Before I bust out the hammer..

Mayvik · 02-26-2008, 09:03 AM

The non-cartridge valve in a Long Barrel should just pop out the back the same was as any other, right? I've dissected everything with the valve tool, and I'm assuming the plug is just rusty/gunked up.

chicken_hawk · 02-26-2008, 09:05 AM

Could have the lead ring in it still. I generally drop in a 12 gram once the pierce pin and valve nut are out and just crank the 12 gram in and out pops a stuck front part of the valve.

Mayvik · 02-26-2008, 09:18 AM

Quote:

Originally Posted by chicken_hawk

Could have the lead ring in it still. I generally drop in a 12 gram once the pierce pin and valve nut are out and just crank the 12 gram in and out pops a stuck front part of the valve.

Well it's C/A so there's no pierce pin, but that's what I was thinking, using 2 (or maybe 3) spent 12s down the front tube + hammer. The lead washer came out with the jam nut, as did the o-ring, so I'm looking at just the chamber plug left in there.

El Gringo · 02-26-2008, 01:11 PM

It is threaded on. Your valve tool should have a female threaded side for the removal

Step 8 and 9
<A HREF='http://pgpog.org'>PGPOG - The PGP Owners Group</a> - Non-Cartridge Valve Sheridan Disassembly

Mayvik · 02-26-2008, 01:28 PM

Sorry, I should have been more clear. I've gotten the jam nut and the valve body itself out using the tool, it's the chamber plug piece that's still stuck in there. I actually used the PGPOG directions, but since I don't have (or need, since I don't have to worry about fubaring my pierce pin) a valve punch tool, I stopped when they got PGP specific.

kidneythief · 02-26-2008, 06:13 PM

You dont pull anything else out. IIRC that last piece is soldered in...at least thats how it is on mine.

-Jake

c6quad · 02-26-2008, 07:04 PM

Quote:

Originally Posted by kidneythief

You dont pull anything else out. IIRC that last piece is soldered in...at least thats how it is on mine.

-Jake

correct.

02-26-2008, 09:03 AM	#1 (permalink)
Mayvik 1-866-MEAT-4-YU Join Date: May 2007 Location: Binghamton NY	Before I bust out the hammer.. The non-cartridge valve in a Long Barrel should just pop out the back the same was as any other, right? I've dissected everything with the valve tool, and I'm assuming the plug is just rusty/gunked up.

02-26-2008, 09:05 AM	#2 (permalink)
chicken_hawk Active Member Join Date: Jul 2006 Location: Minneapolis	Could have the lead ring in it still. I generally drop in a 12 gram once the pierce pin and valve nut are out and just crank the 12 gram in and out pops a stuck front part of the valve. __________________ Damage Inc.

02-26-2008, 01:11 PM	#4 (permalink)
El Gringo Post Whore Join Date: Apr 2006	It is threaded on. Your valve tool should have a female threaded side for the removal Step 8 and 9 <A HREF='http://pgpog.org'>PGPOG - The PGP Owners Group</a> - Non-Cartridge Valve Sheridan Disassembly __________________ ..... Have a Grateful Day! EL Gringo's Feedback Buy my Black Phoon

02-26-2008, 06:13 PM	#6 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!!	You dont pull anything else out. IIRC that last piece is soldered in...at least thats how it is on mine. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) MCB Moderator Kidney Machine

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-26-2008, 01:28 PM	#5 (permalink)
Mayvik 1-866-MEAT-4-YU Join Date: May 2007 Location: Binghamton NY	Sorry, I should have been more clear. I've gotten the jam nut and the valve body itself out using the tool, it's the chamber plug piece that's still stuck in there. I actually used the PGPOG directions, but since I don't have (or need, since I don't have to worry about fubaring my pierce pin) a valve punch tool, I stopped when they got PGP specific.