds I have done - I love her ). Trying to make it look like a mares leg carbine stock and I think after I get the brass work complete and the faux lever done it is going to be close. This was requested to be a bolt action (someday I will do levers). I am now working on the sliding breach cover/bolt arrangement ... __________________ WALZ Feedback

11-22-2012, 12:06 AM	#19 (permalink)
matteekay 5 Past Hammer 7ime Join Date: Dec 2010 Location: Aliso Viejo, CA	Wally, What's holding the foregrip on? __________________ FST: "Saved by the Bell" '03 Viking FS: FLASC Barrel Kit, SA-17 Bottomline / Dummy 12g, BBT Stock, Arm Pads WTB: AKA Viking Trigger Sear Feedback

11-22-2012, 12:07 AM	#20 (permalink)
matteekay 5 Past Hammer 7ime Join Date: Dec 2010 Location: Aliso Viejo, CA	Wally, What's holding the foregrip on? __________________ FST: "Saved by the Bell" '03 Viking FS: FLASC Barrel Kit, SA-17 Bottomline / Dummy 12g, BBT Stock, Arm Pads WTB: AKA Viking Trigger Sear Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search