| ||Thread Tools||Search this Thread|
|02-13-2013, 02:58 AM||#13 (permalink)|
Join Date: Dec 2010
Location: Fascist Valley
I need YOU to build me a custom Sheridan body! or Sell Me Your PMI-I, P68-SC or P-12 Complete Gun or Just the Body!
"Have You Seen Molly?"
Fall in Love With Your [Working] Thumper All Over Again!
WTB Sheridan Parts/Upgrades (Sight Rail & Cooper-T bolts/CA adapters/ASAs)
|02-15-2013, 12:04 AM||#14 (permalink)|
How I am making a freak sheridan...
Cut a stock barrel to 3 13/16" length (bolt/feed section).
Save both pieces
Cut a 6 3/8" long piece of tube (7/8 o.d. - .030 wall ) for sleeve and
cut a new feed hole centered at 3 3/16".
Slide bolt section of barrel into sleeve and align holes.
Bad picture of a pgp feedtube. find one that fits the inserts firmly -(some fit insert to loose to work properly).
Cut to length of insert..
Slide the cut feedtube into the front of the barrel assembly.
Slide a insert into the body making sure they fit to the end.
Cut a feedtube at 2/1/2" longer than front barrel section and insert barrel into sleeve (tube)..
Slide body and barrel end together making sure of fit.
Lastly, here is how I am locking them together.
Front barrel sleeve has a hole that aligns with screw to lock-in.
(will be changed to a nylon thumb screw).
I did have to hone the exterior of the barrel sections and the feedtube for a nice firm fit....
Hope I didn't miss anything and enjoy making your own.
This all needs to be soldered together and I drilled plug holes in bottom section and soldered that way..
Last edited by WALZ; 08-24-2013 at 01:08 PM.
|02-25-2013, 08:23 PM||#17 (permalink)|
So it's a set screw? huh. That makes swapping barrels easy.
|02-25-2013, 10:15 PM||#18 (permalink)|
Deluxe super psychedelic
I think I may want walz to re-barrel my kp.....
Photo blog: http://bluemorocco.blogspot.com/
If you are straight with me, I am straight with you : http://www.mcarterbrown.com/forums/f...-feedback.html
Created by Shade, stolen from foughtwolf's sig
|02-25-2013, 10:30 PM||#19 (permalink)|
I thought it looked like 2 tubes sleeved over each other. I wondered how you kept the ID nice and true, this is a great idea, i have a feeling you will have a lot of people asking you to do this for them. Sleek, versatile and effective, whats not to love?
|03-04-2013, 11:15 PM||#20 (permalink)|
Made some different feed sytems for the " everything you could want on a sheridan".
All pics are of the same marker only the feeds make it a four in one (5 in one with first strikes).
Here are some pics of each feed system on marker...
First is s/c horiz feed
Second is a horiz spring feed
Third is a off-set vertical feed
And forth pic is 45* feed right side
Last pic is everything shown together...
Still a bunch to go but starting to get somewhere..
|Thread Tools||Search this Thread|