mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Sheridan (http://www.mcarterbrown.com/forums/sheridan/)
-   -   pmi-2 not cocking ? (http://www.mcarterbrown.com/forums/sheridan/2569-pmi-2-not-cocking.html)

Myke 08-14-2006 08:36 PM

...

Crash 08-14-2006 08:50 PM

Well.....
1) does it have an RVA built into the ASA?
2)have you had the ASA off?
It could be the spring is shimmed/rva is too far in and stopping the hammer from catching on the sear.
3)have you checked the sear or the catch on the hammer for damage?
As for the screws I would try the local hardware store if you want them. I ran my SB for years without them, just rember to keep the frame screw tight! Hope this helps.

WilD 08-15-2006 10:55 AM

Quote:

Originally Posted by Crash
Well.....
As for the screws I would try the local hardware store if you want them. I ran my SB for years without them, just rember to keep the frame screw tight! Hope this helps.

I definitely recommend you replace the screws sooner rather than later. If the ASA moves around excessively, which it likely will, it will put added strain on the rigid gasline. The gasline will eventualy develope a leak, and that is a pita to fix.


All times are GMT -4. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC