| ||Thread Tools||Search this Thread|
|01-05-2013, 01:44 PM||#1 (permalink)|
Join Date: Sep 2006
Location: Los Angeles, formerly Western MA
KP3 lower tube
So I'm looking at picking up a Kp-3 but it's missing the piece that threads in for the air line on the lower tube. Is that just a standard asa thread? Could I just screw in a remote line piece into that?
|01-05-2013, 02:18 PM||#2 (permalink)|
No, you need to replace it with a Sheridan CA adapter. You can convert any size to fit with a KP. There is a nice step-by-step on here about it somewhere.
Or purchase a replacement one.
The first KP I bought didn't have one either. I found a replacement, but the original ones were prone to crack where the 90 screws in. Make sure if you find a used one that it doesn't have any cracks.
|01-06-2013, 08:31 PM||#5 (permalink)|
brassmage and necrotech
Join Date: Jan 2007
Location: cape may, new jersey
or buy one... (shameless plug)
Chaotic Creations Ltd. http://www.mcarterbrown.com/forums/a...ml#post2095803 ---currently buried in work!
looking for: AGA62-working or not-for prop use, working ATS lowers and parts, brass sheridan donors/bits, green/camo SP wood grips for cf frames, havoc launcher, high output 4.5k regs
happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html
|Thread Tools||Search this Thread|