mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Sheridan (http://www.mcarterbrown.com/forums/sheridan/)
-   -   How to make a trigger.. (http://www.mcarterbrown.com/forums/sheridan/248462-how-make-trigger.html)

BigMatt-MadCustoms 12-30-2013 10:28 PM

How to make a trigger..
 
5 Attachment(s)
OK first.. when you get a little free time on the CNC mill.. make a few blanks like these
Attachment 42672

Then bend a little tail on them
Attachment 42673

Then give them a little twist and a tweak..
Attachment 42674

Pretty close to the original eh?
Attachment 42675

And the final result.... these will be used on some future builds
Attachment 42676

rgunn4 12-31-2013 11:53 AM

Looks pretty much like the same trigger to me. Nicely done. What kind of build needs so many triggers? Will it be some kind of SteamPunk rifle? ;)

Clearush 12-31-2013 06:21 PM

Quote:

Originally Posted by rgunn4 (Post 2871706)
Looks pretty much like the same trigger to me. Nicely done. What kind of build needs so many triggers? Will it be some kind of SteamPunk rifle? ;)

A run of MADrifles that started 5 years ago :old: and is on its way to being completed after Matt had stretch of life slapping him around.

BigMatt-MadCustoms 12-31-2013 06:28 PM

Quote:

Originally Posted by Clearush (Post 2871905)
A run of MADrifles that started 5 years ago :old: and is on its way to being completed after Matt had stretch of life slapping him around.

Only a couple of these will be used on this run of rifles, I have original triggers for most of them.... :)

This run will however dry up my supply...

funsi00 12-31-2013 07:54 PM

That is cool, never seen a trigger made before!

Axel 01-02-2014 03:07 AM

Pretty cool. What material did you use? What is the purpose of the extra holes?

BigMatt-MadCustoms 01-02-2014 05:22 PM

Quote:

Originally Posted by Axel (Post 2872544)
Pretty cool. What material did you use? What is the purpose of the extra holes?

Not exactly sure what the steel is but it is 2.4mm thick mildly heat treatable scrap sheetmetal from my real job...

The extra holes are 3mm thru holes that are used to bolt the metal to my fixture while I zip them out on the CNC mill..

bob_wuzza 01-02-2014 10:54 PM

Quote:

Originally Posted by BigMatt-MadCustoms (Post 2872934)
Not exactly sure what the steel is but it is 2.4mm thick mildly heat treatable scrap sheetmetal from my real job...

The extra holes are 3mm thru holes that are used to bolt the metal to my fixture while I zip them out on the CNC mill..

Why not brass?

weekendballer 01-02-2014 10:59 PM

i would think brass as a trigger would be to soft it would flex and bend with use.

sniper42 01-03-2014 01:12 AM

Plus having brass as the sear surface, it would wear excessively and eventually it would round over.


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC