Paintball

[HurtCow]

Originally Posted by dsergison

I countersink those pesky screws.... with a little backside countersink that i drop in through the hole then grab with a drill.

-since there is no access for a normal one.

in fact the countersink looks a lot like a little flat head screw.

you can in fact make one from a screw. that will get you a couple uses.

take a screw and cut it with a dremmel so it has teeth like a countersink using a dremmel cut off wheel. it'll still cut the pot metal frame pretty easy even if you do a halfway incompetent job.

Hmm...I'll be stopping at the hardware store on the way home, and I know what I'll be doing tonight. That's a great idea.

[dsergison]

my reverse c-sink tool is the 1" long screw looking thing in front of the drill chuck

I didnt actually make mine from a screw, but it can be, just use the next size larger screw than what you want to c-sink

cut it to resemble this, except with a shank in front obviously

[Gazoo]

Ill just buy K frames. Much better feel.....

[dsergison]

oh i'm just throwing out the ideas...

I agreed to make a countersink for a guy here... I'll make several and offer them up for sale when i get them done.