|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
02-09-2008, 03:00 PM
| #1 (permalink) |
| Rec Poster  Join Date: Jan 2008 | Non-Cartridge Valve Dissasembly I was recently able to get a hold of a non-cartridged PGP, and I am now in the process of replacing the seals in the valve as it is leaking. I recently purchased a valve tool from PPS, and have been following the directions for taking apart a non-cartridged PGP on pgpog.org, but the step where you thread the tool onto the valve and then pull it out isn't working out so well for me. Im pulling pretty hard, but not too hard as I don't want to break anything, but its still not coming out. Any suggestions? Thanks.
__________________ MCarterBrown Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Ebay Feedback: http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback |
|  |
|
02-09-2008, 03:10 PM
| #2 (permalink) | |
| MCB Member  Join Date: Apr 2006 Location: NC | there is a lead seal that should be picked out first, then it'll pull out. i've pulled them with the lead seal still in sometimes. you just have to pull hard.
__________________ Quote:
| |
|
| |
|
02-09-2008, 03:28 PM
| #3 (permalink) |
| Rec Poster Join Date: Jan 2008 | Alright, good, I got it. Now the rest won't come out. Any suggestions?
__________________ MCarterBrown Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Ebay Feedback: http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback |
|
| |
|
02-09-2008, 04:47 PM
| #4 (permalink) | |
| MCB Member Join Date: Apr 2006 Location: NC | read this thread and you should be able to get the rest of the parts out. Valve Punch Tool? (And another rebuild question)
__________________ Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
